توضیحات
چکیده
شارژ داغ، روشي نوين و موثر در كاهش مصرف انرژي الكتريكي و افزايش قابليت توليد مي باشد. شركت ميدركس سيستمي بر مبناي استفاده ازجاذبه براي جابجايي مستقيم شارژداغ از كوره توليد آهن اسفنجي به كوره EAFطراحي كرده است، كه HOT LINKنام دارد.در اين مقاله روش HOT LINK به وسيله موازنه جرمي و حرارتي مورد بررسي قرار گرفته است و مشاهده مي شود كه با افزايش هر 100 درجه سانتيگراد دماي شارژ،تقريبا 20kWh TLSصرفه جوئي در مصرف انرژي الكتريكي انجام مي شود و در نتيجه راندمان توليد افزايش مي يابد.علاوه بر اين مصرف الكترود نيز كه رابطه خطي با مصرف انرژي الكتريكي دارد (، .0 004kg kWh) كاهش مي يابد نتايج اين بررسي با نتايج مقالات چاپ شده در اين زمينه مطابقت دارد.
مقدمه
در سال 1999براي اولين بار فولاد اسار ، (Essarr Steel) واقع درايالت گاجاراي هند غربي، استفاده از انتقال شارژ داغ را در مقياس كوچك شروع كرد وبتدريج آنرا گسترش داد.در سال 2000شارژ كوره هاي قوس الكتريك اين كارخانه شامل /71 %2آهن اسفنجي داغ،(HDRI) و مابقي قراضه بوده است وتا سال 2001به % 75رسيده است . تا پايان ماه اوريل سال ، 2001شركت اسار ماهانه 44671تن HDRI استفاده كرده است و هدف شركت تا پابان سال بعد رسيدن به شارژ 2/1ميليون تن در سال است. هم اكنون كارخانه توليد آهن و فولاد شديد ،(SHADEED Iron & Steel) در عمان قصد دارد تا نيمه اول سال 2008بخش HOTLINKرا با ظرفيت توليد يك ميليون و پانصد هزار تن HDRIآغاز كند ، كه پيش بيني مي شود سالانه ، 36/8ميليون دلار در مصرف انرژي الكتريكي و الكترود صرفه جوئي شود. در روش ، HOTLINKشارژ داغ مستقيما با استفاده از نيروي جاذبه توسط يك دستگاه آب بندي شده از كوره احيا مستقيم به كوره قوس الكتريك (EAF) منتقل مي شود .دماي HDRIخروجي از كوره احيا مستقيم ، 650-700درجه سانتيگراد مي باشد و افت دمائي در حدود 50درجه سانتيگراد در طول مسير تا كوره EAFايجاد مي شود .در حاليكه در سيستم پنوماتيك انتقال شارژ، دما از 700به 525درجه سانتيگراد مي رسد.
ABSTRACT
Hot charging is a new and effective way to reduce electric energy consumption and increase production capability. Mordrex Systems has developed a system based on the use of the attraction for the direct movement of the charger from the furnace of sponge iron to the EAF furnace, which is called HOT LINK. In this paper, the HOT LINK method is investigated by mass and heat balance. It is observed that with Increasing every 100 ° C of charging temperature, approximately 20kWh of TLS will be achieved by economies in electrical power consumption, resulting in increased production efficiency. In addition, the consumption of electrode also has a linear relationship with electric energy consumption (.0400kg kWh). We find that the results of this study are consistent with the results of published articles in this field.
INTRODUCTION
In 1999, for the first time, the Essarr Steel, located on Western India Gajarai, began to use hot-water transfer on a small scale and gradually expanded it. In 2000, the charging of electric arc furnaces included 71% 2 hot sponge iron , (HDRI) and the rest of the scrap, reaching 75% by 2001. By the end of April, 2001, the company has used 44671 tons of HDIs per month, and the company’s target for Paban next year is to reach 1.2 million tons per year. The SHADEED Iron & Steel Iron and Steel Company in Oman today plans to start the HOTLINK section of the first half of 2008 with a production capacity of one million and five hundred thousand tons of HDRI, which is projected to cost $ 36.8 million per year Save electrical energy and electricity. In the method, HOTLINK hot charging is directly transmitted by using a gravity force from a direct cooling furnace to an electric arc furnace (EAF). The output of the HDRI output from the direct reduction furnace is 650-700 ° C and the temperature drop is about 50 degrees centigrade along the path to the EAF furnace. While in the pneumatic charging system, the temperature ranges from 700 to 525 degrees Celsius.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Houman Fakhrinobey, Soroush Parvizi, Seyyed Khatib Al-Islam Sadrnejad, Mehran Khorramnia
File Information: persian Language/ 9 Page / size: 135 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : هومن فخرنبوي ، سروش پرويزي، سيد خطيب الاسلام صدرنژاد ، مهران خرم نيا
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 135
نقد و بررسیها
هنوز بررسیای ثبت نشده است.