توضیحات
چکیده
در مقاله حاضر فولاد زنگ نزن 304به وسيله ليزر Nd:YAGپالسي و Micro TIGجوشكاري شده است و ريزساختارهاي آن در شرايط جوشكاري مختلف جهت اعمال سرعت سرمايش هاي مختلف مورد بررسي قرار گرفته است. نتايج اين پژوهش نشان ميدهد كه در فلز جوش اين فولاد با نسبت كرم معادل به نيكل عادل،1.61 انجماد آستنيتي رخ ميدهد. همچنين، با افزايش سرعت سرمايش وكاهش ولتاژ(توان) در جوشكاري ليزر، وكاهش شدت جريان در جوشكاري ،Micro TIGلبه هاي جوش به صورت فريتي منجمد مي شوند. در اؤن تحقيق، همجنين عيوب حاصل شده ازهر دو روش مورد بررسي قرار گرفته و با يكديگر مقايسه شده اند (اين عيوب شامل ترك گرم، تخلخل، آلودگي تنگستني و …مي باشد) . سپس نمونه ها تحت ريز سختي سنجي قرار گرقته و استحكام آنها با يكديگر مقايسه شده است.
مقدمه
جوشكاري پرتو ليزر يكي از روشهاي مورد توجه براي جوشكاري تمام آلياژها است كه از مزاياي آن ميتوان به سرعت جوشكاري بالا، اعوجاج كم و راحتي اتوماسيون آن اشاره كرد. ليزرها انواع مختلفي دارند كه ليزر گازي CO2و ليزر جامد Nd:YAGبيشتر در جوشكاري كاربرد دارند. هر دو نوع ليزر را مي توان به صورت پيوسته يا پالسي به كار برد، كه با تبديل ليزر پيوسته به حالت پالسي ميتوان، توان ليزر را افزايش داد و جوشكاري با الكترود تنگستني تحت گاز محافظ (TIG) يكي از روشهاي جوشكاري ذوبي است كه در آن الكترود تنگستن، مصرف نشدني و گاز براي محافظت از قوس به كار برده مي شودكه به همين دليل براي جوشكاري تقريبا تمامي آلياژها استفاده مي شود. جوشكاري Micro TIGاز انواع جوشكاري TIG است كه از نظر كيفيت تقريبا شبيه TIGاست ولي بازه شدت جريان جوشكاري در آن 30-1آمپر مي باشد. تجهيزات مورد استفاده در روش مانند روش جوشكاري TIGبوده و فقط نيازي به فلز پركننده ندارد. فولاد زنگنزن 304معروفترين و پر كاربردترين آلياژ در خانواده فولاد زنگ نزن است و مقاومت به خوردگي خوب، شكل پذيري عالي، ساخت آسان و استحكام مناسب دارد. به علت اينكه فولادهاي زنگ نزن آستنيتي در اثر سريع سرد شدن دچار استحاله مارتنزيتي نميشوند، پيشگرم و كنترل دماي بين پاسي در آنها لازم نيست.
ABSTRACT
The results of this study show that in the welding metal of this steel with an equivalent ratio of crude to neutral nickel, 1.61 austenitic solidification occurs. Also, by increasing the cooling speed and reducing the voltage (power) in the laser welding, and reducing the flow rate in the welding, Micro TIG, the weld edges are frozen as a ferrite. The specimens were then subjected to micro-hardness determination and their strength was compared with each other.
INTRODUCTION
Laser beam welding is one of the preferred methods for welding alloys. Its advantages include high welding speed, low distortion and easy automation. Lasers have different types of CO2 gas lasers and Nd: YAG solid laser applications that are most commonly used in welding. Both types of laser can be applied continuously or by pulse, which can be used to increase the laser power by converting the laser continuously to the pulse state. TIG welding is one of the methods used in welding. This tungsten electrode is used and unprotected gas to protect the arches, which is why it is used to weld almost all the alloys. Micro TIG welding is a type of TIG welding which is almost TIG-like in quality, but the intensity of the welding current is 30-1 amperes. The equipment used in this method is TIG welding method and does not require filler metal. Sintering steel 304 is the most famous and most used alloy in the stainless steel family and has good corrosion resistance, excellent ductility, easy construction and proper strength. Due to the fact that austenitic stainless steels do not undergo martensitic transformation due to rapid cooling, they do not need to be prognosticated and there is no need to control the passage temperature.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Seyyed Ali Asghar Akbari Mousavi, Kazem Abbasi Vali Kandy, Asghar Ghareh Daghi
File Information: persian Language/ 12 Page / size: 2.29 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : سيد علي اصغر اكبري موسوي ،كاظم عباسي ولي كندي ، اصغر قره داغي
اطلاعات فایل : زبان فارسی / 12 صفحه / حجم : KB 2.29
نقد و بررسیها
هنوز بررسیای ثبت نشده است.