توضیحات
چکیده
یكي ازمهمترين موضوعاتي كه درمهندسي سازه همواره مطرح بوده است موضوع تعيين جابجايي وتغيير شكل درسازه مي باشد.در حال حاضر در آزمايشگاه هاوهمچنين در پروژه هاي تحقيقاتي و سازه هاي كامل جا بجايي وتغييرشكلها را با استفاده ازانواع حسگر هاي الكترونيكي تعيين میكنند. وجودمحدوديت هاي زياددراستفاده ازاين روشهاكه دربخش هاي بعدي بر شمرده ميشوندباعث گرديده كه محققين بدنبال روشهاي جديدتري دراين زمينه باشند. دراين تحقيق به علم پردازش تصوير بعنوان روشي جديددر تعيين جابجايي پرداخته شده است .در اين مقاله نتايج تستهاي آزمايشگاهي انجام گرفته توسط نويسندگان و مقايسه اين نتايج با روشهاي ديگرارائه ميگردد.اين تحقيق روشي نووجديدرامعرفي مي نمايدكه مي تواندپايه واساسي مناسب براي اين روش در تحقيقات آينده باشد.
مقدمه
همانطور كه مي دانيم يكي از مهمترين پارامترهايي كه در تحليل يك سازه مطرح مي باشد محاسبه تغيير مكان و جابجايي نقاط مختلف در يك سازه است،بگونه اي كه مي توانيم بگوييم با تعيين جابجايي يك نقطه مي توانيم موارد ديگري مانند تنش در آن نقطه را بدست آوريم يا با بيان بهتر جابجايي يك نقطه يك پارامتر مهم در تعيين پارامترهاي ديگر سازه است،بعنوان مثال در تحليل سازه هاي نا معين يكي از روشهايي كه مورد استفاده قرار مي گيرد روش شيب-افت است كه در اين روش با استفاده از تغيير مكان مي توانيم ميزان لنگر ابتدا يا انتهاي يك عضو را بدست آوريم ويا مي توانيم به روش سه لنگري در تحليل سازه هاي نا معين اشاره كنيم كه در اين روش نيز جابجايي يك پارامتر اساسي در تحليل عضو مي باشد. در حال حاضر در آزمايشگاه ها و همچنين در پروژه هاي تحقيقاتي جابجايي و تغيير شكلهارابااستفاده ازانواع حسگر هاي الكترونيكي مانند كرنش سنج ها وانواع تغييرمكان سنج هامانند تغيير مكان سنج مبدل ديفرانسيل متغير خطي(LVDT) تعيين مي كنند.هزينه زيادونيازمندي به تبحر واستخدام نيروهاي متخصص دراين زمينه كاربرد چنين ابزاري را در اكثر موارد توجيه نمي كند. علاوه بر موارد فوق در استفاده ازحسگرهاي الكترونيكي محدوديت كاربرد نيز مشاهده ميشود،بعنوان مثال در دماهاي بالااستفاده از كرنش سنج و LVDTعملاغير ممكن ميباشدو يا اينكه با توجه به محدوديت هايي كه در ابعاد هندسي LVDTداريم درمواردي كه ميزان تغيير مكان زيادي وجودداشته باشداستفاده از LVDTكارساز نيست.
ABSTRACT
One of the most important issues that has always been addressed in the design of the structure is the issue of the displacement and change of shape. Currently, the Hawaiian laboratory also determines the displacement of the structures using the various types of electronic sensors in the research projects and structures. The excessive use of these methods, which are cited in the next sections, has led researchers to look for newer methods in this field. In this research, image processing science is considered as a new method for determining displacement. In this paper, the results of laboratory tests carried out by authors and comparing these results with other methods are presented. This research provides a new method that can be used as a basis for this method in future research. Be
INTRODUCTION
As we know, one of the most important parameters in the analysis of a structure is the calculation of the displacement and displacement of different points in a structure, so that we can say that by determining the displacement of a point, we can obtain other things, such as tensions at that point. For example, in the analysis of unstructured structures, one of the methods used is the slope-drop method, which is used in this method by means of a change of location, in terms of the displacement of a point, is an important parameter in determining other parameters of the structure. We can obtain the level of anchor at the first or the end of a member, or we can use the three-anchor method in the study. Let’s point out some unspecified structures, in which the method of displacement is a fundamental parameter in the analysis of the member. Currently, in laboratories as well as in research projects for the displacement and changing of chips, the use of electronic sensors such as strain gauges and different types of spin gauges determine the variation of the linear variable differential frequency locator (LVDT). The high cost of training and recruiting specialist forces It does not justify the use of such a tool in most cases. In addition to the above, the use of electronic sensors also has application constraints. For example, at high temperatures using the strain gauge and LVDT, it is possible to experiment or, due to limitations in LVDT geometric dimensions, LVDT can not be used in cases where there is a lot of displacement.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Amir Tariyat, Ehsan Dadar
File Information: persian Language/ 7 Page / size: 203 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : امير طريقت، احسان دادار
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 203
نقد و بررسیها
هنوز بررسیای ثبت نشده است.