توضیحات
ABSTRACT
This paper analyzes the effects of injecting additional signals in induction machines for the purpose of speed control. A new saturation model able to correctly model the interaction between the added signal and saturation of the motor core due to the main torque-producing flux is presented. The introduction of a variable saturation factor is used to model the variation of the saturation level due to the additional signal. A third harmonic rotor circuit is also introduced to take account of the third harmonic component of the air- gap flux, due to saturation. An additional balanced voltage set is added to the normal supply to analyze the
effects of such signals on a saturated induction motor. Simulation results of such a model both at no load and full load are presented together with experimental measurements.
INTRODUCTION
INJECTION of a high-frequency (hf) signal component into the current command of a voltage-source pulse width modulation (PWM) inverter is presently one of the most heavily studied and analyzed techniques for speed control of induction motors (IMs) without the need for a shaft position or speed sensor (sensorless control). It can be easily demonstrated that the injected hf signal creates additional hf voltage and current harmonics that can be used to obtain the information needed for sensorless control . Among the several techniques proposed, depending on the type of the hf signal injected, it is quite interesting to analyze, in particular, the case where an additional hf symmetrical voltage component vshf is added to the normal stator voltage. In this case, the generated hf magnetic field Fhf, interacting with the main rotating field Fe, produces a periodic variation of the saturation level along the path of the magnetizing flux. In the existing techniques for sensorless control of IM, such an additional field is either rotating at a high angular frequency ωhf or pulsating on the flux axis at an angular frequency ωosc, according to the voltage set injected: rotating if vshf consists of a balanced set, pulsating if vshf is injected only in a phase or consists of three identical voltages.
چکیده
در این مقاله اثرات تزریق سیگنال های اضافی در ماشین های القایی به منظور کنترل سرعت بررسی می شود. یک مدل اشباع جدید قادر به درستی تعامل بین سیگنال اضافه شده و اشباع هسته موتور به علت شار تولید کننده گشتاور اصلی ارائه شده است. معرفی یک عامل متغیر اشباع برای مدل سازی تغییر سطح اشباع به دلیل سیگنال اضافی استفاده می شود. یک مدار سوم هارمونیک روتور نیز برای معرفی سومین جزء هارمونیکی جریان شتاب هوا به دلیل اشباع معرفی شده است. یک مجموعه ولتاژ متوازن اضافی به منبع طبیعی اضافه شده است تا اثرات چنین سیگنال هایی را در یک موتور القایی اشباع تحریک کند. نتایج شبیه سازی چنین مدل هر دو بدون بار و بار کامل همراه با اندازه گیری های تجربی ارائه می شود.
مقدمه
تزریق یک جزء سیگنال فرکانس بالا (HF) به فرمان فعلی یک مبدل پیمایش مدولاسیون پهنای باند (PWM) در حال حاضر یکی از تکنیک های بسیار مورد مطالعه و تحلیلی برای کنترل سرعت موتور القایی (IM) بدون نیاز به برای یک موقعیت شفت یا سنسور سرعت (کنترل سنسور). به راحتی می توان نشان داد که سیگنال تزریقی hf موجب ایجاد ولتاژ اضافی hf و هماهنگی جریان می شود که می تواند برای دستیابی به اطلاعات مورد نیاز برای کنترل بدون حساسیت استفاده شود. در میان تکنیک های پیشنهادی که بسته به نوع سیگنال hf تزریق شده است، بسیار جالب است که به ویژه در مواردی که vshf متناوب ولتاژ متناظر hf به ولتاژ استاتور معمول اضافه می شود، تجزیه و تحلیل شود. در این حالت، میدان مغناطیسی Hf تولید شده Fhf، در ارتباط با میدان مغناطیسی اصلی Fe، تغییرات دوره ای از سطح اشباع را در طول مسیر شار مغناطیسی ایجاد می کند. در تکنیک های موجود برای کنترل حسگر IM، چنین میدان اضافی یا با سرعت فرکانس زاویه ای ωhf چرخش می کند یا در محور flux در فرکانس زاویه ای ωosc، بر اساس ولتاژ تنظیم شده تزریق: چرخش اگر vshf شامل یک مجموعه متعادل ، ضربان قلب اگر vshf تزریق می شود فقط در یک فاز یا شامل سه ولتاژ یکسان است.
Year: 2007
Publisher : IEEE
By : Giovanni Bottiglieri , Alfio Consoli , Thomas A. Lipo
File Information: English Language/ 10 Page / size: 906 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1386
ناشر : IEEE
کاری از : جیووانی Bottiglieri، آلفیو Consoli، توماس A. Lipo
اطلاعات فایل : زبان انگلیسی / 10 صفحه / حجم : KB 906
نقد و بررسیها
هنوز بررسیای ثبت نشده است.