توضیحات
چکیده
با توجه به تفاوتهاي موجود در سيم بندي و ساختار شيار ژنراتورهاي سنكرون ولتاژ بالاي كابلي نسبت به ژنراتورهاي سنكرون امروزي نحوه سيم بندي اين ژنراتورهاي جديد مورد بررسي قرار گرفته و با در نظر گرفتن شيوه سيم بندي سنتي، شيوه سيم بندي جديدي جهت ژنراتورهاي ولتاژ بالايي كه درون شيارهايشان از كابل هاي متفاوتي استفاده مي كنند ارائه شده است. سپس با در نظر گرفتن شيوه سيم بندي ارائه شده، روشي جهت محاسبه راكتانس نشتي شيار با استفاده از روش اجزاء محدود (FEM) ارائه شده است. سرانجام روشهاي ارائه شده براي يك ژنراتور ولتاژ بالاي كابلي نمونه به كار برده شده و نتايج شبيه سازي الكترومغناطيسي ماشين توسط روش اجزاء محدود، شيوه سيم بندي انجام شده را تأييد ميكند. همچنين مقايسه مقدار راكتانس نشتي شيار بدست آمده از دو روش روابط تحليلي و روش ارائه شده در اين مقاله صحت تحليل انجام شده را نشان مي دهد.
مقدمه
امروزه در همه نيروگاه هاي جهـان از ژنراتورهـاي سـنكرون متناوب سه فاز جهت توليد الكتريسيته استفاده مـي شـود. ايـن ژنراتورهاي سنكرون بدليل نحوه سيم بندي و مشكلات عايقي بـه لحاظ ولتاژ خروجي محدود بوده و تقريباً مي توان گفت امروزه به صورت عملي ولتاژ خروجي همه ژنراتورهاي نيروگاهي بـه مقـدار ماگزيمم 30كيلوولت محدود شده است. لذا در نيروگاه هـا بـراي اتصال ژنراتور به خط انتقال از يك ترانسفورماتور افزاينـده جهـت رساندن ولتاژ خروجي ژنراتور به ولتاژ شـبكه اسـتفاده مـيشـود. براي اولين بار در سال 1998ژنراتور جديدي موسوم به پاورفرمر با قابليت توليد ولتاژي در حد ولتاژ انتقال بـا سـاختاري متفـاوت اختراع گرديد و بدين ترتيب امكان حذف ترانسفورماتور افزاينـده نيروگاه فراهم شد. يكي از مهمترين تفاوتهاي ژنراتور ولتاژ بالاي معرفـي شـده، سيم بندي اين ماشين جديد و در نتيجه ساختار متفاوت استاتور آن مي باشد. اين ژنراتور با استفاده از كابل هاي فشار قويXLPE بــه جــاي كلافهــاي مســي مســتطيلي در ســيم بندي آرميچــر محدوديت هاي عايقي موجود در ژنراتورهاي سـنكرون امـروزه را برطرف نموده و امكان بالا بردن ولتاژ خروجي ژنراتـور را تـا حـد ولتاژ انتقال فراهم نمود.
ABSTRACT
Due to the differences in cabling and cabling structure of cable high voltage synchronous generators compared to synchronous generators, the method of wiring these new generators has been investigated and considering the traditional wiring method, a new cabling method for high voltage generators inside their grooves They use different cables. Then, considering the wire drawing method, a method for calculating the leakage reactance of the groove is presented using finite element method (FEM). Finally, the methods proposed for a high-voltage cable generator of the sample were used and the results of the electromagnetic simulation of the machine by the finite element method confirmed the wiring method. Also, the comparison of the amount of leakage leakage reactance obtained from the two methods of analytical relations and the method presented in this paper shows the validity of the analysis.
INTRODUCTION
Today, three-phase alternating synchronous generators are used to generate electricity in all power plants in the world. These synchronous generators are limited due to the wiring and insulation problems in terms of output voltage. It is almost possible to say that today the output voltage of all power generators is limited to a maximum of 30 kV. Therefore, in the power plants, an augmented transformer is used to connect the generator to the transmission line to supply the generator’s voltage to the network voltage. For the first time in 1998, a new generator called PowerFrame, which was able to produce voltage at a different voltage transmission voltage, was invented and thus the possibility of removing the power transformer was provided. One of the most important differences between the high voltage generator introduced is the wiring of this new machine and, consequently, its stator structure. This generator by using high-pressure XLPE cables instead of rectangular copper coils in armature wiring eliminates the insulation constraints present in synchronous generators today and provides the possibility of increasing the output voltage of the generator to a transmission voltage.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Mahdi Taherzadeh, Mohammad Ardebili, Asghar Akbari
File Information: Persian Language/ 6 Page / size: 701 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : مهدي طاهرزاده , محمد اردبیلی , اصغر اکبری
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 701
نقد و بررسیها
هنوز بررسیای ثبت نشده است.