توضیحات
چکیده
در اين مقاله دو تقسيم گر پرتو نوري كريستال فتوني Tشكل با بازده عملكرد بالا معرفي شده اند. اين تقسيم گرها، متشكل از شبكه اي مربعي از ميله هايي از جنس GaAsهستند كه در بستري از هوا قرار گرفته اند. شعاع ميله ها r= /0 18 aدر نظر گرفته شده است و aثابت شبكه مي باشد. دو ساختار تقسيم گر پيشنهاد شده در اين مقاله به ترتيب قابل استفاده در طول موج هاي پر اهميت 1/3و 1/55ميكرومتر مي باشند. نتايج حاصل از شبيه سازي FDTDنشانگر آنست كه تقسيم گرهاي پيشنهادي در اين مقاله قادرند بيش از %90توان نور تابشي را به خروجي هاي ساختار انتقال دهند. ساختاراول كه براي طول موج 1/3ميكرومتر طراحي شده است، %96نور ورودي را در طول موج 1/3ميكرومتر به شاخه هاي خروجي منتقل مي كند. ساختار دوم نيز كه براي طول موج 1/55ميكرومتر كاربرد دارد، قادرست %98نور را در اين طول موج به خروجي انتقال دهد. به عبارت ديگر اين طرح هاي پيشنهادي در مقايسه با ساختارهاي مشابه قبلي داراي بازده تقسيم بالاتر بوده و طيف توان انتقالي آن ها نسبت به نمونه هاي گزارش شده پيشين به مراتب هموارتر است .
مقدمه
كريستال هاي فتوني گونـه اي جديـد از سـازه هـاي نـوري هستند كه در آنها ضريب انكسار به صـورت متنـاوب تغييـر مـي كند. اين سازه ها ابزاري جديد براي جابجايي فتون ها فراهم مي آورند و هم در عرصه ي آكادميك و هم در صنعت توجه زيادي را به خود جلب كرده اند. از ميان ويژگي هاي كريستال هاي فتوني، توانايي آن ها در برهم كنش با نور در يك محدوده ي معين طول موج، امكان ايجـاد سـاختارهاي بـسيار فـشرده را بـراي مـدارات مجتمع نوري تـضمين نمـوده اسـت. تـاكنون قطعـات كـاربردي بسياري كه از كريستال هاي فتوني استفاده مي كننـد، پيـشنهاد شده اند و انتظار مي رود كه در آينده اين قطعات نقش مهمي در مدارات نوري ايفا كنند. در اين مقالـه يكـي از مهـم تـرين ادوات كريستال فتوني يعني تقسيم گر توان پرتو نور مورد بررسي قـرار خواهد گرفت .
ABSTRACT
In this paper, two T-shaped photonic beam beam splitters are introduced with high performance yields. These dividers consist of a square mesh of GaAs rods placed in the air. The radius of the rods is considered to be r = / 0 18 a and a is the network constant. The two proposed structure divisions in this paper are applicable in wavelengths of 1.3 and 1.5 μm, respectively. The results of FDTD simulation indicate that the proposed dividers in this paper can transmit more than 90% of the power of light radiation to the structural outputs. The first structure, designed for a wavelength of 1.3 μm, transmits 96% of the incoming light to a branching output at a wavelength of 1.3 μm. The second structure, used for a wavelength of 55.1 microns, can transmit up to 98% of light at this wavelength to the output. In other words, these proposed designs have higher divide efficiency compared to previous similar structures and their transmission power spectrum is much more smooth than previously reported examples.
INTRODUCTION
Photonic crystals are a new type of optical structure in which the refractive index changes alternately. These structures provide a new tool for the movement of photons, attracting a lot of attention both in academia and in the industry. Among the features of photonic crystals, their ability to interact with light at a certain wavelength range guarantees the creation of very compact structures for the optical complexes. So far, many applications that use photonic crystals have been proposed and are expected to play an important role in light circuits in the future. In this paper, one of the most important photonic crystal devices, namely, the power of light beam, will be investigated.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : shaghayegh foghani, Hassan Katoozian
File Information: persian Language/ 5 Page / size: 523 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : شقايق فوقاني ،حسن كاتوزيان
اطلاعات فایل : زبان فارسی / 5 صفحه / حجم : KB 523
نقد و بررسیها
هنوز بررسیای ثبت نشده است.