توضیحات
چکیده
كاربرد وسيع فروكروم در توليد انواع فولادهـاي آليـاژي باعـث قـرار گـرفتن آن در زمـره فروآلياژهـاي استراتژيك شده است. روند رو به رشد توليد فولادهاي معمولي و آلياژي با درصـد بسـيار كـم كـربن بـه همراه توليد فروكروم پركربن در كشور باعث فراهم شدن بستري مناسب جهت توليد فروكروم كم كـربن در صنعت داخل شده است. در اين تحقيق ابتدا گندله هـاي كـامپوزيتي از مـواد اوليـه تهيـه و در ادامـه بـه ارزيابي درجه تاثيرگذاري عوامل موثر بر فرآيند شامل تركيب اوليه، دما، زمان، خلاء و تاثير فعـالسـازي مكانيكي مخلوط مواد اوليه بر فرآيند توليد فروكـروم كـمكـربن بـه روش احيـاء حالـت جامـد كنسـانتره كروميت با كربن موجود در فروكروم پركربن شركت فارياب پرداخته شده است. بر اساس نتايج به دست آمده از طراحي آزمايشها، تحت شرايط بهينه امكان كاهش محتواي كربن به زير 1درصد وجـود دارد. همچنين دما به عنوان مهمترين عامل تاثيرگذار بر درجه احياء تشخيص داده شده است.
مقدمه
فروكروم، آلياژي از آهن و كروم است كه كاربرد گستردهاي در توليد فولادهاي مخصوص و زنگ نزن دارد و براساس محتواي كربن موجود در آن به سـه دسـته فروكـروم پركـربن بـا 4تـا 10درصـد كـربن، فروكروم كم كربن با 4تا 5/0درصد كربن، فروكروم فوقالعـاده كـمكـربن بـا 0/1تـا 0/5درصـد كـربن تقسيم بندي ميشود . روشهاي متعددي براي توليد فروكروم كمكربن وجود دارنـد كـه از آن جملـه ميتوان به احياء سيليكوترمي كنسانتره كروميت اشاره نمود. البته احياء آلومينوترمي كنسانتره كروميت نيز براي توليد فروكروم كمكربن به صورت محدود مورد استفاده قرار گرفته است امـا بـه دليـل گـران بـودن آلومينيوم و كاهش قيمت فروكروم كمكربن، اين روش در حال حاضر توجيه اقتصادي ندارد. نظر به اينكه عرضه كروميت در جهان عمدتا به صورت نرمه يا و كنسانتره بوده و نميتوان از آنها به طـور مستقيم در كوره قوس الكتريكي استفاده نمود، لذا برنامه هاي گسترده اي براي آگلومراسيون نرمه ها شـامل بريكت سازي، گندله سازي و به نبال آن تحقيقات زيادي مبتني بـر احيـاء گندلـه هـاي كروميـت انجـام و روشهـاي صـنعتي متعـددي توسـعه يافتـه انـد. در همـين راسـتا روش احيـاء حالـت جامـد بـر مبنـاي واكنشهاي حالت جامد ابداع گرديد. در اين روش با مخلوط كردن نرمة فروكروم پركربن با اكسيد آهن و يا كنسانترة كروميت در دماي بالا و تحت خلاء، كربن موجود در فروكـروم پركـربن اكسـيدهاي آهـن وكروم موجود را احياء نموده و فروكروم كمكربن توليد ميشود. بـا توجـه بـه انجـام فرآينـد مـذكور در حالت جامد، كنترل آن نسبت به احيـاء سـيليكوترمي كنسـانتره كروميـت سـاده تـر اسـت.
ABSTRACT
The extensive use of ferrochrome in the production of all types of alloy steels makes it a strategic alloys. The growing trend in the production of conventional and alloyed steels with a very low carbon content along with the production of ferrochromium in the country has provided a good basis for the production of low carbon ferrocarbes in the domestic industry. In this study, composite pellets were prepared from raw materials and then evaluated the degree of influence of factors affecting the process including initial composition, temperature, time, vacuum and the effect of mechanical activation of the raw materials mixture on the process of production of carbon monoxide by fermentation of solid state chromite With carbon in ferrochromium ferrochrome, Faryab Company has been dealt with. Based on the results obtained from the design of the experiments, under optimum conditions, carbon content is reduced below 1%. Also, temperature has been identified as the most important factor affecting the degree of resuscitation.
INTRODUCTION
Ferrochrome is an alloy of iron and chromium, which is widely used in the production of special steels and stainless steel, and based on the carbon content of it, there are three types of carbon monoxide ferrocarbons with 4 to 10 percent carbon, low carbon carbon monoxide, carbon monoxide, carbon monoxide, 0.1 to 0.5 percent carbon is classified. There are several methods for the production of carbon monoxide ferrocarbes, including chromite concentrate silicotromes recovery. However, chromite concentrate aluminotherapy resin has also been used to produce low-carbon ferrochrome, but due to the high cost of aluminum and the low carbon ferrochromium price, this method is currently not economically justified. Since the supply of chromite in the world is mostly finely or concentrate and can not be used directly in an electric arc furnace, extensive programs for agglomeration of fines include bracing, pelletizing, and many researches. Based on the recovery of chromite pellets, several industrial methods have been developed. In this regard, a solid state recovery method based on solid state reactions was invented. In this method, by mixing the ferrochrome ferrochrome with iron oxide or chromite concentrate under high vacuum and under vacuum, the carbon contained in the ferrocarbone can be recovered from carbon monoxide and chromium oxides, and carbon monoxide is produced. Regarding this process in solid state, it is easier to control chromite concentrations than silicone resuscitation.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Abolghasem Ataei, Saeed Heshmati Manesh, Saeed Shibani, Gholamreza Khayati
File Information: persian Language/ 10 Page / size: 126 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : ابوالقاسم عطائي ، سعيد حشمتي منش ،سعيد شيباني ، غلامرضا خياطي
اطلاعات فایل : زبان فارسی / 10صفحه / حجم : KB 126
نقد و بررسیها
هنوز بررسیای ثبت نشده است.