توضیحات
چکیده
در اين مقاله خصوصيات مكانيكي و ريز ساختاري آلياژ آلومينيوم ـ مس ، تقويت شده به وسيله فاز هاي استحكام بخش بررسي شد.Al2O3 وTiB2 نتايج نشان مي دهد كه افزايش استحكام توسط افزودن مستقيم TiB2و Al2O3به مذاب امكان پذير است.تصـاوير بـه دست آمده از ميكروسكوپ الكتروني بيان گر رسوب ذرات TiB2در مرز دانه در كنار رسـوبات Cu2Alمـي باشـد؛ در حالي كه ذرات Al2O3متمايل به رسوب به شكل توده اي مي باشد.اضافه نمـودن تـوأم فـاز هـاي TiB2و Al2O3 موجب افزايش بيشتري در استحكام كششي شود.
مقدمه
كامپوزيت هاي زمينه فلزي گروهي از مواد مـي باشـند كـه بـه لحـاظ سـاختاري ، خصوصـيات مكـانيكي و… از اهميـت زيادي برخوردارند. فاز هاي استحكام بخش شامل ذرات ريز سراميكي يا الياف اكسيدي بسيار سخت مـي باشـند.اخيـرا ذرات فـاز اسـتحكام بخش كامپوزيت هاي زمينه فلزي از نظر خصوصيات فيزيكي ، خصوصيات همسانگرد و نحوه توليـد مـورد توجـه قـرار گرفته است.يك نوع از مواد تركيبي با اضافه كردن مستقيم فاز استحكام بخش به مذاب توليد مي شود. از مزاياي استفاده از اين روش ، فصل مشترك تمييز فاز تقويت كننده / زمينه ، استفاده از ذرات استحكام بخش با انـدازه و توزیع يكنواخت و همچنين صرفه اقتصادي را نام برد.در دو دهه اخير از اين روش توليد براي توليد مواد تركيبي بسيار استفاده شده است زيرا نسبت به روش هاي ديگر از جمله سنتز احتراقي و متالورژي پودر امكان پذير تر مي باشد. انتخاب يك فاز استحكام بخش در توليد كامپوزيت به روش اضافه نمودن مستقيم در مذاب بسيار مهـم اسـت ؛ در سـال هاي گذشته مواد تركيبي با فازهاي استحكام بخش متنوع از جمله SiC ، TiC TiB2، Al2O3و BNساخته شـده است. يكي از مهمترين عوامل اثر گذار بر خواص مواد مركب ، وضعيت فاز تقويـت كننـده از جملـه شـكل ، انـدازه و درصـد حجمي اين فاز مي باشد.تقويت كننده به دليل استحكام و مدول الاستيك زيادي كه دارد نه تنها سبب تقويـت اسـتحكام مواد مركب مي گردد بلكه سبب مي شود تغييراتي در ريز ساختار زمينه رخ دهد و از ايـن راه نيـز خـواص مـاده مركـب تحت تاثير قرار مي گيرد. در اين تحقيق اثر فاز هاي استحكام بخش بر خصوصيات مكانيكي و ريز ساختاري آن بحث شده است.
ABSTRACT
Microstructures and mechanical properties of Al–Cu matrix composites reinforced by in situ TiB2 and Al2O3 particulates have been investigated in this paper. Result of XRD analysis indicates that the (Al2O3 +TiB2)/Al–Cu composites can be fabricated with the direct melt reaction method. Analysis in SEM shows that TiB2 particles distribute along the grain boundaries and interweave with CuAl2 phase; while Al2O3 particles have a tendency to agglomeration.
INTRODUCTION
Metal-based composites are a group of materials that are structurally, mechanically and economically important. The phase strengths of the microcrystalline or oxide fibers are very hard. Particularly, the phase-strength particles of the metal-based composite component have been considered in terms of physical properties, isotopic characteristics and production patterns. A type of combined material with direct addition The masonry strength phase is produced. The advantages of using this method are the synchronous separation phase of the reinforcing phase / background, the use of particles with a uniform size and distribution, as well as cost-effective economics. In the last two decades, this method has been used to produce compound materials. Because it is more feasible than other methods, such as combustion synthesis and metallurgy. The choice of a reinforcing phase is very important in the production of composite by adding direct to the melt; in recent years, composite materials have been developed with various phase strengthening phases, including SiC, TiC TiB2, Al2O3 and BN. One of the most important factors affecting the properties of composite materials is the phase enhancer status, including the shape, size and volume of this phase. The stabilizer, due to its strength and high elastic modulus, not only enhances the strength of composite materials, but also causes Changes in the microstructure of the background can occur, and the properties of the composite material are also affected. In this research, the effect of strengthening phases on mechanical and microstructural properties of the material is discussed.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Farid Hadadi, Arash Shafiee, Mahdi Omidi, Shahram Alikhani
File Information: persian Language/ 9 Page / size: 559 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : فريد حدادي ، آرش شفيعي ، مهدي اميدي ، شهرام عليخاني
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 559
نقد و بررسیها
هنوز بررسیای ثبت نشده است.