توضیحات
چکیده
آلياژ AZ31منيزيم از جمله آلياژهاي کارپذير منيـزيم مـي باشـد کـه پتانـسيل كـاربري بـالايي بـر آن در دهه هاي آينده پيش بيني مي شود اما. اين آلياژ با توجه به ساختار کريستالي خود شکل پذيري محـدوديدر دماي پايين دارد. بنابراين شکل دهي اين آلياژ غالبا در شـرايط گـرم صـورت مـي گيـرد. از آنجائيكـه فرآيندهاي تغيير شكل چند مرحله اي (نورد چنـد مرحلـه اي، آهنگـري چنـد مرحلـه اي و …) بـه دلايـل مختلف تكنيكي ساختاري از روشهاي صنعتي معمول شكل دهي فلزات و آلياژهـا مـي باشـند، توجـه بـه فرآيندهاي ترميم استاتيك كه در زمان توقف بـين مراحـل شـكل دهـي رخ مـي دهنـد از اهميـت بـالايي برخوردار است. به همين نظور در پژوهش حاضر بـا انجـام آزمـايش هـاي فـشار گـرم دو مرحلـه اي در دماهاي 325 °C ،250°Cو 400 °Cو نرخ كرنش هاي 0/01 s-1 ،0/001 s-1و 0/1 s-1و زمانهـای توقف متفاوت (4-250s ) به بررسي تغييرات ريزساختاري حاصل از انجام فرآينـدهاي تـرميم اسـتاتيك در آلياژ AZ31منيزيم پرداخته شده است.
مقدمه
كاربرد آلياژهاي منيزيم سبب كاهش وزن قطعات ساخته شده مي شود لذا در دو دهه اخير استفاده از اين آلياژها در صنايع مختلف بويژه صنايع خودرو سازي و الكترونيك رو به افزايش بوده است. اما آلياژهای منيزيم به دليل ساختمان كريستالي فشرده از نوع hcpو تقارن شبکه ای پايين، در دماهای پايين کارپذيری محدودی از خود نشان می دهند. بنابراين فرآيندهای شکل دهی اين آلياژها عمدتا در شرايط گرم صورت می گيرد. در اين ميان فرآيندهاي تغيير شكل گرم چند مرحله اي همانند فرآيند نورد گرم چند مرحله اي و آهنگري گرم چند مرحله اي و … از جمله فرآيندهاي شكل دهي متداولي هستند كه در صنعت بكار گرفته مي شوند. در اين فرآيندها به دليل انرژي ذخيره شده در ساختار و ناپايداري ترموديناميكي، امكان وقوع فرآيندهاي ترميم استاتيك ر زمان توقف بين مرحله اي وجود دارد.وقوع فرآيندهاي ترميم استاتيك سبب تغييرات ريزساختاري و بنابراين تغيير متوسط اندازه دانه ها مي شود، كه اين نبز به نوبه خود از فاكتورهاي مهم ساختاري است و نقش تعيين كننده اي در خواص مكانيكي نهايي دارد. لذا در اين راستا، شناسايی تحولات ريزساختاری در بهينه سازی فرآيندهای توليد می تواند موثر واقع شود. در اين مطالعه با بكارگيري آزمايش هاي فشار گرم دو مرحله اي بر روي آلياژ AZ31منيزيم به بررسي عوامل موثر بر تغييرات متوسط اندازه دانه حاصل از وقوع فرآيندهاي ترميم استاتيك پرداخته شده است.
ABSTRACT
The AZ31 alloy of magnesium is one of the most potent magnesium alloys to be used in the decades to come. Due to its crystalline structure, this alloy has a finite temperature limitation. Therefore, the formation of this alloy is often carried out under warm conditions. Since multi-stage rolling processes (multi-stage rolling, multi-stage blacksmith, etc.) are, for various structural reasons, the usual industrial methods of forming metals and alloys, attention to static repair processes that occur at the time of stopping The forming stages are of great importance. In this study, two-stage hot pressures at temperatures of 325 ° C, 250 ° C and 400 ° C and strain rates of 0.01 s-1, 0.001 s-1 and 0/1 s-1, and times Different stops (4-250s) investigated the microstructural changes resulting from static repair processes in AZ31 magnesium alloy.
INTRODUCTION
Application of magnesium alloys reduces the weight of manufactured parts. Therefore, in the last two decades, the use of these alloys has increased in various industries, especially automotive and electronic industries. However, magnesium alloys exhibit limited permeability at low temperatures due to the compact crystalline structure of the type hcp and low network symmetry. Therefore, the forming processes of these alloys are mainly in hot conditions. In this context, the processes of multi-stage hot forming such as the multi-stage hot-rolling process and the multi-stage hot-blasting process are among the most commonly used shaping processes used in the industry. In these processes, due to the energy stored in the structure and the thermodynamic instability, there is the possibility of occurrence of static repair processes during inter-stage interruption. The occurrence of static repair processes causes microstructural changes and, therefore, a moderate change in the size of the seeds, which, in turn, It is one of the most important structural factors and plays a decisive role in mechanical properties. In this regard, identification of microstructural changes in optimizing production processes can be effective. In this study, using two-stage hot stress tests on magnesium AZ31 alloy, factors affecting the moderate grain size changes due to the occurrence of static restoration processes have been investigated.
Year: 2017
Publisher : 11th National Congress of metallurgy of Iran
By : Massoumeh Shamsi, Abbas Zarei Hanzaki, Peyman Sahapour
File Information: persian Language/ 10 Page / size: 2,08 KB
سال : 1396
ناشر : يازدهمين كنگره ملي مهندسين متالوژی ايران
کاری از : معصومه شمسي ،عباس زارعي هنزكي ، پيمان صحرا پور
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 2,08
نقد و بررسیها
هنوز بررسیای ثبت نشده است.