توضیحات
چکیده
در کار حاضر روشی جدیدی و سريع برای آشکارسازی مرزدانه های آستنيت اوليه فولاد ESRشده با زیرساختار مارتنزيت بازگشت داده شده مورد استفاده قرار گرفته است. در روش های مرسوم، قبل از متالوگرافی معمولا از روش های کربوره يا نيتروره کردن برای آماده سازی نمونه استفاده میشود، که این توام با صرف هزينه و وقت زياد است. در روش ارايه شده مدت زمان لازم برای آماده سازی به حداقل رسانده شده است. همچنين در بخش ديگر این کار، با متالوگرافی رنگی، فريت بينيت-مارتنزيت موجود در ريزساختار فولاد سه فازی، به ترتيب به رنگهای آبی لاجوردی، قهوه ای روشن و سفيد ظاهر شد. ظهور فازها در رنگهای مختلف به ترکيب شیمیایی فازها مربوط میشود. تغییر مقادیر عناصر آلياژی مانند کربن، سيلسيم و موليبدن در فازها باعث تغييرات رنگ فازها میگردد.
مقدمه
اثر ريزساختار بر خواص مکانيکی و فیزیکی فولادها، موجب شده تا آزمايش ها و مطالعات متالوگرافی و شناسايی فاز برای فهم بهتر خواص، بیشتر مورد توجه قراري گیرد. تا به امروز تکنيک های مختلف متالوگرافی برای شناسايی و مطالعه ريزساختار مورد استفاده قرار گرفته است. در اين میان، متالوگرافی فولاد با استفاده از محلول های شیمیایی اچ، به علت سريع و راحت بودن بيشتر از ساير موارد مورد توجه قرار گرفته است. در این روش از تفاوت پتانسيل الکتروشیمیایی سطوح و فازها نسبت هم به منظور کنترل فرآیند خوردگی، برای ظاهرسازی ريزساختار استفاده میشود. مقدمه ظاهر سازی مرزدانه های آستنیت اوليه در فولاد ESRشده و نيز ظاهرسازی رنگی ريزساختار سه فازی فريت بينيت-مارتنزيت، به طور مجزا از هم در زير آورده میشود. تا به امروزدر فولادهای مارتنزيت بازگشت داده شده، اثر اندازه دانه های آستنيت اوليه بر خواص مکانيکی، الکتريکی و مکانيکی بطور کامل شناخته شده است. بنابراين اندازه گیری اندازه دانه در فولاد از موارد کليدی در مهندسی مرزدانه و مهندسی متالـورژی فولاد به شمـار میرود. با اینکه در استاندارد ASTM-E87تمام ملزومات لازم برای اندازه گیری دانه های آستنيت اوليه اورده شده است.
ABSTRACT
A simple etching procedure with etching solution has been applied to reveal individual micro-structural constituent and prior austenite grain boundaries in a multiphase steel and electro slag re-melted (ESR) steel, respectively. To reveal prior austenite grain boundaries, technique is used, is quick and practical in conventional methods since no metallographic preparation is required after the heat treatment. Due to variation of chemical composition in color tint etching, ferrite, bainite and martensite were observed in azure blue, brown and white colors, respectively. Moreover, color intensity in steel is affected gradually by C, Si and Mo elements.
INTRODUCTION
The effect of microstructure on the mechanical and physical properties of steels has led to the consideration of experiments, metallographic studies, and phase identification to better understand properties. To date, various metallographic techniques have been used to identify and study microstructures. In the meantime, steel metallography using chemical ethanol solutions is more than other considerations due to its rapidity and comfort. In this method, the difference between the electrochemical potential of the surfaces and the phases in order to control the corrosion process is used to visualize the microstructure. Introduction The appearance of the austenite boundary bars in ESR steel, as well as the colorimetric appearance of the three-phase microstructure of binite-martensite ferrite, are presented separately below. To date, it has been reversed in martensite steels, the effect of the size of the austenite grains on mechanical, electrical, and mechanical properties is fully recognized. Therefore, grain size measurement in steel is one of the key issues in the field of steel engineering and metallurgy engineering. Although the ASTM-E87 standard has all the necessary requirements for measuring the initial austenite grains.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Ala Salim Golzani
File Information: persian Language/ 13 Page / size: 1.20 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : عل سالمي گلعذاني
اطلاعات فایل : زبان فارسی / 13 صفحه / حجم : KB 1.20
نقد و بررسیها
هنوز بررسیای ثبت نشده است.