توضیحات
چکیده
آلیاژ A206یک آلیاژ مستعد به خوردگی موضعی است. در این تحقیق به بررسی تأثیر غلظت کلر بر مقاومت به خوردگی آلیاژ A206پرداخته شده است. بررسی های مورفولوژیکی توسط میکروسکوپ فلورسرنت انجام شد. برای انجام آزمون پلاریزاسیون از دستگاه پتانسیو استات/گالوانواستات استفاده شده است. در انجام آزمایش از نمونه های ریختگی در قالب مسی استفاده شد. نتایج حاکی از افزایش نرخ خوردگی با افزایش غلظت یون خورنده کلر در محلول است همچنین بیانگر انجام شدن دو واکنش با پتانسیل های متفاوت در سطح کاتد برای مصرف الکترون است. یونهای کلر با ایجاد ترکیب AlCl3از تشکیل رسوب چسبتده بر سطح آلیاژ جلوگیری میکنند. نتایج نشان داده است که فازهای بین فلزی Al-Cu-Mgموجود در آلیاژ A206در محلول های با غلظتهای متفاوت 3.5 ،3.2 wt. % NaCl و 3.8به سرعت خورده میشوند. انحلال انتخابی Alو Cuدر رسوبات باعث شروع خوردگی حفره ای میشود .
مقدمه
آلیاژهای Al-Cuگروه مهمی از آلیاژهای غیرآهنی هستتد که به دلیل استحکام بالایی که دارند کاربرد فراتری در صنایع مختلف به ویژه صنعت هوا-فضا دارند. این آلیاژها در دو دسته ریختگی (برای تولید قطعات شکلدار) و کارپذیر (برای تولید ورق و مقاطع کارشده) قرار میگیرند. در میان آلیاژهای کارپذر ،Al-Cuآلیاژ Al-2024کاربرد بیشتری دارد. هنچنین آلیاژ A206در بین آلیاژهای ریختگی بسیار پرکاربرد است که تفاوت این دو آلیاژ در مقدار Mg موجود در آنها است. آلیاژهای که در آن مس، عتصر اصلی آلیاژی است، با افزایش محتوای مس، مقاومت به خوردگی کاهش می یابد. این اثر به حضور سلول های گالوانیزه ایجادشده توسط تشکیل مناطق غنی از مس و یا فیلمها در سطح مربوط میشود. با گذشت زمان و رسیدن محلول به کاتدهای مس، آلومینیوم خورده میشود. احیای یونهای مس و افزایش واکنش– های – O2و + Hباعث افزایش نرخ خوردگی میشوند.
ABSTRACT
The A206 alloy is an alloy that is susceptible to local corrosion. In this research, the effect of chlorine concentration on corrosion resistance of A206 alloy has been investigated. Morphological studies were performed with fluorescence microscope. A potentio acetate / galvanostat has been used to conduct polarization testing. In the experiments, copper casting samples were used. The results indicate an increase in the corrosion rate by increasing the concentration of corrosive chlorine ions in the solution, and also indicates that two reactions with different potentials at the cathode surface for electron consumption are carried out. Chlorine ions prevent the formation of clay deposits on the surface of the alloy by creating AlCl3. The results showed that the intermetallic phases of Al-Cu-Mg in the A206 alloy in solutions with different concentrations of 3.5, 3.2 wt. % NaCl and 3.8 are rapidly eaten. The dissolution of Al and Cu in sediments leads to cavernous corrosion.
INTRODUCTION
Al-Cu alloys are an important part of non-ferrous alloys, which, due to their high strength, have a wider application in various industries, especially the aerospace industry. These alloys are arranged in two types of molding (for the production of shaped parts) and suitable (for the production of sheets and sections worked). Al-Cu Al-2024 alloy is among the most popular alloys in the industry. Also, the A206 alloy is very popular among alloys, the difference between these two alloys is in the amount of Mg contained therein. Alloys in which copper is the main element of alloying, with increasing copper content, corrosion resistance is reduced. This effect is related to the presence of galvanized cells created by the formation of copper-rich regions or films at the surface. Aluminum is eaten into copper cathodes with time passing through the solution. Resuscitation of copper ions and increased reactions – O2 and + H increase corrosion rate.
Year: 2017
Publisher : National Congress of Chemistry and Nanoscience, from Research to National Development
By : Fatemeh Gholami Rad, Mostafa Alizadeh, Ahmad Irannejad
File Information: persian Language/ 7 Page / size: 492 KB
سال :1396
ناشر : کنگره ملی شیمی و نانوشیمی,از پژوهش تا توسعه ملی
کاری از : فاطمه غلامی راد ، مصطفی علیزاده ،احمد ایران نژاد
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 492
نقد و بررسیها
هنوز بررسیای ثبت نشده است.