توضیحات
چکیده
با توجه به ماهيت پديده ي انفجار، مشخص كردن مكان وقوع قطعي آن غيرقابل پيش بيني است. تحليل دقيق پديده ي انفجار نيازمند دانش كافي پيرامون روابط حاكم بر رفتار سيالات تراكم پذير است و از آن جهت كه معمولا استفاده از اين نرم افزارهاي تحليل انفجاري نياز به اطلاعات مبسوطي دارد، مناسب براي استفاده مهندسين و تحليل گران سازه نمي باشد. اگر بار انفجاري به يك سازه نامتقارن وارد شود مسئله پيجيده تر خواهد بود. هدف از اين پژوهش توسعه نرم افزاري است كه بتواند با استفاده از داده هاي تجربي و روابط تحليلي موجود، تاريخچه بارگذاري بر سطوح مايل نسبت به موج انفجار را به دست دهد. در اين مقاله يك سازه نامتقارن كه تحت اثر بار ناشي از انفجار قرار گرفته است به روش غير خطي ديناميكي تحليل ميگردد. بدين منظور با كد نويسي در نرم افزار OPENSEESبارگذاري انفجار در آن وارد گرديد، سپس با تهيه و توسعه برنامه SAMBlastامكان محاسبه پروفايل بارگذاري انفجاري بر سطوح مايل فراهم شد. در بخش پاياني اين مقاله نيز نتايج تحليل با نتايج آزمايش مقايسه ميگردد.
مقدمه
بيش از چند دهه از ورود ابزارهاي محاسباتي مبتني بر روش اجزاء محدود در تحليل و طراحي سازه ها مي گذرد اما هنوز نبود ابزاري مناسب در اين زمينه كه توانايي تحليل دقيق سازه در برابر بارهاي انفجاري را داشته باشد احساس مي شود. امروزه با گسترش عمليات تروريستي در سراسر جهان نياز به طراحي سازه هاي مقاوم در برابر اين پديده اجتناب ناپذير است. همچنين در روش هاي نوين طراحي براي تخمين بهتر ظرفيت سازه در برابر بار هاي وارد بر آن، نيازمند به تحليل هاي دقيق تر خواهد بود. در اين مقاله ابتدا به معرفي پارامترهاي انفجار مي پردازيم. در ادامه قدرت مواد منفجره و ضريب معادل TNTمعرفي و سپس قوانين مقياس به صورت مختصر مورد مطالعه قرار خواهد گرفت. در بخش بعد روشهاي محاسبه پارامترهاي بارهاي انفجاري ارائه مي شود. سپس مقدار فشار موج بازتاب و رابطه آن با زاويه برخورد با سطح بررسي خواهد شد. آنگاه پروفايل هاي اضافه فشار براي حالت هاي مختلف برخورد موج انفجار با سطح ارائه مي شود و در انتها ابزارهاي محاسباتي موجود و نرم افزار SAMBlastمعرفي مي گردد و نتايج حاصل راستي آزمايي مي شود.
ABSTRACT
Given the nature of the explosion phenomenon, it is unpredictable to determine its exact occurrence. The exact analysis of the explosion phenomenon requires adequate knowledge about the relationships governing the behavior of compressible fluids, and since the use of these explosive analysis software usually requires extensive information, it is not suitable for use by engineers and structural analysts. If an explosive load is introduced into an asymmetric structure, the problem will be more coherent. The purpose of this research is to develop software that can use the empirical data and existing analytical relationships to track the history of loading on the levels of the beam toward the explosion wave. In this paper, an asymmetric structure under the influence of load caused by the explosion is analyzed by nonlinear dynamic method. For this purpose, an explosion was loaded with coding in OPENSEES software. Then, with the preparation of the SAMBlast program, it was possible to calculate the explosive loading profile at the desired levels. In the final section of this paper, the results of the analysis are compared with the results of the experiment.
INTRODUCTION
For decades, computing tools based on the finite element method have undergone structural analysis and design, but there is still a lack of proper tools in this area that can accurately analyze structures against explosive loads. Today, with the spread of terrorist operations around the world, the need to design structures resistant to this phenomenon is inevitable. Also, in new design methods, in order to better estimate the structure’s capacity against the loads it entails, more detailed analyzes are required. In this article we first introduce the explosion parameters. Further, the power of explosives and the equivalent coefficient of TNT are introduced, and then the rules of the scale will be studied briefly. In the next section, methods for calculating the parameters of explosive loads are presented. Then, the amount of reflection wave pressure and its relationship with the angle of contact with the surface will be examined. Then overpressure profiles are provided for different modes of surface-to-surface explosion. At the end, existing computing tools and software SAMBlast are introduced and the results are verified.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Ahmad Shoshtari, Mostafa Salehi Abad
File Information: persian Language/ 8 Page / size: 401 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : احمدشوشتري ، مصطفي صالحي آباد
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 401
نقد و بررسیها
هنوز بررسیای ثبت نشده است.