توضیحات
چکیده
دو قطعه نيكلي، يكي بدون پوشش و ديگري با پوشش پلاتين در دماي 1070oCدر هواي ساكن تحت اكسيداسيون قرار گرفتند. ساختار دولايه اكسيد نيكل بوسيله ميكروسكپ الكتروني روبشي مشاهده شد. لايه اكسيدي شامل يك لايه دروني هم محور و متخلخل و يك لايه بيروني متراكم و ستوني مي باشد. ماركر ها ( پوشش پلاتيني) كه روي سطح فلز قبل از آزمايش قرار داده شده بودند، بعد از آزمايش در فصل مشترك بين لايه متراكم خارجي و لايه متخلخل داخلي قرار داشتند، حضور ماركر ها در فصل مشترك بين لايه متراكم و متخلخل پوسته نشان مي دهد كه ايه خارجي بوسيله مهاجرت كاتيون به بيرون و لايه داخلي بوسيله مهاجرت اكسيژن بداخل رشد مي كند. در تحقيق حاظر مدل جديدي ارائه مي گردد كه بوسيله آن منشا بوجود آمدن ساختار دو لايه اكسيد نيكل توضيح داده مي شود. در اين مدل واكنش نقص جاي خالي نيكل در فصل مشترك پوسته فلز موجب بوجود آمدن يك جاي خالي اكسيژن باردار مي شود. نفوذ جاي خالي اكسيژن باردار بوجود آمده به سمت خارج از سطح كسيد شروعي براي بوجود آمدن دانه هاي ريز هم محور داخلي مي شود. بنابراين مكانيزم اصلي رشد لايه اكسيد نيكل بوسيله دو مكانيزم توجيه مي شود:1-با نفوذ به سمت داخل جاي خالي نيكل باردار 2-با نفوذ به سمت خارج جاي خالي اكسيژن باردار . در اين راستا جاي خالي اكسيژن باردار در اثر مصرف شدن جاي خالي نيكل بوجود مي آيند.
مقدمه
اكسيداسيون نيكل در صنايعي كه در درجه حرارت بالا كار مي كنند مانند پره توربين هواپيما و نيروگاه هاي برق و صنايع نفت از اهميت ويژه اي برخوردار مي باشد، به همين دليل در حال حاظر تحقيقات گسترده اي در صنايع مختلف روي آن صورت گرفته و موضوع به روز مراكز مختلف تحقيقاتي دنيا مي باشد . تئوري اكسيداسيون فلزات بوسيله واگنر ارائه گرديد. او بطور كلي فرض كرد مهاجرت يونها يا الكترونها در ضخامت پوسته، فرآيند كنترل كننده سرعت مي باشد. يكي از مكانيزم هايي كه اكسيداسيون نيكل را توضيح مي دهد، فرض را بر اين قرار داده است كه بعد از تشكيل اوليه پوسته اكسيد نيكل، اتم هاي نيكل به سمت بيرون لايه اكسيد حركت كرده و جاي خالي ايجاد شده به سمت داخل نفوذ مي ند. اگر اين فرض صحيح باشد شواهد موجود كه نشان مي دهد لايه اكسيدي از دو ريز ساختار ستوني و هم محور تشكيل شده است را نقض مي كند.
ABSTRACT
Two pieces of nickel, one uncoated and the other with platinum cover at 1070 ° C in the air were stagnant under oxidation. Nickel oxide double layer structure was observed by scanning electron microscope. The oxide layer consists of an interconnected and porous inner layer and a dense and columnar outer layer. The markers (platinum cover) placed on the surface of the metal before the test, after the experiment, were located in the joint between the external dense layer and the porous inner layer, indicating the presence of markers in the joint between the dense and porous layer of the shell. The outer region grows through the extinction of cations and the inner layer through the migration of oxygen. A new model is presented in this study, which explains the origin of the formation of the two layers of nickel oxide. In this model, the reaction of defective nickel in the joint region of the metal shell causes the formation of an empty place of pregnant oxygen. Infiltration of vacant oxygen up to the outside of the surface of the effervescence begins to form internal coarse grains. Therefore, the main mechanism for the growth of the nickel oxide layer is explained by two mechanisms: 1. By penetrating into the vacant place of nickel, pregnant. 2. By penetrating into the outer space of the empty oxygen supply. In this regard, vacant oxygen supply occurs as a result of the use of vacant nickel.
INTRODUCTIOIN
Nickel oxidation is of particular importance in industries that work at high temperatures, such as turbine blades and power plants and petroleum power plants. For this reason, there are currently wide-ranging research in various industries, and the subject The day of research centers in the world. The theory of oxidation of metals was presented by Wagner. He generally assumed that the migration of ions or electrons in the thickness of the shell is a process controller of velocity. One of the mechanisms that describes the oxidation of nickel, assumes that after the initial formation of the nickel oxide shell, the nickel atoms move to the outer surface of the oxide layer and penetrates the empty space inward. If this assumption is correct, there is evidence that the oxide layer is composed of two pivotal and axial microstructures.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Saeed Kiani, Mehdi Emsiaki, Sirous Javadpour, Alireza Sabour
File Information: persian Language/ 12 Page / size: 768 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : سعيد كياني ، مهدي امساكي ، سيروس جوادپور ، عليرضا صبور
اطلاعات فایل : زبان فارسی / 12 صفحه / حجم : KB 768
نقد و بررسیها
هنوز بررسیای ثبت نشده است.