توضیحات
چکیده
ساخت قطعات در ابعاد نانومتري از اهمیت ویژه اي در نانو فناوري برخوردار است که نیازمند طراحی دقیق می باشد. بدین منظور طراحی با استفاده از نرم افزارهایی انجام می شود که بتواند قطعات را باتوجه به ابعاد نانویی شبیه سازي کند. در این مقاله ، رابط گرافیکی (GUI) متشکل از مولکول هاي بنزن و طلا بررسی می شود که در ترانزیستورهاي سرعت بالاي گرافنی کاربرد دارد .سپس این قطعه ي نانوسایز با نرم افزار ATKو روش DFTشبیه سازي می شود. سپس نمودار I-Vحاصل از شبیه سازي رسم شده و نتایج بیان میشود.
مقدمه
رابط گرافیکی یک رابط کاربري است که به کاربران اجازه تعامل با دستگاه هاي الکترونیکی از طریق آیکون هاي گرافیکی می دهد. این رابطها در ترانزیستورهاي سرعت بالاي گرافنی استفاده می شوند . در این مقاله، رابط گرافیکی (GUI) متشکل از یک مولکول بنزن که با دوخوشه از اتم هاي طلا احاطه شده (gold-benzene-gold device) ، طراحی می شود. با استفاده از نرم افزار ATKابتدا مولکول بنزن را براي قسمت مرکزي انتخاب می کنیم که متعلق به خانواده هیدروکربن هاست . هر مولکول بنزن 6اتم کربن و 6اتم هیدروژن دارد که یک آرایش حلقوي را به وجود میآورند . سپس خوشه طلا را طراحی میکنیم و به صورت آینه اي خوشه ي طلا را در قسمت دیگر نیز بازتاب می دهیم. تک اتمهاي خارج شده از خوشه طلا و متصل به آن را ، به دو اتم بنزن از طرفین وصل می کنیم. پس از شبیه سازي قطعه و در آوردن آن به شکل دیوایس وارد مراحل عملیاتی برنامه شده و از قسمت آنالیز و انتخاب نمودار جریان-ولتاژ وارد قسمت اجرایی یا همان runبرنامه شده و نمودار هایی از طریق روش تئوري چگالی – تابعی ( DFT) پس از اجرا شدن چند ساعته ي برنامه، بدست می آوریم.
ABSTRACT
Nano-dimensional components are of particular importance in nanotechnology that require precise design. For this purpose, the design is done using software that can simulate components in terms of nano dimensions. In this paper, a graphical interface (GUI) consisting of benzene and gold molecules is used which is used in high-speed graphene transistors. The nanosized piece is then simulated with the ATK software and the DFT method. Then I-V graphs are derived from the simulation and the results are expressed.
INTRODUCTION
The graphical interface is a user interface that allows users to interact with electronic devices through graphical icons. These interfaces are used in high-speed graphene transistors. In this paper, a Graphical Interface (GUI) consisting of a benzene molecule, designed with a two-cluster of gold-benzene-gold device. Using the ATK software, we first select the benzene molecule for the central portion that belongs to the hydrocarbon family. Each molecule of benzene has 6 carbon atoms and 6 hydrogen atoms, creating a ring arrangement. Then we design a golden cluster and mirror the gold cluster on the other side. We connect the single-atom extracted from the gold cluster to it, to the two atoms of benzene from each side. After simulating the piece and bringing it into the form of the device, it entered into the operational stages and from the analysis and selection of flow-voltage diagrams into the implementation part of the program run and graphs through the functional density functional theory (DFT) after implementation Getting the program a few hours.
Year: 2017
Publisher : International Conference on Basic Research in Electrical Engineering
By : Hossein Fargami, Mohammad Taghi Ahmadi
File Information: persian Language/ 3 Page / size: 393 KB
سال : 1396
ناشر : کنفرانس بین المللی تحقیقات بنیادین درمهندسی برق
کاری از : حسین فرجامی ، محمد تقی احمدي
اطلاعات فایل : زبان فارسی / 3 صفحه / حجم : KB 393
نقد و بررسیها
هنوز بررسیای ثبت نشده است.