توضیحات
چکیده
تحولات ميكروساختاري و تغيير مقادير سختي ضمن آنيل در سـطح يـك ورق نـورد سـرد آليـاژ منيـزيم AZ61مورد بررسي قرار گرفته است. به اين منظور بعد از انجام نورد سرد با كاهش كلي %24طـي چنـد پاس، آنيل در دو دماي 380و 450°Cدر زمان هاي 30دقيقه، 1و2 ساعت صورت گرفت. نتـايج نشـان ميدهند كه افزايش دما و زمان آنيل باعث كاهش سختي سطح ميشود. بررسي هاي ميكروساختاري نيـز نشان دهندة آن اسـت كـه در اثـر ايـن عوامـل تبلورمجـدد اسـتاتيكي و رشـد دانـه هـا رخ داده و از ميـزان دوقلويي هاي نيز كاسته ميشود.
مقدمه
امروزه در راستاي كاهش وزن وسايل نقليه به ، منظور كاهش مصـرف سـوخت و كـاهش توليـد گازهـاي مضر ناشي از آن،تلاش های زيادي در جهت جايگزيني قطعات داخلي با فلزات سبكتر انجـام مـيشـود. در اين ميان به علت چگالي كم آلياژهاي منيزيم (حدود 74/1گرم بر سانتيمتر مكعـب) و اسـتحكام ويـژة بالاي آنها،تمايل به استفاده از اين آلياژها به طور روز افـزون در حـال افـزايش اسـت. از طرفـي دارا بودن سـاختار hcpو محـدود بـودن تغييـر فـرم بـه لغـزش روي صـفحات قاعـده در دمـاي اتـاق، كمبـودهای سيستم لغزش و توزيع نامتقارن آنها و همچنـين انيزوتروپـي بـالاي فلـزات hcpباعـث مـيشـود كـه مكانيزم دوقلويي در تغيير فرم اين فلزات فعال شود(خصوصاً در دماهاي زيـر (225°C) مطالعـات انجــــام شــــده توســــط Barnettو همكــــارانش نيـز روي بافــــت كريســــتالي(texture) و ميكروساختار (microstructure) تعدادي از آلياژهاي منيزيم بعد از نورد سـرد نشـاندهنـدة آن اسـت كـه باندهاي برشي به همراه دوقلويي هاي 10{ 1 }2و دوقلويي هاي دوگانة 10{ 1 }1 − 10{ 1 }2نقشي اساسـي در تغيير فرم سرد اين آلياژها بازي ميكنند. مشخص شده است كه دوقلويي ها در تحولات ساختاري حين آنيل نيز نقش دارند، به طوريكه حين آنيل تبلورمجدد استاتيكي (Static Recrystallization) روي تيغة اين دوقلويي ها (كه مناطق پرانرژي هسـتند). راحتتر از ساير مناطق انجام شده و دانه هاي حاصل زودتر جوانه زده و سريعتر رشد ميكنند. مطالعات انجام شده توسـط Pérez-Pradoو Ruanoروي يـك ورق اكسـترود شـدة AZ61بعـد از آنيل نشان دهندة آن است كه حين آنيل كنترل شـده (بـا دمـا و زمـان زيـاد)، رشـد نرمـال در دانـه هـاي بـا صفحات قاعده اي {0001} موازي با صفحه ورق رخ ميدهد.
ABSTRACT
The microstructural changes and the hardness variation along the annealing surface of a cold rolling sheet of AZ61 magnesium alloy have been investigated. For this purpose, after cold rolling with a total reduction of 24% in a few passes, anil was carried out at 380 ° C and 450 ° C at 30 minutes, 1 and 2 hours. The results show that increasing the temperature and time of the annealing reduces the hardness of the surface. Microscopic studies also show that the static crystallization and grain growth have occurred due to these factors, and the number of twins also decreases.
INTRODUCTION
Today, in order to reduce the weight of vehicles, in order to reduce fuel consumption and reduce the production of harmful gases caused by it, many efforts are being made to replace internal parts with lighter metals. Due to the low density of magnesium alloys (about 1.74 grams per cubic centimeter) and their high strength properties, the tendency to use these alloys is increasing. On the other hand, having the structure of hcp and the limited variation of the form to slip on the base plates at room temperature, the slip system defects and their asymmetric distribution, as well as the high anisotropy of hcp metals, enable the twin mechanism to be activated in the form of these metals (especially at the following temperatures (225 ° C) Studies by Barnett et al. On texture and microstructure of a number of magnesium alloys after cold rolled shows that shear bands along with twins 10 {1} 2 and twin twins 10 {1 } 1 – 10 {1} 2 The fundamental role of change The cold forms of these alloys play. It has been found that twins also play a role in structural changes during annealing, so that during the annealing, static recrystallization occurs on the blade of these twins (which are high energy regions). It is easier than other areas. And the resulting seeds grow faster and faster. Studies by Pérez-Prado and Ruano on an extruded AZ61 sheet after annealing show that during controlled anil (with high temperature and time), normal growth in seeds With the front pages {0001} appears parallel to the plate page.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Arash Baladi, Farbod Farbod, Mohsen Talebi Anaraki, Abbas Akbarzadeh
File Information: persian Language/ 11 Page / size: 836 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : آرش بلدي ، بهدخت فربد ، محسن طالبي اناركي ، عباس اكبرزاده
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 836
نقد و بررسیها
هنوز بررسیای ثبت نشده است.