توضیحات
چکیده
امروزه استفاده همزمان از نانوپودر TiO2/SiO2جهت پوشش يده شيشه هاي خودتميزکننده مرسوم مي باشد. بدین منظور در اين تحقيق سعي در توليد همزمان نانوپودر مذکور با استفاده از روش سل- ژل شده است. جهت این کار آلکوکسيدهاي فلزي تترااتيل اورتوسیلیکات (TEOS) وتترابوتیل اورتوتيتانات (TBOT)به عنوان مواد اوليه اصلي در تهيه همزمان ژل سيليکا و تيتانيا انتخاب شد. نتایج آزمايشات بيانگر وابستگي شديد زمان تشکيل ژل به مقدار ، pHنسبت ، TBOT/TEOSو نحوه افزودن مواد اوليه به یکدیگر ميباشد. نتایج نشان ميدهد که افزایش نسبت مذکور باعث کاهش زمان تشکيل ژل ميشود. همچنين مشخص گرديد که در رنج تقريبي pH=4زمان تشکيل ژل افزايش ميیابد. از جمله نتايج جالب در اين تحقيق وابستگي شفافيت ژل تشکيل شده به pHو نحوه افزودن مواد اولیه میباشد.
مقدمه
دو نمونه از نانوذرات اکسیدي پرکاربرد در نانوتکنولوژي ، نانوذرات تیتانیا (TiO2) و سیلیکا (SiO2) هستند. خاصيت فوتوکاتاليستي و آبدوستي نانوذرات تيتانيا باعث کاربردهاي فراوان اين ماده در زمینه های مختلف از جمله پاکسازي هوا و محیط های آلوده، تصفيه آب وتجزيه باکتري، فعاليت هاي ضد تومور، کرمهای ضد آفتاب و … شده است. از طرف ديگر به دليل خاصيت آبدوستي سلیکا، استفاده همزمان از این نانوذرات در کنار تیتانیا علاوه بر اينکه باعث بهبود خواص فوتوکاتاليستي و آبدوستي تیتانیا ميشود، خاصيت خودتميزکنندگي را بروز ميدهند. مهمترین کاربرد اين خاصيت در توليد شيشه های خودتميزکننده در اتومبيل ا ساختمان، توليد پارچه های خودتميزکننده و جلوگیری از لک شدن آنها و بطور کلي مکانهايي که نياز به پوشش خودتميزکننده دارند از جمله سرويس هاي بهداشتي، نماي خارجي ساختمانها و … میباشد. فرآيند سل- ژل براي توليد پودر اکسيد فلزات و سراميک ها با درجه خلوص و همگني بالا براي سالهاي زيادي استفاده ميشده است. در اين فرايند امکان کنترل ترکيب و ساختار در سطح مولکولي وجود دارد ابلمن اولين ژلهاي سيليکا را در سال 1846توليد کرد و کوسا در سال 1870ژلهاي آلومينا را توليد نمود. بعد از آن با استفاده از تکنيک سل– ژل آئروژل هاي زيرکونيا، بورات و ديگر سراميک ها توليد شد. سل ها ذرات كلوئيدي پراكنده در محلول به ابعاد 1-100nm هس با، تند و ژل نيز عبارتست از يك شبكه جامد و به هم پيوسته منافذي به ابعاد زير ميكرومتر و زنجيرهاي پليمري كه طول متوسط آنها بزرگتر از يك ميكرومتر است.
ABSTRACT
Today, the simultaneous use of TiO2 / SiO2 nanopowder is a common practice for self-repairing glasses. For this purpose, in this research, we tried to produce the mentioned nanopowder using the sol-gel method. For this purpose, metal tetraethyl ortho-silicate oxides (TEOS) and tetrabutyl orthotonate (TBOT) were selected as the main raw materials for the preparation of synthetic silica gel and titanium. The test results indicate a strong dependence of gel formation time, pH, TBOT / TEOS, and how to add raw materials to each other. The results show that increasing the ratio leads to a reduction in the time of formation of the gel. It was also found that in the approximate range of pH = 4, the formation time of the gel increased. One of the interesting results in this study is the dependence of the transparency of the gel formed on the pH and how to add the raw material.
INTRODUCTION
Two examples of nanoparticle oxide nanoparticles used in nanotechnology are Titania (TiO2) and silica (SiO2) nanoparticles. The photocatalytic and hydrophilic properties of Titanium nanoparticles have caused many uses of this material in various fields, including air and contaminated environments, water purification and bacterial culture, anti-tumor activity, sunscreens and so on. On the other hand, the use of these nanoparticles in conjunction with Titania, in addition to improving the photocatalytic and hydrophilic properties of Titania, results in self-healing properties due to the properties of silica. The most important use of this property is the production of self-winding glasses in a building car, production of self-cleaning fabrics and preventing their wearing out, and in general places requiring self-cleaning coatings, including sanitary services, external view of buildings, etc. The sol-gel process for the production of oxide powder and ceramics has been used for many years and has been used for high purity and homogeneity. Abelman produced the first Silica gels in 1846, and Cousa produced alumina gels in 1870, when it was possible to control the composition and structure at the molecular level. Subsequently, Zirconia, Borate, and other ceramics were produced using the Sel-Gel electrodegree technique. Cells The dispersed colloidal particles in a solution of 1-100nm Hess with a spiky and gel are also a solid and interconnected network with a sub-micrometer dimension and polymer chains whose average length is greater than one micrometer.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Heydar Khodavi – Nasrin Sassani – Sidmjtabi Zarbjerd – Sayed Abdolkarim Sajjadi – Ali Ahmadpour-Somayeh Kazemian
File Information: persian Language/ 10 Page / size: 140 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : حيدر خديوي – نسرين ساساني -سيدمجتبي زبرجد -سيدعبداکريم سجادي -علي احمدپور-سميه کاظميان
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 140
نقد و بررسیها
هنوز بررسیای ثبت نشده است.