توضیحات
چکیده
در بسياري از كشورهاي صنعتي مشاهده مي شود كه به علت بهسازي لرزه اي مطلوب پل ها با مهاربندهاي تسليم شونده بدون كمانش، بطور گسترده اي از اين سيستم بهسازي استفاده مي شود. لذا، بايستي با انتخاب الگوي فني مناسب و اقتصادي، توليد و ساخت اين نوع از مهاربندها مجدداً مورد بازنگري قرار گيرد. مهاربندهاي بدون كمانشي كه تا كنون توليد شده اند اكثرا به صورتي هستند كه هسته فولادي آنها بطور كامل توسط ژاكت بتني پوشانده ده است(بجز در اتصالات).در اين مقاله با استفاده از حل دقيق آناليز پايداري سازه رابطه حاكم بر اين نوع از مهاربند استنتاج مي شود. با توجه به رابطه بدست آمده، اثر پارامترهاي مختلف طراحي مهاربند تسليم شونده بدون كمانش در تعيين طول محصور شدگي موثر مهاربند بررسي مي شود. در اين بررسي مشخص مي شود كه چه نسبتي از طول كل مهاربندهاي بدون كمانش در حالات مختلف نياز به محصور شدگي دارد.
مقدمه
ايده مهاربندهاي بدون كمانش اولين بار در ۴۰سال پيش مورد تحقيق و بررسي قرار گرفت. Yashinoدر سال ۱۹۷۱صفحات فولادي مسطحي در پانل هاي بتن سلح مورد آزمايش قرار داد، اين سيستم در واقع ديواري برشي بود كه در داخل آن از مهاربند استفاده شده بود با اين تفاوت كه فاصله اي ميان صفحات فولادي و بتن ديوار برشي تعبيه شده بود. Yashinoبه اين نتيجه رسيدكه اين سيستم استهلاك انرژي بسيار بالاتري نسبت به حالتي دارد كه اين فاصله بين فحه فولادي و بتن ديوار برشي وجود نداشته باشد. Wakabayashiدر سال ۱۹۷۳با انجام آزمايشاتي بر روي اين صفحات فولادي نشان داد كه به منظور بالابردن استهلاك انرژي بايستي مابين صفحات فولادي و بتن ديواربرشي از ماده اي غير چسبنده و لزج (debonding material) استفاده كرد. اولين آزمايش بر روي مهاربندهاي فولادي محصور شده در ژاكت فولادي در سال ۱۹۷۶توسط Kimuraبه انجام رسيد. در اين آزمايش، مهاربند فولادي در داخل ژاكت فولادي قرار گرفت به صورتي كه حدفاصل مهاربند و ژاكت توسط ملاتي مخصوص پر شده بود. در اين آزمايش از هيچ گونه ماده لزجي استفاده نشده بود. سرانجام توسط تيمي تحقيقاتي در ژاپن (Watanabeو همكاران) موضوع مواد غير چسبنده و لزج بصورت موئرتري مورد بررسي قرار گرفت.
ABSTRACT
It is observed in many industrialized countries that the widespread use of this system is due to the desired seismic improvement of bridges with non-buckling sinkers. Therefore, by selecting a suitable and economical technical model, the production and construction of this type of bracing should be re-examined. The barefoot braces produced so far are mostly made in such a way that their steel core is completely covered by a concrete jacket (except for joints). In this paper, using a precise solution of the stability analysis of the structure, the governing relationship between this type of inertial bracket it is possible. According to the obtained relationship, the effect of different design parameters of non-buckling sinker bracing is investigated in determining the effective enclosing length of braiding. In this study, it is determined how much of the total length of the braces without buckling in different situations requires confinement.
INTRODUCTION
The idea of bracing without buckling was first investigated 40 years ago. In 1971, Yashino tested flat steel panels in concrete slabs, the system was a shearing wall fitted with curtains, with the difference between the steel plates and the shear wall concrete. Yashino concludes that this system has a much higher energy dissipation than the state that there is no gap between steel sheath and shear wall concrete. Wakabayashi, in 1973, carried out experiments on these steel plates that showed that, in order to increase the energy dissipation, a debonding material should be used between steel plates and wall-mounted concrete. The first experiment was performed on Kimura in 1976, steel braids covered in a steel jacket. In this experiment, a steel braid was placed inside a steel jacket, in which the braid and the jacket were filled with a special mortar. No protrusions were used in this experiment. Finally, the subject matter of the non-sticky and non-stick materials was reviewed by the research team in Japan (Watanabe et al.).
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Pedram Mahmoudi, Hasan Kazemi
File Information: persian Language/ 8 Page / size: 515 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : پدرام محمودي،حسن كاظمي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 515
نقد و بررسیها
هنوز بررسیای ثبت نشده است.