توضیحات
چکییده
ديوار برشي يكي از عناصر سازه اي مقاوم در برابر زلزله مي باشد كه در اكثر ساختمان هاي بتني موجود يا مقاوم سازي شده به كار ميرود. گاهي اوقات به دليل محدوديت هاي معماري و همچنين مشكلات قالب بندي، ديوار برشي با يك خروج از محوريت نسبت به محور قابي كه در آن قرار دارد ساخته مي شود؛ همچنين در استفاده از ديوار برشي براي مقاوم سازي سازه هاي موجود، به دليل محدوديت هايي كه در حين اجرا وجود دارد، ديوار برشي با در نظر گرفتن خروج از مركزيت نسبت به قاب اجرا ميشود. اين در حالي است كه در آيين نامه ACI318و آيين نامه بتن ايران (آبا) در مورد خروج از محوريت ديوار برشي به ضابطهاي اشاره نشده است. اين خروج از محوري ديوار برشي ميتواند باعث ايجاد پيچش در المان مرزي ديوار برشي شود. براي بررسي اثرات اين پيچش، 3قاب دو بعدي داراي ديوار برشي با تعداد طبقات 6 ،9و 12در دو حالت بدون خروج از محوري و همراه با خروج از محوري ديوار با استفاده از تحليل استاتيكي غيرخطي با رژيم هاي مختلف بارگذاري توسط نرمافزار المان محدود Abaqusمورد بررسي قرار گرفت. قابهاي دوبعدي اشاره شده، از ساختمانهاي مورد نظر كه به صورت سه بعدي و با استناد به ويرايش سوم استاندارد 2800ايران و آييننامه آبا تحليل و طراحي شده بودند، استخراج گرديده است. نتايج به دست آمده حاكي از آن است كه با زياد شدن خروج از محوريت ديوار برشي، پيچش به وجود آمده در المان مرزي به صورت قابل توجهي افزايش مييابد و لذا در نظر گرفتن اثرات اين پيچش در طراحي المان مرزي شايسته توجه ميباشد.
مقدمه
ديوارهاي برشي بتني از عناصر مقاوم موثر در برابر نيروهاي جانبي ناشي از زلزله ميباشند. اين ديوارها در كنار مقاومت و سختي قابل توجهي كه دارند، ظرفيت شكل پذيري بسيار خوبي در مقابل حركات قوي زلزله دارا ميباشند .احداث ديوار برشي چه در ساختمان هاي بلند و چه متوسط موجب مي شود كه مقاومت ساختمان بطور قابل توجهي افزايش يابد و نشان داده شده است كه در مقايسه با قابهاي خمشي اقتصادي تر خواهد بود . امروزه به خوبي مي توان از ديوارهاي برشي در كنار قابهاي خمشي به نحوي استفاده كرد كه رفتار مجموعه سازه مقاوم و شكل پذير باشد. در هر حال پاسخ اين قبيل سازه ها در برابر زلزله هاي شديد نيز پاسخي خمشي و شكل پذير است.
ABSTRACT
The shear wall is one of the earthquake-resistant structural elements used in most of the concrete structures available or refurbished. Occasionally due to architectural constraints and also molding problems, the shear wall is made with an exit from the center of the frames to which it is located; also, in the use of a shear wall for the reinforcement of existing structures, due to limitations Which runs during execution, the shear wall is executed with respect to the exit from the center relative to the frame. However, in the ACI318 regulations and the Iran Concrete Regulation (ABA), no mention is made regarding the removal of the shear wall. This exit from the axial wall of the shear wall can cause torsion in the shear wall elemental element. To investigate the effects of this twist, three 3-dimensional two-dimensional frame with a slab wall with 6, 9 and 12 floors in two states without exiting from the axis along with exiting the wall axis using static nonlinear analysis with different loading regimes were investigated by the Abaqus finite element software. Took The two-dimensional frames mentioned have been extracted from the buildings in question, which were designed in three dimensions, referring to the third edition of Standard 2800 Iran and the ABA Regulations. The results show that with increasing exiting of the shear wall, the torsion created in the boundary element increases significantly and therefore consideration of the effects of this twist on the design of the boundary element is worthy of attention.
INTRODUCTION
Concrete shear walls are effective elements against earthquake forces. These walls, besides their considerable strength and stiffness, have a very good ductility capacity against strong earthquake movements. The construction of a shear wall, both in high and medium-sized buildings, makes the building’s strength significantly increased and shown Which will be more economical compared with the flexural frames. Nowadays, it is possible to use the shear walls along the bending frames in such a way that the behavior of the structure set is robust and ductile. In any case, the response of such structures to severe earthquakes is also a bending and reflexive response.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Seyyed Mohammad Motaali Emami, Abbas Ali Tesenimi
File Information: English Language/ 8 Page / size: 1,03 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : سيد محمد متولي امامي ،عباس علي تسنيمي
اطلاعات فایل : زبان انگلیسی / 8 صفحه / حجم : KB 1,03
نقد و بررسیها
هنوز بررسیای ثبت نشده است.