توضیحات
چکیده
در این مقاله شبیه سازي سیستم انتقال نوري مورد بررسی قرار گرفته است. براي رسیدن به کارآیی بالا در سیستم هاي مخابرات نوري، باید پاشندگی گونه به اي محدود شود. همچنین از فیبر شبکه براگ به عنوان عنصر مهم جهت جبران پاشندگی در سیستم هاي مخابرات نوري استفاده میشود. شبیه سازي سیستم بر اساس پارامترهاي متفاوت با استفاده از شبیه ساز OptiSystemانجام میشود. سیگنال بدون بازگشت به صفر با نرخ 20Gb/sدر طول یک فیبر تک مد استاندارد به طول 50Km منتقل میشود. با شبیه سازي مدل سیستم مخابراتی و استفاده از تغییرات پارامتري سیستم که شامل توان ورودي، طول کابل نوري و طول فیبر شبکه براگ میباشد میتوان کارآیی سیستم را افزایش داد. مقایسه دیاگرام چشمی به ازاي فواصل مختلف فیبر و طول فیبر شبکه براگ بهبود کارآیی لینک را نشان میدهد. در این میان از شبکه عصبی براي پیشگویی و بهینه سازي رفتار سیستم استفاده شده است. مقایسه نتایج با استفاده از خروجی شبکه عصبی و شبیه سازOptiSystem توافق خوبی را نشان میدهد.
مقدمه
مخابرات با استفاده از ارسال نور در فیبر نوري روشی براي انتقال اطلاعات از یک محل به محل دیگر میباشد. سیستم انتقال نوري پایه شامل سه عنصر اساسی فیبر به عنوان واسط (کانال انتقال) ، منبع نوري به عنوان ورودي (مبدل سیگنال الکتریکی به سیگنال نوري) و آشکارساز نوري به عنوان خروجی (مبدل سیگنال نوري به سیگنال الکتریکی) میباشد. فیبر با شبکه براگ (FBG)1به عنوان عنصر کلیدي در سیستم هاي مخابرات نوري جهت جبران پاشندگی، فیلتر و هموار کننده بهره مورد اده قرار میاستف گیرد. در قسمت انتقال FBGدر طول فیبر قرار داده میشود. این مورد باعث مجتمع نمودن ساختار میشود. به خاطر پاشندگی رنگی و وقوع پاشندگی مد قطبش که در فیبرهاي تک مد ظاهر میشود باید سازيجبران صورت پذیرد. پاشندگی سیستم نوري را میتوان توسط تقویت– کننده هاي اربیومی (EDFA) جبران نمود .افزایش فرکانس پالس با وجود پاشندگی منفی دست یافتنی میشود پاشندگی رنگی وابسته به موجطول نقش مهمی را در فیبرهاي تکمد بازي میکند. افزارنرم شبیه ساز Optisystem به عنوان یک نرم افزار شبیه– ساز قدرتمند براي طراحی و تست و بهینه سازي انواع لینک هاي نوري در لایه فیزیکی مربوط شبکه به هاي نوري در سیستم هاي LANو MANشناخته شده است.
ABSTRACT
In this paper, the simulation of optical transmission system has been investigated. To achieve high efficiency in optical telecommunication systems, spray dispersion should be limited. Bragg network fiber is also used as an important component for optical dispersion compensation. The simulation of the system is based on different parameters using the OptiSystem simulator. A zero-return signal at 20Gb / s is transmitted over a standard single-mode fiber to a length of 50Km. System simulation can be used to simulate the system’s parameters and to use the system’s parametric changes, including input power, optical cable length and Bragg network fiber length. The comparison of the visual diagram for different fiber distances and the fiber length of the Bragg network shows the improvement of the link efficiency. In the meantime, the neural network is used to predict and optimize the behavior of the system. Comparison of the results shows good agreement with the use of Neural Networks and the OptiSystem simulator.
INTRODUCTION
Telecommunications is a method of transmitting light from a location to another, using optical light transmission. The basic optical transmission system consists of three basic fiber elements as an interface (transmission channel), a light source as an input (an electrical signal transducer to an optical signal), and an optical detector as an output (optical signal transducer to an electrical signal). Brabus network fiber (FBG) 1 is a key element in optical communication systems to compensate for the dispersion, filtering and smoothing effect. In the FBG transfer section, it is placed along the fiber. This makes it possible to integrate the structure. Due to the color dispersion and the occurrence of dispersion of the polarization mode that appears in single-mode fibers, it must be made possible. The diffusion of the optical system can be compensated by the Orbium Amplifiers (EDFA). Increasing the pulse frequency can be achieved with negative dispersion. The diffusion of the moon-dependent color plays an important role in the synthesized fibers. The Optisystem simulator is known as a powerful simulator for designing, testing, and optimizing a variety of optical links in the physical layer of light networks in LAN and MAN systems.
Year: 2017
Publisher : The 2nd International Conference on Knowledge Based Research in Computer Engineering and Information Technology
By : Farhad Khosravi, Shokofeh Irakhi
File Information: Persian Language/ 7 Page / size: 333 KB
سال : 1396
ناشر : دومین کنفرانس بین المللی پژوهش های دانش بنیان در مهندسی کامپیوتر و فناوری اطلاعات
کاری از : فرهاد خسروي ،شکوفه یراقی
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 333
نقد و بررسیها
هنوز بررسیای ثبت نشده است.