توضیحات
خلاصه
در اين پژوهش شش ترکيب مختلف که پتانسيل استفاده در توليد جرمهاي نسوز کـم سـيمان اسـپينلي دارنـد شامل بوکسيت و من يزي ت کلسينه، آلومين کلسينه و منيـزيت کلـسينه، سـيمان نـسوز و ميکروسـيليس، آلـومین کلسینه و ميکروسيليس، بوکسيت و پوسته اکسیدي و آلـومين کلـسينه و پوسـته اکـسیدي مـورد مطالعـه قـرار گرفت. نمونه ها پس از پرس و خشک شدن در دماي 1400 ºCبه مدت 2ساعت قرار گرفتند و آزمايشات XRDبه منظور شناخت فازهاي بوجود آمده انجام شد. با تشريح فازهاي دیر گداز و يا زودذوب در هريک از جفت هاي ترکيبي شش گانه که در متن مقاله بررسي شده اسـت چنـين نتیجـه گیری گرديـد کـه بوکـسيت اگر يگيت(کلوخه ) پایدار و ميکروسيليس بایندر (پیوند دهنده) مشکل آفرين اسـت کـه مقـدار آن در ترکيـب جرم ها باید به حداقل کاهش يابد. برای ایجاد اسپينل درجا از نوع MgAl2O4 تلفیق آلومين کلسينه و منیزیت کلسینه بهترين همبسته و براي ایجاد اسپينل هرسيتيني از نوع FeAl2O4 تلفیق آلومين کلسينه و پوسته اکسیدی نورد مناسب مي باشد.
مقدمه
استفاده از جرم هاي ديرگداز امروزه در صنايع مختلف از جمله صنايع فولاد كه نياز به استفاده از موادي با مقاومت در شرايط مختلف در فرايندهاي فولادسازي دارند، به شدت گسترش يافته است . از طرف ديگر جرم هاي ريختني متداول به دلايل مختلفي مانند استحكام كم، ديرگدازي پايين و ساير مشكلات مربوط به استفاده از سيمان در آنها براي چنين كاربردهايي چندان مناسي نبوده و در سالهاي اخير دسته جديدي از اين جرم ها با عنوان جرم هاي كم سيمان مورد توجه قرار گرفته اند.
ABSTRACT
In this study, six different combinations that the potential for use in the production of castables of low cement spinel include bauxite and I Yzy of calcined, alumina calcined magnesite calcination, refractory cement and silica fume, alumina calcined and silica fume, bauxite and shell oxide and alumina calcined and shell Oxidation was studied. By describing the phases of refractory or Zvdzvb in each pair combined six in the paper has been studied so concluded that bauxite if Ygyt (lumps) stable and fume binder (linker) is problematic that the amount of the compound The masses must be reduced to a minimum.
INTRODUCTION
The use of refractory materials in today’s various industries, including the steel industry, which requires the use of materials with resistance in various conditions in steel making processes, has expanded rapidly. On the other hand, conventional soldering masses for various reasons such as low strength, low refraction and other problems with the use of cement in them for such applications are not very useful and in recent years, a new category of these masses known as low cement mass attention Are.
Year: 2007
Publisher : 11th annual congress of Iranian Metallurgical Engineers Association
By : Masoumeh Baghand, Ahmad Manshei, Rahmatollah Emadi
File Information: English Language/ 10 Page / size: 161 KB
سال : 1386
ناشر : يازدهمين کنگرهي سالانهي انجمن مهندسين متالورژي ايران
کاری از : معصومه پاغنده ، احمد منشی ، رحمت اله عمادي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 161
نقد و بررسیها
هنوز بررسیای ثبت نشده است.