توضیحات
خلاصه
منحنی مشخصه آب_ خاك (SWCC) یکی از مهمترین منحنی هاي کاربردي در مکانیک خاك غیر اشباع است بطوریکه از نظر اهمیت آنرا با منحنی تحکیم در خاك هاي اشباع مقایسه می نمایند. این منحنی که به شکل تابع سیگموید است در حقیقت رابطه بین درصد رطوبت حجمی q (و یا درصد رطوبت وزنی) wبا مکش ماتریک (ua-uw) خاك را مشخص می کند. در مکانیک خاك غیر اشباع از مهمترین کابرد هاي این منحنی تعیین مقاومت برشی و تغییر حجم بوسیله این منحنی می باشد. در این مقاله با بکارگیري یک روش آماري مدلی جهت پیش بینی منحنی مشخصه آب_خاك ارائه شده است. پارامترهاي : تخلخل اولیه ، درصد رطوبت اولیه وزنی ، درصد رس و درصد سیلت به عنوان پارامترهاي 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, 12.8, 25.6, 51.2, 102.4, 204.8, 409.6, ورودي مدل و درصد رطوبت وزنی در مکش هاي 819.2, 1500 kPaبه عنوان خروجی مدل می باشد. جهت تعیین مدل از نرم افزار SPSSاستفاده شده و رابطه بدست آمده بین پارامترهاي ورودي و خروجی در هر مقدار مکش بفرم خطی می باشد. همچنین مجموعه داده هاي استفاده شده در این مدل سازي از بانک اطلاعاتی SoilVisionانتخاب گردیده اند. مقایسه نتایج بدست آمده از این مدل با داده هاي آزمایشگاهی مبین دقت بالاي این روش در پیش بینی منحنی مشخصه آب_ خاك می باشد.
مقدمه
محدود در توجیه رفتار مکانیکی خاك هاي غیر اشباع بر اساس معادلات تنش موثر ، شبیه به آنچه که توسط بیشاب و دولاند(1) پیشنهاد شده منجر به ارائه روشهاي مختلفی براي مدل کردن رفتار این خاك ها شده است. صرفه نظر از روش پذیرفته شده براي مدل کردن رفتار این خاکها ( روش تنش موثر و یا روش وضعیت متغیرهاي غیر وابسته ) ، مکش در این خاکها نقش اساسی را ایفا می کند. از طرفی با توجه به مشکلاتی که در تعیین مستقیم مکش در این خاك ها وجود دارد ، منحنی مشخصه آب- خاك که ارتباط بین تغییرات مکش ( به عنوان مشخصه اي با روش هاي اندازه گیري نه چندان ساده ) با مقدار رطوبت خاك غیر اشباع ( به عنوان مشخصه اي با روش اندازه گیري راحت ) را مشخص می کند پایه اساسی هر مدل سازي در این نوع خاك ها شده است. همچنین این منحنی مشخص کننده ظرفیت ذخیره آب در خاك در مکش هاي مختلف است و از آنجا که اطلاعات مهمی را در مورد مقدار میزان آب در منافذ در مکش هاي مختلف و توزیع اندازه حفرات مطابق با حالت وضعیت تنش در خاك غیر اشباع را در اختیار می گذارد لذا جهت تعیین نفوذپذیري ، مقاومت برشی ، تغییر حجم و قابلیت جذب آب این نوع خاکها مورد استفاده قرار می گیرد.
ABSTACT
The soil-water characteristic curve (SWCC) is one of the most important applied curves in unsaturated soil mechanics, which compares its significance to the consolidation curve in saturated soils. This curve, which is in the form of a sigmoid function, in fact, specifies the relationship between the percentage of volumetric moisture content q (or the percentage of moisture content) w with the mass suction (ua-uw) of the soil. In unsaturated soil mechanics, the most important applications of this curve are determining shear strength and volume variation by this curve. In this paper, a statistical method is used to predict the water-field characteristic curve. Parameters: Primary porosity, initial moisture content, clay percentage and silt percentage as parameters of 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, 12.8, 25.6, 51.2, 102.4, 204.8, 409.6, model input and percentage of moisture content in suction 819.2, 1500 kPa is the output of the model. To determine the model, SPSS software was used and the obtained relationship between the input and output parameters was linear in each suction value. The data sets used in this modeling are also selected from the SoilVision database. Comparing the results obtained from this model with the experimental data indicates the high accuracy of this method in forecasting the water-soil characteristic curve.
INTARODUCTION
Limited to justify the mechanical behavior of unsaturated soils based on effective stress equations, similar to those proposed by Bessel and Dolland (1), have resulted in different methods for modeling the behavior of these soils. In spite of the accepted method for modeling the behavior of these soils (effective stress method or state of non-dependent variables), suction plays an important role in these soils. On the other hand, due to the problems in determining the direct suction in these soils, the water-soil characteristic curve, the relationship between suction changes (as a characteristic with non-softened measurement methods) and the amount of unsaturated soil moisture (to The characteristic characteristic is characterized by a convenient measurement method. The basic basis of each modeling is in this type of soil. It also specifies the water storage capacity in the soil in different suction and because of the important information on the amount of water in the vents in different suction and the distribution of pore sizes in accordance with the state of stress in unsaturated soils Therefore, for determining the permeability, shear strength, volume variation and water absorption capacity of these soils are used.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By :Dr. Ali Javari , Saeed Farrokhnejad , Abbas Jokar
File Information: persian Language/ 8 Page / size: 225 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : دکتر علی جوهري ، سعید فرخ نژاد ، عباس جوکار
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 225
نقد و بررسیها
هنوز بررسیای ثبت نشده است.