توضیحات
چکیده
هدف از ايـن تحقيـق، توليـد آلياژهـاي نـانو كريسـتال آهـن – كبالـت قابـل اسـتفاده در كامپوزيـت هـاي مغناطيسي نرم ميباشد .در اين مقاله تاثير ارامترهايي از قبيل تركيب شيميايي و زمان آسياب بـر محصـول نهايي بررسي گرديده است. اندازه كريستالها و فازهاي تشكيل شده توسط زمايشات آناليز اشـعة ايكـس (XRD) شناسايي شدند و ريز ساختار نمونـه هـا نيـز بـه كمـك تصـاوير ميكروسـكوپ الكترونـي (SEM) بررسي شدند. كيفيت مغناطيسي پودرهاي توليدي توسط دستگاه آنـاليزر مغناطيسـي (منحنـي B-H)مـورد ارزيابي قرار گرفت. نتايج آناليز تفرق اشعة ايكس تشكيل محلول جامد آهن (نيكل) را بعـد از 45سـاعت آسياب تأييد ميكنند. افزايش زمان آسياب منجر بـه افـزايش پـارامتر شـبكه، كـاهش انـدازه دانـه (انـدازه كريستال) و افزايش كرنش شبكه ميشود. نتايج آزمايشات مغناطيسي نشان ميدهـد كـه بـا افـزايش زمـان آسياب نيروی مغناطيس زدا افزايش يافته و مغناطش اشباع در ابتدا زياد و بعد از 70سـاعت آسـياب كمـي كاهش مييابد.
مقدمه
مواد نانو كريستال به صورت تك فازي و يا چند فازي هسـتند كـه انـدازه دانـه آنهـا كمتـر از 100نـانومتر ميباشد. اين مواد شامل تعداد زيادي از اتم ها هستند كه در مرز دانه ها قرار گرفتـه انـد. در نتيجـه ايـن مـواد در مقايسـه بـا مـواد معمـولي بـا انـدازه دانـه در حـد ميكرومتـر، تركيبـي از خـواص مكـانيكي، فيزيكـي و مغناطيسي متفاوتي از خود نشان ميدهند. پودرهاي آلياژي پايه آهني يكي از اجزاء اصلي كامپوزيت هاي مغناطيسي رم ميباشند. اين مواد بـه دليـل ساختار مغناطيسي ايزوتروپ و تلفـات مغناطيسـي كـم در فركـانس هـاي بـالا، جايگـاه خاصـي در صـنايع مختلف از جمله الكترونيك و مخابرات يافته اند. اين كامپوزيتها براي ايجاد موادي با خـواص مغناطيسـي مناسب (نفوذپذيري مناسب و اشباع غناطيسي بالا) و نيروي مغناطيسزداي كم توسعه يافته انـد. آلياژهـاي آهن – كبالت از مهمترين مواد مغناطيسي نرم ميباشند،كه به طور گسترده اي در صنايع استفاده مـيشـوند. اين آلياژها مغناطش اشباع و دماي كوري بالا دارند، به طوري كه آنها را براي كار در دماهاي بالا مناسـب ميسازد. آلياژسازي مكانيكي يكي از روشهاي مؤثر براي توليد پودرهاي آليـاژي نـانو كريسـتال بـه عنـوان جـزء اصـلي كامپوزيـتهـاي مغناطيسـي نـرم مـيباشـد. مزيـت توليـد پودرهـاي آليـاژي نانوكريسـتال بـا روش ژآليا سازي مكانيكي در اين است كه مقـدار زيـادي از مـاده را مـيتـوان در حالـت جامـد و بـا اسـتفاده از وسايل ساده و در دماي محيط به صورت نانوكريستال توليد كرد.
ABSTRACT
The purpose of this research is to produce iron-cobalt nanocrystals used in soft magnetic composites. In this paper, the effect of the elements such as chemical composition and milling time on the final product has been investigated. The size of crystals and phases formed by x-ray analysis (XRD) was determined and the microstructure of the samples was also investigated using electron microscopy (SEM) images. The magnetic properties of the produced powders were evaluated by a magnetic analyzer (B-H curve). The X-ray diffraction results confirm the formation of a solid iron (nickel) solution after 45 hours of milling. Increasing the milling time leads to increasing the network parameter, reducing the grain size (crystal size) and increasing the strain of the grid. The results of magnetic tests show that with increasing milling time, the magnetoelastic force is increased and the saturation magnetization is initially high and after 70 hours the milling is reduced.
INTRODUCTION
Nanocrystal materials are monophasic or multiphase with a grain size of less than 100 nm. These materials include a large number of atoms located at the boundary of the grains. As a result, these materials exhibit a combination of mechanical, physical and magnetic properties in comparison with ordinary materials with a grain size of micrometer. Iron base alloy powders are one of the main components of the Rome magnetic composite. Due to the magnetic isotropic structure and low magnetic losses at high frequencies, these materials have a special place in various industries, including electronics and telecommunications. These composites have been developed to produce materials with good magnetic properties (good permeability and high gravity saturation) and low magnetization. Iron-cobalt alloys are one of the most important soft magnetic materials, which are widely used in industries. These alloys have high saturation magnetism and high temperature, making them suitable for work at high temperatures. Mechanical alloying is one of the effective methods for producing nano-crystalline alloy powders as the main component of soft magnetic composites. The advantage of producing nanocrystalline alloy powders by mechanical gylasation is that a large amount of matter can be produced in solid form using nanocrystalline nanoparticles using simple means and at ambient temperature.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Razieh Kohkan, Shahriar Sharafi, Human Shakrollahi, Kamal Jangkranban
File Information: persian Language/ 10 Page / size: 364 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : راضيه كوهكن ،شهريار شرفي ،هومان شكراللهي ،كمال جانقربان
اطلاعات فایل : زبان فارسی / 10صفحه / حجم : KB 364
نقد و بررسیها
هنوز بررسیای ثبت نشده است.