توضیحات
چکیده
احداث سرريز و سدهاي انحرافي در محدوده پيچ رودخانه ها همواره مشكلاتي را در مراحل بهره برداري از نظر تراز سطح آب و بده جريان در عرض پديد مي آورد و عملكرد آبگيرهاي ساحل چپ و راست رودخانه را متفاوت مي سازد. اما در برخي شرايط ناگزير به احداث اين گونه سازه ها در محدوده پيچ رودخانه ها مي باشيم. يكي از فرضيه ها جهت برقراري توزيع يكنواخت تر جريان در عرض پيچ رودخانه، تساوي بده جريان در عرض تاج سرريز از طريق تغيير پروفيل تاج سرريز از حالت افقي به شيبدار است كه در موارد متعددي عدم توجه به اين مساله مشاهده مي شود. بررسي مطالعات گذشته نشانگر فقدان تحقيقات كافي در مورد كاركرد نا مناسب سرريزهاي افقي در پيچ آبراهه مي باشد. در اين راستا اين تحقيق با استفاده از تحليل هندرسون (1966) تئوري طرح سرريز در پيچ آبراهه را ارائه كرده و با مطالعه آزمايشگاهي به بررسي و مقايسه كاركرد سرريزهاي با تاج افقي در راستاي مستقيم و در محدوده پيچ كانال مي پردازد. نتايج حاصل از آزمايشات حاكي از كاركرد مناسب اين سرريزها در راستاي مستقيم و عدم توزيع يكنواخت جريان در محدوده پيچ آبراهه بوده و بنايراين از كاربرد اين سرريزها در محدوده پيچ رودخانه ها بايد اجتناب گردد.
مقدمه
سرريزها، سازه هاي هيدروليكي ساده اي هستند كه به منظور كنترل سطح آب و اندازه گيري جريا ن در كانال هاي آبياري مورد استفاده قرار مي گيرند. سهولت و دقت اندازه گيري دبي در شرايط مختلف جريان سبب طراحي اشكال مختلف سرريز گرديده است. در معمولي ترين تقسيم بندي ها، سرريزها به سه گروه <سرريزهاي لبه تيز >،« سرريزهاي لبه تخت »< سرريزهاي لبه كوتاه> طبقه بندي مي شوند. در سرريزهاي لبه تيز، طول تاج در امتداد جريان كمتر و يا مساوي 2ميلي متر بوده و جريان از روي تاج با حركت پرتابي و بدون تماس با صفحه پايين دست ريزش مي يابد. در رودخانه ها به خاطر وجود تنش برشي زياد در بستر و ناچيز بودن آن در سطح آزاد آب، منجر به عدم يكنواختي پروفيل سرعت در جهت قائم مي شود.
ABSTRACT
The construction of overflows and diversion dams in the riverside range always has problems in the exploitation stages in terms of level of water level and flow of water in the course of the river and makes the performance of inland waterways of the river’s left and right sides different. But in some conditions, we have to construct such structures in the riverside range. One of the hypotheses in order to establish a more uniform flow distribution along the river’s crest, the drain flow equation in the width of the crater is through the change of the crown profile from the horizontal to slope, which is seen in many cases without paying attention to this problem. The study of previous studies indicates that there is a lack of adequate research on the inappropriate use of horizontal spillways in the waterway fault. In this regard, the present study, using Henderson’s (1966) analysis, proposed the theory of in-stream overflow design, and analyzes and compares the function of horizontal crowns in a straight line and in the range of the channel screw. The results of the experiments indicated that the proper functioning of these spillways in the direct direction and the lack of uniform distribution of flow in the range of the water screw, and hence the use of these spillways in the range of rivers screw should be avoided.
INTRODUCTION
Spillways are simple hydraulic structures that are used to control water levels and measure jars in irrigation canals. The ease and accuracy of flow measurement in different flow conditions has led to the design of different types of overflows. In the most common categorization, spillovers are classified into three groups: tangential overflows, “flat edge spillways”, “short edge spouts”. In sharp edges, the crown length along the flow is less than or equal to 2 millimeters, and the flow through the crown is shifted by moving and without touching the bottom plate. In rivers, because of the high shear stress in the bed and its low level in the free surface of the water, it leads to a lack of uniformity of the profile of the velocity in the vertical direction.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Maryam Abdollahpour, Mahdi Yassi, Jawand Bahmanesh
File Information: persian Language/ 8 Page / size: 479 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : مريم عبداالله پور ،مهدي ياسي ، جواد بهمنش
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 479
نقد و بررسیها
هنوز بررسیای ثبت نشده است.