توضیحات
چکیده
روش سل – ژل احتراقي يكي از روشهاي متداول در توليد نانو پودرها ميباشد. در اين روش كه روشي جديد با تركيبي بي نظير از روش سل – ژل و فرآيند احتراقي است، علاوه بر بهرهمند شدن از مزاياي روش -سل ژل و سنتز احتراقي با روشي ساده تر و ارزانتر، ذرات نانو پودر با اندازه ذرات ريزتر و توزيع يكنواخت تر و خلوص بالاتر به دست مي آيد در اين تحقيق با استفاده از روش سل – ،ژل احتراقي نانو پودر اكسيد روي تشكيل شده است. نتايج نشان دادند كه استفاده از سوخت اسيد سيتريك، نسبت سوخت به مواد اوليه pH ، 5/0خنثي و دماي كلسيناسيون 500درجه سانتيگراد براي دستيابي به نانو پودرهاي اكسيد روي با ابعاد تقريبي 30nm امكان پذير خواهد بود.
مقدمه
در روش سل – ژل احتراقي ابتدا مواد اوليه كه عمدتاً به صورت تركيبات نيتراتي هستند در يك حلال آبي مانند اسيد سيتريك در نسبت هاي مولي مناسب حل ميشوند و معمولاً براي تنظيم pHاز بازهاي ضعيفي مانند آمونياك استفاده ميشود. حرارت دادن محلول اوليه سبب تبديل سل به يك ژل با ويسكوزيته بالا ميگردد. ژل حاصل با بالا رفتن دما طي يك فرآيند احتراقي به شدت گرمازا ناشي از واكنش مواد آلي به عنوان عامل احيا كننده و نيترات ها به عنوان عامل اكسيد كننده، به خاكستري نرم و به شدت متخلخل تبديل ميشوند كه با كلسينه كردن در دماي مناسب به محصول نهايي تبديل ميگردد. در روش سل – ژل احتراقي از يك عامل اكسيد كننده و يك سوخت به عنوان عامل احيا استفاده ميشود. كنترل نسبت مناسب اكسيد كننده به سوخت ميتواند به گرماي بالاي حاصل از واكنش ها منجر شود. بنابراين به منظور بهره گيري از واكنش هاي گرمازا، انتخاب نسبت مناسب اكسيد كننده به سوخت از اهميت بالايي برخوردار ميباشد. انتخاب نامناسب نسبت نيترات ها به سوخت، به ايجاد فازهاي مياني ناخواسته يا مواد اوليه واكنش نيافته منجر ميشود. بطور كلي سوخت بايد آرام واكنش كند و نيز به عنوان يك كمپلكس كننده براي كاتيونها عمل كند. كمپلكس ها حلاليت كاتيون هاي فلزي را افزايش ميدهند و بنابراين از كريستاليزاسيون ترجيحي حين تبخير آب محلول اوليه جلوگيري ميكنند.
ABSTRACT
The sol-gel method of combustion is one of the common methods for the production of nano-powders. In this method, which is a new method with a unique combination of sol-gel and combustion process, in addition to taking advantage of the gel method and combustion synthesis with a simpler and cheaper method, nano powder particles with a finer particle size and uniform distribution The purity and purity are higher. In this research, a nanocomposite gel of zinc oxide powder is used in the present study. The results showed that the use of citric acid fuel, the ratio of fuel to the raw material pH, neutralized 0.5 and the calcination temperature of 500 ° C would be possible to reach zinc oxide nanoparticles with an approximate dimension of 30 nm.
INTRODUCTION
In the sol-gel method, first, raw materials, mainly nitrate compounds, are dissolved in aqueous solvent such as citric acid in appropriate molar ratios, and usually used for adjusting pH from weakly diluted bands such as ammonia. The heating of the initial solution causes the cell to become a high-viscosity gel. The resulting gel with temperature rises during an extremely hot combustion process due to the reaction of organic matter as a reducing agent and nitrates as an oxidizing agent are converted to a very soft and highly porous gray which, by calcination at the appropriate temperature, The final one is converted. In the sol-gel method, an oxidizing agent and a fuel are used as a reducing agent. Controlling the relative ratio of oxidizing to the fuel can lead to high heat from the reactions. Therefore, in order to use the thermoplastic reactions, selecting the appropriate oxidizing ratio for fuel is very important. The inappropriate choice of nitrate to fuel ratio leads to unwanted intermediate phases or unreactive raw materials. In general, the fuel must react slowly and act as a complex for cations. Complexes increase the solubility of metal cations and thus prevent pre-crystallisation during initial evaporation of the initial solution water.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Nastaran Riahi Nouri – Rasoul Sarraf Mamouri – Ali Mahdikhani
File Information: persian Language/ 8 Page / size: 1.49 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : نسترن رياحي نوري – رسول صراف ماموري – علي مهديخاني
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 1.49
نقد و بررسیها
هنوز بررسیای ثبت نشده است.