توضیحات
خلاصه
هدف از اين تحقيق طراحي فرآيند توليد قطعات ديرگداز سراميكي بر پايه مولايت – كوراندم به روش قالبگيري تزريقي با تاكيد برساخت ماهيچه هاي سراميكي مي باشد . بدين منظور ابتدا يك دوغاب سراميكي با نسبت هاي وزني %30كائولن (Al2O3, 2SiO2 ,2H2O) %40آلومينا %25،(AL2O3) زيركن (SiO2ZrO2) و %5بالكلي ( Balcly) تهيه و تاثير روانساز هاي تري پلي فسفات سديم ، و سيليكات سديم بر خواص رئولوژي آن مورد مطالعه قرارگرفت . مشخص شد تري پلي سفات سديم در مقايسه با سيليكات سديم از قابليت بهتري در روانسازي دوغاب سراميكي يادشده برخوردار است . مطالعات نشان مي دهد دوغاب سراميكي در صورت افزودن %0/3وزني اين روان ساز بهترين خواص جرياني را خواهد داشت . چون دقت ابعادي لازمه ماهيچه هاي سراميكي مورد استفاده در ريخته گري انواع پره توربين است ، لذا كنترل تغييرات حجمي حين فرآيند توليد و تكرار پذيري آن از اهميت بسيار بالائي برخوردار خواهد بود . به همين منظور در ادامه كارتاثير دما بر استحكام و درصد انقباض قطعه مورد بررسي قرار گرفت و مشخص شد دماي ºC 1240براي پخت قطعه مناسب است . مجموع انقباضات ماهيچه اعم از انقباض خام و انقباض پخت در دماي ياد شده در مجموع %6/8مي باشد . مراحل كنترل كيفي ماهيچه توسط بازديد چشمي ، كنترل ابعادي با كوليس و كنترل پروفيل با گيلتون گيج صورت پذيرفته است . نتايج كار مبين قابليت خوب و رضايت بخش فرآيند ريخته گري دوغابي در توليد ماهچه هاي سراميكي با كيفيت مناسب و تكرار پذيري قابل قبول مي باشد . در حال حاضر ماهيچه هاي توليد شده با روش مزبور بطور موفقيت آميز و در حد نيمه صنعتي در حال توليد بوده و در ريخته گري پره هاي توربين گازي فريم پنج مورد استفاده قرار مي گيرند.
مقدمه
امروزه ماهيچه هاي سراميكي از ملزومات مهم در ساخت انواع پره توربين محسوب مي شوند . اين قطعات از جنس مواد نسوزند و بصورت پيش ساخته به منظور ايجاد حفره با اشكال ويژه در اين گونه محصولات مورد استفاده قرار مي گيرند. هندسه پيچيده و دقت ابعادي بالا از جمله مشخصات اين نوع حفرات مي باشند .يكي از روش هائي كه در صنعت سراميك براي توليد قطعات سراميكي با اشكال پيچيده و غير متقارن موردمصرف زيادي دارد ، روش ريخته گري دوغابي مي باشد .
ABSTRACT
The purpose of this study was to design the process of production of ceramic-based refractory ceramic parts based on Mullite-Curranam by injection molding method with the emphasis on ceramic muscle building. To this end, a ceramic slurry with a weight ratio of 30% Kaolin (Al2O3, 2SiO2, 2H2O), 40% Al2O2, (AL2O3) zircon (SiO2ZrO2) and 5% Balcly was prepared and the effect of Sodium Tripolyphosphate and Sodium Silicate It was studied on its rheological properties. It was found that sodium trisiliphenate in comparison with sodium silicate has a better ability to lubricate the ceramic slurry. Studies show that ceramic slurry in the case of the addition of 0.3% by weight of this lubricant will have the best flow properties. Because the dimensional accuracy of the ceramic muscles used in the casting of various types of turbine blades, the control of volumetric changes during the production process and its repeatability is very important. For this purpose, the effect of temperature change on the strength and fracture percentage was investigated and it was determined that the temperature of 1240 ° C is suitable for baking. Total muscle contractions, including raw contraction and cake contraction at a temperature of 8.6% total. The stages of muscle quality control are performed by visual inspection, dimensional control with the caliper and the control of the profile with Gilton Giyeb. The results of this study indicate that the slurry casting process has a good and satisfactory capability in production of ceramic fish with good quality and acceptable reproducibility. At present, the muscles produced by the method are successfully and semi-industrial and are being used in the casting of the gas turbine blades of frame 5.
INTRODUCTION
Today, ceramic muscle is one of the most important requirements in the manufacture of turbine blades. These parts are made of non-refractory materials and are pre-fabricated to create a special cavity in these products. Sophisticated geometry and high dimensional accuracy are the characteristics of this type of cavity. One of the methods used in the ceramic industry to produce ceramic parts with complex and non-symmetrical forms is the slurry casting method.
KB 345 :اطلاعات فایل : زبان فارسی / 14 صفحه / حجم
نقد و بررسیها
هنوز بررسیای ثبت نشده است.