توضیحات
چکیده
كمپوزيتهاي زمينه آلومينيومي تقويت شده با ذرات سراميك به دليل مقاومت سايشي بالا، مدول و استحكام بالا وخواص مناسب براي كاربردهاي دماي بالا در كنار سبك وزن بودن و ضريب انبساط حرارتي پایین توجه سازندگان صنايع نظامي، هوافضا و خودروسازي را به خود جلب نموده است. اما انعطاف پذيري پايين و چقرمگي شكست نسبتاً كم كاربرد اين گروه از مواد را محدود ميسازد. دراین تحقيق با استفاده از روش آسياب کاري و متالورژي پودر، نانوکمپوزيت Al – Al2O3ساخته شده است. خواص مکانیکی و ريز ساختار نمونه ها بررسي شدند. نتايج تست فشار نشان دادند که با افزايش درصد وزني نانوذرات تقويت کننده، استحکام و داکتیلیتی بر خلاف انتظار، افزايش یافته است.
مقدمه
آلومينيوم و آلياژهاي آن جزء مهمترين فلزات مورد استفاده در صنايع هوافضا، نظامي و خودرو ميباشند. بر همين اساس كمپوزيتهاي زمينه فلزي( MMCs(Metal Matrix Compositesو عليالخصوص كامپوزيتهاي زمينه Alطي دو دهه گذشته بسيار مورد توجه قرار گرفته است . نتايج تحقيقات اخير حاكي از آن است كه با كاهش اندازه ذرات تقويت كننده تا حد نانومتر علاوه بر استحكام تسليم، انعطاف پذيري و چقرمگي شكست افزايش مييابد. از معايب روشهاي ريخته گري عدم توزيع يكنواخت تقويت كننده در زمينه ميباشد. با اضافه كردن پودر آلومينا به آلومينيوم و انجام آسياب، ذرات آلومينا در مقياس نانومتري در زمينه آلومينيوم پخش ميشوند كه باعث كاهش اندازه دانه ها و قفل شدن نابجايي ها در زمينه آلومينيوم ميشوند. لذا استحكام و سختي و ساير خواص مكانيكي آلومينيوم و خواص دماي بالاي كمپوزيت ويژگيهاي بهتري از خود نشان ميدهد. اولين نياز يک کمپوزيت براي نشان دادن خواص فوق العاده خود، توزيع يکنواخت تقويت کننده ميباشد.
ABSTRACT
Aluminum composite reinforced with ceramic particles due to its high abrasion resistance, high modulus, high strength, and suitable properties for high temperature applications along with light weight and low thermal expansion coefficient, attracted the attention of manufacturers of military, aerospace and automotive industries. However, the low flexibility and toughness of the relatively low failure of this group of materials is limited. In this research, Al-Al2O3 nanocomposite was constructed using powder milling and powder metallurgy. Mechanical properties and microstructure of the samples were studied. The results of the pressure test showed that, by increasing the weight percent of the reinforcing nanoparticles, strength and dactylity increased unexpectedly.
INTRODUCTION
Aluminum and its alloys are one of the most important metals used in aerospace, military and automotive industries. Accordingly, metal matrix composites (MMCs) and especially Al-composite composites have been widely considered over the past two decades, and recent research has shown that by reducing the size of nanoparticles up to nanometers, in addition to the strength of submission, flexibility And the fracture toughness increases.One disadvantages of casting methods are the lack of uniform distribution of reinforcement in the field.In addition of alumina powder to aluminum and milling, alumina particles are distributed on a nanoscale scale in the aluminum field, which reduces grain size and locking Displacements are in the field of aluminum Strength, hardness, and other mechanical properties of aluminum and high temperature properties of composite properties. The first requirement of a composite is to demonstrate its superior properties, uniform distribution of the amplifier.
Year: 2017
Publisher : 11th National Congress of metallurgy of Iran
By : Hamid Rahbar, Seyyed Abdolkarim Sajjadi, Seyyed Mojtaba Zebrajd
File Information: persian Language/ 11 Page / size: 1,40 KB
سال : 1396
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : حمید محبوب، سید عبدالکريم سجادي ، سید مجتبي زبرجد
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 1,40
نقد و بررسیها
هنوز بررسیای ثبت نشده است.