توضیحات
چکیده
در اين تحقيق خوردگي آلومينيوم در اسيد كلريدريك (1M) و تاثير ممانعت كنندگي يك ماده سـنتزي جديد براي جلوگيري از خوردگي آن به روشهاي الكترو شيميائي پلاريزاسيون و AC امپدانس و همچنين روش كاهش وزن مورد مطالعه قرار گرفت . پارامترهـاي بدسـت آمـده از آزمايـشات نـشان داد كـه ايـن ممانعت كننده به صورت كاتدي و آندي عمل نمـوده و افـزايش غلظـت ممانعـت كننـده باعـث افـزايش حفاظت مي شود. غلظت بهينه ممانعت كننده تعيين و آناليز سطح نمونه ها بعد از پلاريزاسـيون بـا SEM انجام شد و همچنين مشخص گرديد كه جذب ممانعت كننده بر روي سطح آلومينيوم از ايزو ترم لانگمير پیروی میکند.
مقدمه
ويژگيها و خصوصيات آلومينيوم از جمله سبكي وزن ، استحكام بـالا ، مقاومـت بـه خـوردگي ، سـهولت شكل پذيري ، توانائي انجام پرداختها و قابليت بازيافت و همچنين قابليت هدايت گرمـايي و الكتريكـي و قيمت پايين آن باعث اهميت اقتصادي و صنعتي اين فلز گرديده و به دومين فلز پر مصرف در سطح جهان تبديل شده است . بررسي اثر ممانعت كننده ها بـر روي خـوردگي آلومينيـوم در محيطهـاي اسـيدي و بازي به دليل استفاده وسيع در بعضي محيطهاي خورنده اهميت دارد. تحقيقات زيادي بـرروي خـوردگي آلومينيوم در محيطهاي آبي انجام شده است. از آنجاكـه سـيد كلريـدريك اسـيدي اسـت كـه عموما” براي عمليات تميز سازي سطح (Pickling) و عمليات اچ كردن آلومينيوم كاربرد دارد و دليل اصلي استفاده از اين اسيد برداشتن لايه اكسيدي ناخواسته و محـصولات خـوردگي از سـطح مـي باشـد . براي جلوگيري از حمله اسيد به فلز اصلي استفاده از ممانعت كننده ها براي عمليـات فـوق داراي اهميـت مي باشد. تحقيقات زيادي در مورد استفاده از ممانعت كننده هاي آلي در محيط هاي اسيدي و بازي انجـام شده است. معمولا” بازدارنده هاي آلي از نوع جذبي هستند كه شامل نيتروژن ، اكسيژن و كوگرد مي باشـند و بـدليل وجود زوج الكترونها و باندهاي دوگانه در ايـن تركيبـات و جاهـاي خـالي الكترونـي در فلـزات انتقـال و تغييرات صورت گرفته و جذب سطح فلز مي شوند . در اين تحقيق يك ممانعت كننده سـنتزي جديـد از گروه شيف بازها بـر روي خـوردگي آلومينيـوم در اسـيد كلريـدريك امـلار ( 1M) بـه روش كاهش وزن و روشهاي الكتروشیميايي پلاريزاسيون و AC امپدانس بررسـي گرديـد و همچنـين بعـد از پلاريزاسيون، سطح نمونه ها با ميكرو سكوپ الكتروني به روش EDSآناليز و مطالعه شد.
ABSTRACT
In this research, the corrosion of aluminum in chloride acid (1M) and the effect of inhibiting a new synthetic material were investigated to prevent its corrosion by electrochemical polarization and AC impedance methods, as well as weight loss method. Parameters obtained from the experiments showed that this inhibitor acts as cathodic and anodic and increasing inhibitory concentration increases the protection. Optimum inhibitory concentrations were determined by analyzing the surface of the samples after polarization with SEM and it was also observed that the inhibitory absorption on the aluminum surface follows the Langmuir isotherm.
INTRODUCTION
The properties and characteristics of aluminum, including light weight, high strength, corrosion resistance, ease of formability, ability to perform payments and the ability to recycle, as well as the ability to conduct heat and electrical and its low cost, has led to the economic and industrial importance of the metal and the second metal filled Consumption has changed globally. Investigating the effect of inhibitors on aluminum corrosion in acidic environments and in play due to its extensive use in some corrosive environments. A lot of research has been done on aluminum corrosion in aqueous media. Because acid chloride is generally used for pickling and aluminum etching operations, the main reason for using this acid is to remove unwanted oxide layer and corrosion products from the surface. To prevent acid attack on metal The main use of inhibitors for the above operations is important. Many studies have been conducted on the use of organic inhibitors in acidic and in-situ environments. Typically, organic inhibitors are absorbent types that include nitrogen, oxygen, and sulfur And due to the existence of a pair of electrons and dual bands These compounds and free electrons are deposited in metals and the metal is absorbed. In this study, a new synthetic inhibitor of Schiff’s group was investigated on aluminum corrosion in chloride ammonium chloride (1M) by weight reduction method, electrochemical methods of polarization and AC impedance. Also, after polarization, the surface of the specimens with an electron microscope The EDS method was analyzed and studied.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Afraid Dadgari Nejad, Fatemeh Baqaeei
File Information: persian Language/ 8 Page / size: 114 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالوژی ايران
کاری از : اطهره دادگري نژاد, فاطمه بقائي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 114
نقد و بررسیها
هنوز بررسیای ثبت نشده است.