توضیحات
چکیده
ريخته گري تحت فشار نوعي ريخته گري مي باشد كه مواد مذاب تحت فشار بداخل قالب تزريق مي شود . اين سيستم بر خلاف سيستم ريژه كه مذاب تحت نيروي وزن خود بداخل قالب مي رود امكانات توليد قطعات محكم وبدون مك مي باشد. دايكاست كوتاهترين راه توليد يك محصول از فلز مي باشد .
مزاياي ريخته گري تحت فشار:
1-توليد انبوه و با صرفه
2-توليد قطعه مرغوب باسطح مقطع نازك
3-توليد قطعات پيچيده
4-قطعات توليد شده در اين سيستم از پرداخت خوبي بر خوردار است.
5-قطعه توليد شده استحكام خوبي دارد.
6-در زمان كوتاه توليد زيادي را امكان مي دهد.
معايب ريخته گري تحت فشار :
1-هزينه بالا
2-وزن قطعات در اين سيستم محدويت دارد حداكثر 3 8 K g
3-از فلزاتي كه نقطه ذوب آنها در حدود آلياژ مس مي باشد مي توان استفاده نمود.
ماشين هاي دايكاست: اين ماشينها دو نوع كلي دارند:
1-ماشينهاي با محفظه تزريق سرد: cold chamber در اين نوع سيلندر تزريق خارج از مذاب بوده و فلزاتي مانند A L و C u و m g تزريق مي شود و مواد مذاب توسط دست به داخل سيلندر تزريق منتقل مي شود .
2-ماشينهاي با محفظه تزريق گرم : Hot chamber در اين نوع سيلند تزريق داخل مذاب و كوره بوده و فلزاتي مانند سرب خشك و روي تزريق مي شود و مذاب اتوماتيك تزريق مي شود.
ABSTRACT
Pressure casting is a type of casting where pressurized molten material is injected into the mold. This system, unlike the parachute system, which melted into the mold under its own weight, has the capability of producing solid parts without the mack. Dicast is the shortest way to make a metal product.
Benefits of casting under pressure:
1. Mass production and cost-effective
2. Production of high quality thin section
3. Production of complex parts
4. The parts produced in this system are well paid.
5. The manufactured piece has good strength.
6. It enables a lot of production in a short time.
Disadvantages of casting under pressure:
1. High cost
2. The weight of the components in this system is limited to a maximum of -3.8 K g3 of metals whose melting point is around the copper alloy.
Dykost Machines: These machines have two general types:
1. Cold injection chamber machines: Cold chamber in this type of cylinder is injected out of the melt and metals such as AL, C u and mg are injected and the material is transferred by hand into the injection cylinder. Gram: Hot chamber in this type of cylinder is injected into the melt and furnace and metals such as lead and zinc are injected and automatic melt is injected.
Year: ۲۰۱۶
Source : ۰
By : saman ghavami
File Information: persian Language/ 20 Page / size: 832 KB
سال : ۱۳۹۵
منبع : ۰
کاری از : سامان قوامی
اطلاعات فایل : زبان فارسی / 20 صفحه / حجم : KB 832
نقد و بررسیها
هنوز بررسیای ثبت نشده است.