توضیحات
چکیده
مشخصات اوليه پودر شامل شكل و نحوه توزيع ذرات در قابليت تراكم پذيري پودر و دستيابي به خـواص بهينه در قطعه نهايي بسيار موثر ميباشد. گرانوله نمودن مخلوط پودري بعد از آسياب يكي از مراحل موثر در حصول نتايج مذكور است. در اين تحقيق به منظور بررسي تاثير مشخصات پودر و تركيب بر دانسيته خـام هاردمتـالهـاي ،WC-xCo تركيبات مختلف در شرايط گوناگون تهيه گرديد. نتايج نشان ميدهـد كـه فرآينـد گرانولـه سـازي ذرات باعث افت قابليت فشرده سازي قطعات ميشود. از طرفي افزودن كمك آسياب، بخصوص پارافين، قابليت تراكمپذيري حين پرس را افزايش ميدهد؛ اما خواص نهايي را دچار افت مينمايد.
مقدمه
امروزه هاردمتال هاي پايه کاربيدتنگستن بدليل سختي بالا، مقاومت به سايش و اسـتحكام در دمـاي بـالاي مناسب به طور گسترده در ابزارهاي برشي استفاده ميشوند. هاردمتال هاي پايه كاربيدتنگستن عمدتاً با فاز كبالت توليد ميگردند. كبالت، فلزي گران، كمياب و با منابع محدود اسـت. بـا ايـن وجـود، تـلاشهـاي صورت گرفته براي جايگزيني يك بايندر ديگر، در مقياس صنعتي موفقيت آميز نبوده است. در هاردمتال ها، علاوه بر كبالت، براي جلوگيري از رشد دانه ها از مواد كاربيدي ديرگداز به ميزان اندكي استفاده ميشود. مشخص شده است كه اثربخشي اين كاربيدهاي نسوز در جلـوگيري از رشـد دانـه هـا بـه پايداري ترموديناميكي آنها برميگردد. لازم به ذكر است كـه بـراي افـزودن ايـن بازدارنـده هـا ميـزان معيني وجود دارد كه افزودن بيش از ايـن مقـدار، اثـري بـر رشـد دانـه هـا نـدارد. ايـن ميـزان بـه حـداكثر حل پذيري فاز كاربيد در مذاب كبالت وابسته است. فاز مذابي كه از كاربيدهاي ممانعت كننده اشباع شده است، حل پذيري WCرا كاهش داده و لذا نرخ رشد نيز كاهش مييابد. در سالهاي اخير اسـتفاده از تركيب اين مواد, براي كاهش اثرات غيرمفيد آنها در قطعات هاردمتال مورد توجه قرار گرفته است. براي نمونه يكي از اين موارد, تركيـب هـاي TaC/VCو Cr2C3/VCمـيباشـد كـه Chaو همكـارانش در بررسي بر روي اين تركيبات, به اين نتيجه رسيدند كه افزودن مخلـوط TaC/VCنـسبت بـه ,Cr2C3/VC تاثير بيشتري در جلوگيري از رشد دانه WCدارد. در مرحله آماده سازي، پودر كاربيدتنگستن و ساير افزودني هاي ازم در آسياب هاي مناسب و عموماً در مجاورت يك مايع آلي همچون الكل، بنزن، هپتان و يا استن انجام ميشود، تا هم از گرم شدن پودر و هم از اكسيد شدن آن جلوگيري شود.
ABSTRACT
The initial characteristics of the powder include the shape and pattern of the particle distribution in the powder compressibility and achievement of optimal properties in the final piece. Granulating a powder mixture after milling is one of the effective steps in achieving the results. In this study, in order to investigate the effect of powder and compound characteristics on hard metal hardness, WC-xCo, different compositions were prepared in different conditions. The results show that the particle granulation process reduces the compression capability of the components. On the other hand, the addition of milling aid, especially paraffin, increases the compressibility during press, but decreases its final properties.
INTRODUCTION
Carbide tungsten hardmetals are mainly produced by the cobalt phase. Cobalt is an expensive metal, rare and limited resource. However, efforts to replace one other binder have not been successful at the industrial scale. In Hardmtal, in addition to cobalt, to prevent grain growth of the refractory carbide material is of little use. It should be noted that in order to add these inhibitors there is a certain amount that adding more than this amount does not have any effect on the growth of the seeds. This amount depends on the maximum solubility of the carbide phase in the cobalt melt. In recent years, the use of the combination of these materials has been considered to reduce their unfavorable effects in hardmetal parts. One example is the TaC / VC and Cr2C3 / VC compounds that Cha et al. Asserted to study on these compounds. It was concluded that the addition of TaC / VC to Cr2C3 / VC was more effective in preventing WC growth. In the preparation stage, carbide tungsten powder and other additives are used in appropriate mills and generally in the vicinity of an organic liquid such as alcohol, benzene, heptane or acetone, to prevent both the heating of the powder and its oxidation.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Maryam Waliie, Hamed Ali Akbarzadeh
File Information: persian Language/ 11 Page / size: 381 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مريم وليعي، حامد علي اكبرزاده
اطلاعات فایل : زبان فارسی / 11صفحه / حجم : KB 381
نقد و بررسیها
هنوز بررسیای ثبت نشده است.