توضیحات
خلاصه
در مقاله حاضر حركت ذرات در حوضچه هاي ته نشيني با كاربرد روش رديابي ذره مدلسازي گرديده است. در توسعه مدل از مباني حاكم بر فرآيند تقسيم سلولي استفاده شده است. به منظور انجام مدلسازي فوق نياز به پارمترهاي هيدروديناميكي جريان بود كه از نرم افزار تهيه شده بر اساس روش حجم محدود استفاده شده است. نتايج مدلسازي نشان مي دهد كه با روش رديابي ذره مي توان مسير حركت ذرات را به خوبي تشخيص داده و از نتايج آن در طراحي حوضچه ته نشيني استفاده و تمهيدات مناسب را براي جمع آوري يا خروج ذرات ته نشين شده در نقاط مستعد پيش بيني و احداث نمود.
مقدمه
حيات و پيشرفت تمام جوامع بشري نيازمند وجود آب است. آب مورد نياز فعاليت ها و مصارف مختلف انسان تابع كيفيت شيميائي خاصي از آب است واستفاده از يك منبع ثابت آب براي تمام مصارف امكان پذير نمي باشد. آبهاي مصرف شده در زندگي روزمره انسان ها به انواع مختلف به منابع اوليه آن باز ميگردند كه ديگر خصوصيات اوليه خود را ندارند بلكه به صورت سيالي است كه انواع مواد از محيط هاي مختلف موارد استفاده به آن اضافه شده است. براي استفاده بهينه از آب ها و براي جلوگيري از اتلاف منابع آبي و استفاده مجدد آن ها، تصفيه آب ها و فاضلاب ها امري ضروري و واجب است. در فرآيند فيزيكي- مكانيكي تصفيه خانه هاي آب و فاضلاب، حوض هاي ته نشيني يا حوض هاي زلال ساز از واحدهاي اصلي تصفيه خانه ها بوده وجداسازي مواد معلق را از اّ ب و فاضلاب ها به عهده دارد.مطالعات متعددي در اين زمينه انجام شده است كه برخي از موارد در زير ارائه ميگردد: شاهرخي ضمن بررسي مختصر انواع حوض هاي ته نشيني و تئوري ته نشيني با ذكر پارامتر هاي طراحي، فلوچارت نرم افزاري ارائه كرده است كه اين نرم افزار مي تواند حوضهاي ته نشيني را به استناد استاندارد هاي متداول جهاني طراحي كرده و سپس مقادير فوق را بر اساس كميت مصالح مورد نياز بهينه نمايد و مقايسه اي بين اين دو مقدار طراحي ارائه دهد .جهت نمونه، حوض هاي طراحي تصفيه خانه هاي فاضلاب تبريز و تهران با اين نرم افزار، بررسي و عدم تطابق نكات طراحي آنها به استناد استاندارد هاي جهاني تشريح كرده است. معمارزاده با هدف بررسي كارائي استفاده از حوضچه هاي ته نشيني متعارف مجهز شده به سيستم لاملا، 1متر طراحي / پايلوت شش گوشه با قطر هيدروليكي 50تا 80ميليمتر و زاويه 60درجه و طول 5و بر روي يك قطاع 15درجه نسبت به مركز( يك سل) ، يكي از حوضچه هاي ته نشين كننده تصفيه خانه آب اصفهان نصب كرده است وكدورت آب ورودي به حوضچه ته نشين كننده نسبت به كدورت آب خروجي از سرريز اين قطاع و قطاع مشابه فاقد سيستم لاملا در همان حوضچه ته نشين كننده ، در طول مدت يك سال و شرايط كاملاً طبيعي و يكسان، با استفاده از نرم افزار SPSSو آزمون آماري ،Tمورد مقايسه قرار داده است. نتايج نشان دهنده برتري عملكرد حذف كدورت در قطاع حوض ته نشيني مجهز شده به سيستم لاملا نسبت به قطاع متعارف حوض ته نشين كننده، مي باشد.
ABSTRACT
In this paper, the motion of particles in sediment ponds is modeled using particle tracing method. In the development of the model, the principles governing the cell division process have been used. In order to perform the above modeling, hydrodynamic parameters of the flow were required. The software was used based on finite volume method. The results of the modeling show that the particles can be detected by particle tracing using the particle trajectory and its results in designing the sedimentation pool and suitable arrangements for collecting or discharging deposited particles at prone areas for prediction and construction Made
INTRODUCTION
The life and development of all human societies requires the existence of water. The water required for different human activities and uses is subject to a specific chemical quality of water, and it is not possible to use a fixed source of water for all uses. The water used in everyday life of humans returns to its original sources in different ways, which does not have its original properties, but rather as a fluid that has been added to various types of materials from different environments. Water and wastewater treatment is essential for optimal use of water and for the prevention of waste and reuse of water resources. In the physical-mechanical process of water and wastewater treatment plants, sediment basins or clearing basins are the main units of wastewater treatment plants and the separation of suspended matter from sewage and sewage. Several studies have been carried out in this area. Some of the following items are presented below: Shahrokhi, along with a brief survey of sedimentary basins and sedimentation theory, has introduced a software flowchart with design parameters, which can provide sediment basins based on the common world standards Then, the above values are optimized based on the required amount of materials and a comparative evaluation With the aim of evaluating the efficiency of using conventional drainage basins equipped with the Lamela system, a 1 meter design / pilot helicopter with a hydraulic diameter of 50 to 80 mm and an angle of 60 degrees and a length of 5 and on a 15-degree angle to the center (one TB), one of Isfahan water bottling ponds have been installed and the water supply to the drainage reservoir is related to the turbidity of the outlet from the overflow of this sector and the same sector without a lamella system in the same drainage basin during one year and completely Natural and the same, using SPSS software and statistical test, T compares. The results show superiority of the turbidity removal function in the sedimentation duct equipped with the lamella system compared to the conventional sedimentary pond.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Reza Ghiasi , Mohammad Matin
File Information: English Language/ 6 Page / size: 722 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : رضا غياثي ، محمد متيني
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 722
نقد و بررسیها
هنوز بررسیای ثبت نشده است.