توضیحات
ABSTRACT
Dynamics is a study of the motion of material bodies and of the associated forces. The study of motion is called kinematics and involves the use of geometry and the concept of time, whereas the study of the forces associated with the motion is called kinetics and involves some abstract reasoning and the proposal of basic ‘laws’ or axioms. Statics is a special case where there is no motion. The combined study of . dynamics and statics forms the science of mechanics.
INTRODUCTION
Initially we shall be concerned with describing the position of a point, and later this will be related to the movement of a real object. The position of a point is defined only in relation to some reference axes. In threedimensional space we require three independent co-ordinates to specify the unique position of a point relative to the chosen set of axes. One-dimensional systems If a point is known to lie on a fixed path – such as a straight line, circle or helix – then only one number is required to locate the point with respect to some arbitrary reference point on the path. This is the system used in road maps, where place B (Fig. 1.1) is said to be 10 km (say) from A along road R. Unless A happens to be the end of road R, we must specify the direction which is to be regarded as positive. This system is often referred to as a path co-ordinate system. Two-dimensionalsystems If a point lies on a surface – such as that of a plane, a cylinder or a sphere – then two numbers are required to specify the position of the point. For a plane surface two systems of co- ordinates are in common use.
چکیده
دینامیک مطالعه ی حرکت بدنهای مادی و نیروهای مرتبط است. مطالعه حرکت به نام سینماتیک نامیده می شود و شامل استفاده از هندسه و مفهوم زمان است، در حالی که مطالعه نیروهای مرتبط با حرکت، سینتیک نامیده می شود و شامل برخی استدلال انتزاعی و پیشنهادی از “قوانین” اساسی است. استاتیک یک مورد خاص است که هیچ حرکتی وجود ندارد. مطالعه ترکیبی از. دینامیک و استاتیک علم مکانیک را تشکیل می دهد.
مقدمه
در ابتدا ما باید توصیف موقعیت یک نقطه، و بعد آن را به حرکت یک شیء واقعی مربوط می شود. موقعیت یک نقطه فقط در ارتباط با برخی از محورهای مرجع تعریف می شود. در فضای سه بعدی ما نیاز به سه هماهنگ مستقل برای تعیین موقعیت منحصر به فرد یک نقطه نسبت به مجموعه ای از محورهای انتخاب شده است. سیستم های یک بعدی اگر نقطه شناخته شده بر روی یک مسیر ثابت قرار بگیرد – مثل یک خط مستقیم، دایره یا اسپلکس – فقط یک عدد برای قرار دادن نقطه با توجه به نقطه مرجع دلخواه در مسیر مورد نیاز است. این سیستم مورد استفاده در نقشه های جاده ای است که در آن مکان B (شکل 1.1) گفته می شود که 10 کیلومتر از A در امتداد جاده R وجود دارد. اگر A اتفاق بی پایان جاده R باشد، باید مسیری را که به عنوان مثبت در نظر گرفته شود. این سیستم اغلب به عنوان یک سیستم هماهنگی مسیر نامیده می شود. سیستم های دو بعدی اگر یک نقطه بر روی یک سطح مانند یک هواپیما، یک سیلندر یا یک کره قرار بگیرد، دو نقطه برای تعیین موقعیت نقطه مورد نیاز است. برای یک سطح هواپیما دو سیستم مختصات در استفاده مشترک هستند.
Year: 1994
Publisher: ELSEVIER
By : R. Harrison and T. Nettleton
File Information: English Language/ 275 Page / size: 16.90 MB
Only site members can download free of charge after registering and adding to the cart
سال : 1373
ناشر : ELSEVIER
کاری از : R. Harrison و T. Nettleton
اطلاعات فایل : زبان انگلیسی / 275 صفحه / حجم : MB 16.90
نقد و بررسیها
هنوز بررسیای ثبت نشده است.