توضیحات
چکیده
شیمی لومینسانس نشر نور بر اثر یک واکنش شیمیایی در دمای معمولی می باشد واکنش شیمی لومینسانس، تولید محصولات حد واسطی در ترازهای برانگیخته الکترونی می نماید که این محصولات در بازگشت به حالت اولیه نشر نور را ایجاد میکنند. اندازه گیری غلظت تتراسیکلینها به روش شیمی لومینسانس با استفاده از سیستم تزریق در جریان پیوسته بسیار حساس و گزینشپذیر است. دامنه خطی برای اندازه گیری تتراسایکلین و داکسی سایکلین از 10-4تا 10-8مول بر لیتر گزارش شده است. اساس این اندازه گیری اثر بازدارندگی تتراسایکلین و داکسی سایکلین بر واکنش شیمی لومینسانس میان لومینول و ید در محیط قلیایی می باشد. با توجه به این که در این روش امکان بهینه کردن شرایط واکنش وجود دارد. در این روش پیشنهادی نیز شرایط واکنش از جمله غلظت واکنشگرها، و سرعت جریان بهینه شده است. تحت شرایط بهینه منحنی کالیبراسیون به خوبی دامنه ی خطی اندازه گیری را نشان می دهد ( r2 = 0.9966برای تتراسایکلین و r 2 0.9964برای داکسی سایکلین گزارش شده است) حد تشخیص این روش برای تتراسایکلین و داکسی سایکلین 8.9 × 10-9مول بر لیتر گزارش شده است. این روش بسیار ساده، سریع، ارزان، حساس و گزینش پذیراست. همچنین به صورت کاملا موفقیت آمیز برای اندازه گیری تتراسیکلین ها در سرم خون مورد استفاده قرار گرفت.
مقدمه
لومینسانس فرایندی است که طی آن نور تولید می شود. در این فرآیند الکترون به تراز برانگیخته میرود و در بازگشت به یکی از ترازهای پایینتر که در بیشتر اوقات تراز پایه است نور نشر می شود. تکنیک لومینسانس را نشر سرد می گویند. چون عامل برانگیختگی حرارت نمیباشد. فرایند شامل دو بخش فیزیک لومینسانس و شیمی لومینسانس است. در هر روش ملکولهای آنالیت با جذب فوتون برانگیخته میشوند تا گونه بدست دهند که طیف نشری آنها اطلاعاتی برای تجزیه کمی در اختیار بگذارد. این روش ها را به طور کلی فوتولومینسانس ملکولی میگویند. شیمی لومینسانس نوعی از لومینسانس است که منبع انرژی برای انتقال الکترون به حالت برانگیخته یک واکنش شیمیایی می باشد و این یک اتفاق معمولی نیست هر چند بیشتر اوقات میزان انرژی آزاد شده در هر واکنش شیمیایی به اندازه کافی برای شیمی لومینسانس که تولید میشود زیاد نیست. در مورد آنالیت به طور مستقیم در واکنش شیمی لومینسانس درگیر است.
ABSTRACT
The luminescence chemistry of light diffusion is due to a chemical reaction at normal temperature. The reaction of luminescence chemistry produces intermediate products in electrically excited levels, which produce these products in a return to light emission. Measuring the concentration of tetracyclines by luminescence chemistry using a continuous injection system is highly selective. Linear amplitude has been reported to measure tetracycline and doxycycline from 10-4 to 10-8 moles / liter. The basis of this measure is the effect of tetracycline and doxycycline inhibition on the reaction of luminescence chemistry between luminol and iodine in an alkaline medium. Considering that this method allows optimization of reaction conditions. In this proposed method, the reaction conditions, including the concentration of the reactants, and the flow velocity are optimized. Under optimum conditions, the calibration curve shows well the linear amplitude of the measurement (r2 = 0.9966 for tetracycline and r.sub.2 0.9964 for doxycycline). The detection limit for tetracycline and doxycycline is 8.9 × 10-9 mmol / l Has been. This method is very simple, fast, cheap, sensible and selective. It was also successfully used to measure tetracyclines in blood serum.
INTRODUCTION
Luminescence is a process in which light is produced. In this process, the electron is excited to the level, and the light is released back to one of the lower levels, which is often the base level. The technique of luminescence is called cold publication. Because the excitation factor is not heat. The process consists of two parts: luminescence physics and luminescence chemistry. In each method, analyte molecules are stimulated by photon absorption in order to obtain a spectrum of their information for quantitative analysis. These methods are generally called molecular photoluminescence. Luminescence chemistry is a kind of luminescence that is a source of energy for electron transfer to an excited state of a chemical reaction, and this is not a common occurrence. However, most of the time, the amount of released energy in each chemical reaction is not sufficient enough for the luminescence chemistry produced. In the case of analyte, it is directly involved in the reaction of luminescence chemistry.
Year: 2017
Publisher : National Congress of Chemistry and Nanoscience, from Research to National Development
By : Mansouri, you know
File Information: persian Language/ 17 Page / size: 711 KB
سال :1396
ناشر : کنگره ملی شیمی و نانوشیمی,از پژوهش تا توسعه ملی
کاری از : منصوری ف ، باعزت م ر
اطلاعات فایل : زبان فارسی / 17 صفحه / حجم : KB 395711
نقد و بررسیها
هنوز بررسیای ثبت نشده است.