توضیحات
ABSTRACT
The modelling and dynamic analysis of shell and tube heat exchangers will be considered in this contribution. Procedures which incorporate the heat transfer and the fluid flow system properties, for these processes, will be developed. An incremental, energy balance yielding the system, partial differential equations presents the governing process. The multivariable, multi-dimensional, Laplace transformed, distributed parameter formulation of heat exchanger representations, are provided. A frequency domain description of the system model is derived enabling the recovery of Laplace function rationality for both parallel and counter flow heat exchanger models. Suitable feedback control techniques are identified, as a prelude to closed loop design studies. The dynamics, for tubular heat exchangers are computed, for purposes of comparison with alternative response and regulation approaches. A typical application study is outlined.
INTRODUCTION
Heat exchangers are used in many industries where fluid heat transfer is required, see for example Saunders E.A (1). In this operation heat energy is transferred from a hot to a cooler fluid flow stream by a carrier type, energy conversion process, as in Hewitt G et al (2) and Coulson. H. G and Richardson J. (3). This involves coupled fluid flow and thermal interactions where heat is transferred along with the fluid flow through the containing volumes and across the separating, heat exchanger, tube walls. The heating of materials during conveyancing operations would also be equivalent to a carrier flow, heat transfer, percolation process. Continuous conveyor fed food preparation systems and the fluid drainage from the pulp-fibre suspensions, in the paper and board manufacturing industries, as detailed in Smith B.W (4), for example, also comprise percolation, heat and mass transfer processes.
چکیده
تجزیه و تحلیل مدل سازی و پویا مبدل های حرارتی پوسته و لوله در این سهم مورد توجه قرار می گیرد. روش هایی که انتقال حرارت و خواص سیستم جریان سیال را شامل می شوند، برای این فرایندها توسعه می یابد. یک تراز انرژی افزایشی که سیستم را تولید می کند، معادلات دیفرانسیل با مشتقات جزئی، فرایند حاکم را ارائه می دهد. تبدیل چند متغیره، چند بعدی، لاپلاس، پارامتر توزیع پارامترهای مبدل حرارتی ارائه شده است. یک توصیف فرکانس دامنه مدل سیستم به دست می آید که قادر به بازیابی عدالت عملکرد لاپلاس برای مدل های مبدل گرمایی موازی و ضد جریان می باشد. تکنیک های کنترل بازخورد مناسب به عنوان مقدمه ای برای مطالعات طراحی حلقه بسته تعریف شده است. دینامیک برای مبدلهای مبدل حرارتی لوله برای مقاصد مقایسهای با روشهای پاسخ و تنظیم مجدد محاسبه شده است. یک مطالعه کاربردی معمول نشان داده شده است.
مقدمه
مبدلهای حرارتی در بسیاری از صنایع مورد استفاده قرار می گیرند که در آنها انتقال حرارت مایع مورد نیاز است، به عنوان مثال Saunders E.A (1) را ببینید. در این عملیات، انرژی گرما از طریق یک نوع حامل، فرآیند تبدیل انرژی، همانطور که در Hewitt G et al (2) و Coulson، از گرما به جریان جریان مایع سردتر منتقل می شود. H. G و Richardson J. (3). این شامل جریان مایع همراه و تعاملات حرارتی است که در آن گرما همراه با جریان سیال از طریق حجم های حاوی و در سراسر جداسازی، مبدل حرارتی، دیواره های لوله منتقل می شود. گرمایش مواد در حین عملیات انتقال نیز معادل با جریان حامل، انتقال حرارت، فرایند نفوذ می باشد. به عنوان مثال، در ماشین آلات تولید کاغذ و صنایع، مواد شسته و رفته به طور مداوم از سیستم های تهیه غذا و تخلیه مایع از تعلیق های فیبر خلل و فیبر استفاده می شود، به عنوان مثال، همچنین شامل پروکوپس، پروسه انتقال حرارت و جرم است.
Year: 2017
Publisher : ELSEVIER
By : R. Whalley , K.M. Ebrahimi
File Information: English Language/ 30 Page / size: 0.99 MB
سال : 1395
ناشر : ELSEVIER
کاری از : R. Whalley، K.M. ابراهیمی
اطلاعات فایل : زبان انگلیسی / 30 صفحه / حجم : MB 0.99
نقد و بررسیها
هنوز بررسیای ثبت نشده است.