توضیحات
چکیده
با آلياژسازي مكانيكي پودر آلياژ سنگين تنگستن، نهايتاً ريزساختاري شامل نانوكريستال هاي تنگسـتن كـه در زمينه اي آمورف توزيع شده اند به دست مي آيد. اين ساختار نسبت به پودر اوليـه انـرژي بـالاتري دارد و توزيع عناصر فلزي در آن يكنواخت است و لذا امكان سينتر در دماهاي كمتر فرآهم مي شود. در اين تحقيـق مخلوط پودر آلياژ سنگين تنگستن با تركيب 93W 9/4- Ni 1/2- Feدر دو آسياب گلوله اي افقي و ماهواره اي به صورت مجزا تحت آلياژسازي مكانيكي قرار گرفته است و پودرهاي آلياژسازي مكانيكي شده در دماهـاي مختلف سينتر شده اند. نتايج اين تحقيق نشان ميدهد كه رفتار سينتر پودر در اثـر آلياژسـازي مكـانيكي بهبـود يافته است و سينتر اين پودر در دماهاي بسيار پايينتر امكان پذير ميباشد.
مقدمه
آلياژهاي سنگين تنگستن گروهي از كامپوزيت هاي دو فازي هسـتند كـه بـا تركيـب مناسـبي از اسـتحكام، چگالي و داكتيليته كاربردهاي فراواني دارند. اين آلياژها از سينتر مخلوط پودرهاي عنصري در حضور فـاز مايع توليد ميشوند و ساختار آنها شامل دانه هاي كروي از تنگسـتن تـرد مـي باشـد كـه در زمينـه اي از فـاز داكتيل پايه نيكل قرار دارند. علاوه بر كاربردهاي غيرنظامي متعدد، به دليل چگالي بالا و خواص مكـانيكي مناسب، اين آلياژها عمدتاً در نفوذ كننده هاي انرژي جنبشي به كار ميروند. گزارش شده است كه بـا ريز شدن ريزساختار آلياژهاي سنگين تنگسـتن، خـواص مكـانيكي و نيـز قـدرت نفـوذ ايـن آلياژهـا بهبـود مييابد. يك از روش هاي ريز كردن ريزساختار اين آلياژها، آلياژسازي مكانيكي و سينتر حالت جامد آنها ميباشد. آلیاژسازي مكانیكي مخلوط ودر عنصري تنگستن – نیكل-آهن، منجر به تشكیل سـاختار نانوكريسـتالین در پودر ميشود كه در آن نانوكريستال های فوق اشباع تنگستن در زمینه آمـورف پایه نیكـل توزیع شـده انـد.
ABSTRACT
With the mechanical alloying of heavy tungsten alloy powder, the microstructure is finally obtained, including tungsten nanocrystals distributed in the amorphous field. This structure has a higher energy than the primary powder and the distribution of metal elements in it is uniform and hence, the synthesizer is feasible at lower temperatures. In this study, a heavy-alloyed tungsten alloy powder with 9.5-Ni / 1-Fe 2 93W in two horizontal and satellite ball mills was individually machined under mechanical alloying, and mechanized alloying powders were synthesized at different temperatures. The results of this research show that the behavior of the powder cinters has been improved by mechanical alloying and the synthesizer of this powder is feasible at lower temperatures.
INTRODUCTION
Heavy metal tungsten alloys are a group of two-phase composites that have many applications with a good combination of strength, density and ductility. These alloys are produced from a mixed synthesizer of elemental powders in the presence of a liquid phase, and their structure consists of spherical beads of crumbly tungsten, which are in the context of the nickel base dactyl phase. In addition to numerous civilian applications, due to their high density and mechanical properties, these alloys are mainly used in kinetic energy penetrants. It is reported that the microstructure of heavy metal tungsten alloys is reduced, mechanical properties and the penetration power of these alloys are improved. One of the methods of microstructure thinning of these alloys, mechanical alloying and solid state synthesizer. The mechanical alloying of the mixture and in the tungsten-nickel-iron element leads to the formation of a nanocrystalline structure in the powder in which tungsten supersaturated nanocrystals are distributed in the context of the nichrome base amorphous.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Ahmad Ghaderi Hamidi, Hossein Arabi, Jalil Vahdati Khaki
File Information: persian Language/ 11 Page / size: 2.54 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : احمد قادري حميدي ،حسين عربي ،جليل وحدتي خاكي
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 2.54
نقد و بررسیها
هنوز بررسیای ثبت نشده است.