توضیحات
چکیده
تيرها از مهمترين عناصر سازه اي در قابهاي ساختماني مي باشند كه مي توانند تحت بارهاي ثقلي، بارهاي جانبي و يا هر دو شكل اين بارها قرار بگيرند. در ارزيابي لرزه اي يك قاب در بسياري موارد ممكن است تيرها آسيب پذير و نيازمند مقاوم سازي تشخيص داده شوند. در اين مقاله روشهاي مختلف مقاوم سازي تيرها از طريق كامپوزيت نمودن، در قابهاي فولادي و بتني مورد بررسي قرار گرفته است. مدل قابهاي منتخب در سه مرحله در نرم افزار ETABSتحليل و تنش ها در مقاطع تيرها تعيين شده است. مراحل اول ودوم بترتيب شامل تحليل تير تحت بارهاي ثقلي موجود و بار زلزله قبل از مقاوم سازي بوده و مرحله سوم به تحليل تير تقويت شده تحت بارهاي زلزله و بارهاي ثقلي اضافي اختصاص يافته است. تنش هاي ايجاد شده در مقطع تقويت شده تير، تحت مجموع بارها با استفاده از اصل جمع آثار قوا تعيين مي شود. با ارائه يك مثال عددي روشهايتقويت برشمرده شده، از نظر فني و اقتصادي با يكديگر مقايسه شده اند.
مقدمه
از جمله روشهاي تقويت مقاطع تيرهاي فولادي و بتني مسلح، اضافه نمودن يك بخش فولادي يا بتني به مقطع آنها مي باشد. نتيجه اين كار تشكيل يك مقطع مركب بتني- فولادي و يا يك مقطع مركب از يك نوع مصالح با شرايط بارگذاري و تحليل تنش متفاوت مي باشد. در سازه هاي فولادي مي توان با استفاده از پوشش بتني و مركب نمودن مقطع علاوه بر تقويت تير، آن را در مقابل خوردگي و آتش سوزي نيز محافظت نمود. از طرف ديگر در برخي موارد با توجه به محدوديتهاي معماري و ابعاد عناصر سازه اي استفاده از فولاد كه داراي مقاومت مخصوص بالاتري است، براي تقويت مقاطع گزينه بهتري مي باشد.
ABSTRACT
The beams are one of the most important structural elements in building frames that can be placed under gravity loads, lateral loads, or both forms of these loads. In a seismic evaluation of a frame, in many cases, the girders are vulnerable and need to be retrofitted. In this paper, various methods of reinforcing beams by composite, in steel and concrete frames have been investigated. The model of selected frames in three stages in ETABS software is analyzed and tensions are determined in the sections of the girders. The first and second stages, respectively, included the analysis of the beam under the existing gravity loads and the earthquake load before the retrofitting, and the third stage was assigned to the analysis of the reinforced beam under earthquake loads and additional gravity loads. The tensions created at the reinforced section of the beam are determined under the sum of loads using the principle of the sum of the effects of the forces. By providing a numerical example of the quality criteria, they are technically and economically compared.
INTRODUCTION
One of the ways to reinforce steel and concrete gun sections is to add a steel or concrete section to the section. The result of this is the formation of a composite concrete-steel section or a composite cross section of a type of material with loading and stress analysis conditions. In steel structures, it can be protected against corrosion and fire by using concrete casing and composite cross-section in addition to reinforcing the beam. On the other hand, in some cases, due to the architectural constraints and the dimensions of the structural elements, the use of steel, which has a higher resistance, is better for reinforcing sections.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohammad Qasem Sahab, Najmeh Shamshiri, Samira Marzban
File Information: persian Language/ 8 Page / size: 220 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محمدقاسم سحاب ، نجمه شمشيري ، سميرا مرزبان
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 220
نقد و بررسیها
هنوز بررسیای ثبت نشده است.