توضیحات
چکیده
هدف از ساخت و سنتز اين يش شه سراميک به همراه زيرکن تشکيل فازهاي مطلوب براي دفن زباله های راديواکتيو و همچنين بررسي تاثير زیر رکن در آن ميباشد. براي ساخت کامپوزيتها ابتدا شيشه يا تهيه گرديد، سپس شيشه حاصل خرد شده و با پودر زيرکن به عنوان جزء دوم با مقدارهاي ، و درصد وزني مخلوط گرديد، از پودر شيشه و کامپوزيتها قرصهايي تهيه شد و مورد عمليات حرارتي قرار گرفتند و دماي زينترينگ نمونه ها به دست آمد. سپس نمونه ها مورد آناليزهاي XRDو SEMقرار گرفتند. نتايج به دست آمده از آناليز فازها نشان داد که فازهاي تشکيل شده در شيشه سراميک و کامپوزيت ها براي دفن زباله های راديواکتيو مفيد ميباشند و همچنين با توجه به نتايج SEMبا افزايش درصد زيرکن از ميزان فازهاي مطلوب کاسته شده است. این کامپوزيت برای اولین بار ساخته شده است.
مقدمه
امروزه شيشه سراميک ها يکي از مطلوبترين مواد با پتانسيل زیاد در زمينه هاي حرارتي، شيميايي، بيولوژيکي و خواص ديالکتريکي هستند. اين مواد همچنين خواص بهتري نسبت به شيشه ها و سراميکها از خود به نمايش گذاشته اند. محدوده ترکيبي وسيع و امکان اصلاحات ريزساختاري از قابليتهاي ويژه و منحصربفرد شيشه سراميکها است . شيشه سراميکها از نظر دسته بندي موادی مابين شيشه ها و سراميکها هستند. در اين مواد هم ميتواند فاز بلوري، فاز غالب باشد و هم فاز شيشه اي، فاز اصلي قلمداد گردد. گر چه به طور معمول رسيدن به درصدهاي فاز بلورين بالا مشکل است. همچنين، اين مواد ميتوانند شامل چند فاز شيشه اي يا بلوري متفاوت باشند. شیشه سراميکها به سه روش توليد ميشوند: عملیات حرارتي شیشه جامد (روش سنتي )، سرد کردن کنترل شده يک شيشه مذاب، زینترینگ و تبلور پودر شیشه. در مورد روش آخر پودرها در دماهاي نسبتاً پايين با مکانيزم زينتر ويسکوز فلو مترا کم ميشوند. با توجه به مزایای اقتصادي استفاده از دماهاي فراوري نسبتاً پايين، روش تکنولوژي پودر براي توليد محدوده اي از مواد پیشرفته شامل شيشه سراميک ها با تخلخل خاص و کامپوزيتهای زمینه شيشه سرامیکی روشی مناسب است.
ABSTRACT
The purpose of the construction and synthesis of this ceramic with zircon is the formation of optimal phases for the radioactive waste landfill and also the study of the effect of the substrate in it. The glass was first made to make composites, then the glass was crushed and with zircon powder as the second component with the values of and The weight of the mixture was mixed, glasses and composites were prepared and subjected to heat treatment, and the temperature of the zinc plating of the samples was obtained. The samples were then analyzed by XRD and SEM. The results obtained from the phase analysis showed that the phases formed in ceramic glass and composites are useful for radioactive waste disposal, and according to SEM results, by increasing the percentage of zircon, the desired phases have been reduced. This composite was first made.
INTRODUCTION
Today, glass ceramics are one of the most desirable materials with a high potential in terms of thermal, chemical, biological and dielectric properties. These materials also exhibit better properties than glass and ceramics. The wide range of combinations and the possibility of microstructure modifications of the unique capabilities of glass ceramics. Glass Ceramics are categorized as materials between glass and ceramics. In this material, the crystalline phase may be the dominant phase, and the glass phase is considered as the main phase. Although it is typically difficult to achieve high crystalline phase percentages. Also, these materials may include several glass or crystalline phases. Glass of ceramics is produced in three ways: solid glass thermal treatment (traditional method), controlled cooling of a melt glass, sintering and crystallization of glass powder. In the case of the final method, the powders are reduced at low temperatures with a viscous flow meter mechanism. Considering the economic benefits of using relatively low processing temperatures, the powder technology approach is suitable for producing a range of advanced materials including glass porous ceramics and ceramic glass composite materials.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mehrdad Malek, Parvin Alizadeh, Hossein Kazemian, Mohammad Reza Khani
File Information: persian Language/ 10 Page / size: 1,45 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مهرداد مالک ، پروين عليزاده ، حسين کاظميان ، محمدرضا خانی
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 1,45
نقد و بررسیها
هنوز بررسیای ثبت نشده است.