توضیحات
چکیده
روش رایج تولید بردهای چندلایه، استفاده از رزین اپوکسی جهت چسبانیدن لایه های مختلف برد به یکدیگر می باشد. جهت ایجاد چسبندگی بهتر میان لایه های مختلف مسی و چسب اپوکسی، سعی بر افزایش خلل و فرج سطح مس جهت نفوذ بهتر اپوکسی ذوب شده حین فرآیند پرس حرارتی می باشد. محلول های تجاری محدودی با پایه بازی و یا با پایه اسیدی برای این افزایش زبری و خلل و فرج وجود دارد. متاسفانه اعمال تحریم ها و یا شرایط تجارت جهانی در شرایط حساس دسترسی به چنین محلول هایی را دشوار و هزینه بر می سازد. از این رو سعی بر آن است که تاثیر محیط های بازی و اسیدی گوناگون را بر روی سطح ورقه مس غوطه ور شده مطالعه شود تا بتوان راهی مناسب جهت جایگزینی چنین محلول هایی یافت. این گام از پژوهش با عنوان مطالعه مورفولوژی سطح مس در شرایط بازی و اسیدی گوناگون، میباشد که به مطالعه اثر محیط های بازی و محیط های اسیدی بر روی سطوح ورقه های مسی غوطه ور، پرداخته است. در این مطالعات اثر شرایط محیط مانند، عامل اکسیداسیون اسیدی و بازی، غلظت آن، PH و پتانسیل شیمیایی محلول و همچنین زمان غوطه وری مورد مطالعه قرار گرفته است. در نهایت مشخص شده که در هر مورد چه واکنشهایی رخ داده و ویژگی سطح حاصل شده چگونه است. از جمله نتایج مستخرج از این پژوهش این است که، اکسیداسیون ورقه مسی در محیط های غیر خورنده (غالبا محیط های بازی) موجب ایجاد لایه اکسید نفوذناپذیر بر روی سطح مس و در نتیجه عدم دسترسی بیشتر اکسیژن به لایه های درونی تر مس می گردد. لذا چون در غالب محیط های بازی، اکسید مس ایجاد شده بر روی سطح حالت جامد خود را حفظ می کند، موجب افزایش وزن ورقه مسی طی واکنش اکسیداسیون می گردد. در صورتی که ورقه های اکسید شده در محیط های بازی مورد احیاء مجدد قرار گیرند، اختلاف وزن حالت اکسیدی و احیاء شده می تواند ملاک مناسبی جهت تخمین شدت اکسایش سطح مس باشد. اما در محیط های خورنده (مانند محلولهای آبی اسیدها) بسته به نرخ خورندگی سطح توسط محیط و سرعت واکنش اکسیداسیون سطح، رقابتی میان این دو شکل گرفته که نتیجه آن می تواند بجای ماندن سطحی متخلخل و مناسب جهت چسبانیدن و پرس لایه ها باشد.
ABSTRACT
The most commonly used multi-layered production method is the use of epoxy resin to bond the various layers of the board to each other. Better bonding between different layers of copper and epoxy adhesives is an attempt to increase the porosity of the copper surface to better penetrate the melting epoxy during the thermal press process. There are limited commercially available solutions with acid base or base to increase roughness and porosity. Unfortunately, imposing sanctions or conditions of global trade in sensitive situations makes it difficult and costly to access such solutions. Hence, it attempts to study the impact of various gamma and acidic environments on the surface of a dipped copper sheet in order to find a suitable way to replace such solutions. This is a step in the study of the study of the morphology of the surface of copper in various game and acid conditions, which studies the effects of game environments and acidic environments on the surfaces of copper sheets immersed. In these studies, the effects of environmental conditions such as acid oxidation factor and play, its concentration, pH, and soluble chemical potential, as well as immersion time, have been studied. Finally, it is clear that what happens in each case and what the surface-level property is. One of the results of this study is that oxidation of copper sheets in non-corrosive environments (often game environments) creates an impenetrable oxide layer on the surface of the copper, resulting in the lack of more oxygen available to the more inert layers of copper. Therefore, because in most game environments it maintains the copper oxide produced on its solid surface, it increases the weight of copper sheets during the oxidation reaction. If the oxidized sheets are resuscitated in the game environment, the difference in the oxide and resuscitative mass may be a suitable criterion for estimating the oxidation level of the copper. But in corrosive environments (such as aqueous acids), depending on the surface corrosion rate of the environment and the speed of the surface oxidation reaction, a competition between the two is formed, which can result rather than stay porous and suitable for bonding and pressing the layers.
Year: 2017
Publisher : Second National Conference on Knowledge and Technology of Engineering Sciences of Iran
by : Bahador Aboulpour, Parisa Jafari
File Information: Persian Language/ 12 Page / size: 805 MB
Only site members can download free of charge after registering and adding to the cart
سال : 1395
ناشر : دومین کنفرانس ملی دانش و فناوری علوم مهندسی ایران
کاری از : بهادر ابول پور ,پریسا جعفری
اطلاعات فایل : زبان فارسی / 12 صفحه / حجم : MB 805
نقد و بررسیها
هنوز بررسیای ثبت نشده است.