توضیحات
چکیده
خاكستر برجامانده از احتراق سوخت سنگين (مـازوت)، حـاوي تركيبـات ارزشـمندي همچـون وانـاديوم است. استفاده وسيع از مازوت بعنوان سـوخت در نيروگـاه هـاي حرارتـي موجـب تـشكيل خاكـستر قابـل توجهي در داخل بويلر آنها ميگردد بنابراين با توجه به ارزش واناديوم و تركيبـات آن، خاكـستر مـازوت ميتواند به صورت يك منبع ثانويه مهم جهت استحصال واناديوم مورد استفاده قرار گيرد. توليد فروواناديوم مستلزم دو مرحله ميباشد. مرحله نخست استخراج واناديوم از منابع آن و مرحله ديگـر انجام فرآيند متالوترمي جهت احياء اكسيد واناديوم و در نهايت توليد فروواناديوم. دراين تحقيق روش پيرو- هيدرومتالورژي بـراي اسـتخراج وانـاديوم از خاكـستر مـازوت بـصورت پـودر پنتوكسيدواناديوم يا متاوانادات آمونيوم و روش آلومينوترمي بـراي توليـد فرووانـاديوم انتخـاب و و عوامـل مؤثر بر آن بررسي و مطالعه گرديد و شرايط بهينه هركدام از اين فرآيندها تعيين شد.
مقدمه
سوخت سنگين یا مازوت حاوي ناخالصي هاي فلزي و غير فلزي از جمله ترکيبات واناديوم است كه پـس از احتراق سوخت، واناديوم اکسيد شده و ر ترکيب خاکستر قرار مـيـگيرد .بدلیل اسـتفاده وسـیع نیروگاه های حرارتي از مازوت میزان قابل توجهي خاکستر از اين طريق حاصل ميگردد. به عنوان مثـال در واحد 320مگاواتي نيروگاه اسلام آباد اصفهان میزان مصرف مـازوت 68تـن در سـاعت يـا روزانـه 1800تن مي باشد. مهمترين کاربرد فلز واناديوم در صنعت فولاد است که به صورت فروواناديوم بـه منظور ايجاد ريزدانگي و افزايش سختي و مقاومت به يسا ش اضافه ميشود بـراي جلـوگیری از آلـودگي محیط زیست با ترکيبات واناديوم و بـا توجـه بـه ارزش صـنعتي فلـز وانـاديوم و امکـان استحـصال آن در واحدهاي عملياتي نسبتاً کوچک، انجام پروژه هاي تحقیقاتي و صنعتي در خصوص استخراج وانـاديوم از اینگونه پسماندها حائز اهميت ميباشد. آزمـايشهـاي تهيـه پـودراکـسید وانـاديوم را مـي تـوان بـه دو گـروه کلـي هيـدرومتالورژي و پيـرو هيدرومتالورژي تقسیم بندي کرد. روش هيدرومتالورژي شامل دوگـروه اسـيدي و بـازي مـيباشـد. در انحـلال اسـيدي، خاكـستر در اسيدهاي H2SO4, HNO3, HClحل ميگردد. حداكثر %30واناديوم موجود در مواد اوليه در اسـيد 2 نرمال در دماي محيط قابل حل است كـه در دماهـاي بـالاتر(حـدود 80°c) ميـزان بازيـابي وانـاديوم تـا %86/8ميرسد. انحلال اسيدي بواسطه واكنش محلول اسيد سولفوريك با اجزاء خاكستر و درصـد بالاي ناخالصيها در رسوبات حاصله و نيز خوردگي ظروف و بخارهاي نامـساعد و از همـه مهمتـر پـايين بودن راندمان بازيافت واناديوم از خاكستر سوخت، جهت استخراج واناديوم مناسب نميباشد.
ABSTRACT
The ash of combustion of heavy fuel (mazut) contains valuable compounds such as vanadium. The extensive use of mazut as a fuel in thermal power plants generates a significant amount of ash in the boiler. Therefore, considering the value of vanadium and its compounds, ash mazut can be used as an important secondary source for the extraction of vanadium. The production of Ferrovanadium requires two steps. The first phase of the extraction of vanadium from its sources and the second stage of the metallothermic process for the reduction of vanadium oxide and, finally, the production of Ferrovanadium. In this research, the pyrohydrometallurgy method was selected for the extraction of vanadium from ash ash in powdered pentoxydonadium or ammonium methane, and aluminothermic method for the production of ferrovanadium, and the factors affecting it were studied and the optimal conditions for each of these processes were determined.
INTRODUCTION
The heavy fuel oil or mazut containing metallic and non-metallic impurities is one of the vanadium compounds that after combustion of fuel, oxidized vanadium, and ash composition. Due to the extensive use of thermal power plants, a significant amount of ash is produced from the mazut. For example, in the 320-megawatt unit of the Islabad Power Plant in Isfahan, the consumption of Mazut is 68 tons per hour or 1800 tons per day. The most important application of vanadium metal in the steel industry is added in the form of fin nanodium in order to create fineness and increase the hardness and resistance to iodine. To prevent environmental contamination with vanadium compounds and considering the industrial value of vanadium metal and its possible extraction in operational units Relatively small, carrying out research and industrial projects on the extraction of vanadium from such wastes is important. Vanadium Powder oxidation tests can be divided into two groups: General Hydrometallurgy and Pyrohydrometallurgy. Hydrometallurgy method consists of two groups of acid and play. In the dissolution of acid, ash is dissolved in H2SO4, HNO3, and HCl acids. A maximum of 30% of vanadium in the raw material can be soluble in 2 normal acids at ambient temperature. At higher temperatures (about 80 ° C), the recovery rate of vanadium is up to 8.86%. Acid dissolution is not suitable for the extraction of vanadium, due to the reaction of sulfuric acid solution with ash components and the high percentage of impurities in the resulting sediments, as well as the corrosion of disadvantaged containers and vapors, and most importantly the low efficiency of vanadium recovery from fuel ash.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Majid Pourabdollah , Mohammad Sheikh Shab Bafghi , Mohammad Reza Abotalebi
File Information: persian Language/ 10 Page / size: 120 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مجيد پورعبداالله ، محمد شيخ شاب بافقي ، محمدرضا ابوطالبي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 120
نقد و بررسیها
هنوز بررسیای ثبت نشده است.