توضیحات
خلاصه
با عنايت به توسعه صنعتي كشور و روند رو به رشد مصرف محصولات فولادي و جايگاه ويژه فولادهـاي ميكروآلياژي، شركت سهامي ذوب آهن اصفهان در راستاي اهداف و استراتژي توسعه محصـولات خـود اقدام به توليد فولادهاي ميكروآلياژي نيوبيوم دار نمودهاست. در اين پژوهش ويژگي هاي ريزساختاري و تأثير پارامترهـاي مختلـف بـر خـواص مكـانيكي آرماتورهـاي ميكروآلياژي نيوبيوم ديتول دار يا ي ن شركت ارزيابي شده اسـت. بررسـي هـاي انجـام شـده نشـان مـيدهـد به كارگيري سردكردن كنترل شده حين نـورد آرماتورهـاي فـولادي نيوبيـوم دار سـبب افـزايش اسـتحكام تسليم اين محصولات تا بالاتر از 500 N/mm2شده است. نتايج حاكي از آن اسـت كـه اسـتفاده از دمـش هوا حين نوردآرماتورهاي ميكروآلياژي حاوي 05/0درصد نيوبيوم استحكام تسليم اين محصـولات را تـا 19درصد نسبت به نمونه هايي كه در شرايط عادي نورد شده اند افزايش داده است. ايـن افـزايش اسـتحكام در مقايسه با نمونه هاي بدون نيوبيوم به مرز 32درصد رسيده است.
مقدمه
كربن به عنوان يك عنصر شيميايي بيشـترين تـأثير را جهـت افـزايش اسـتحكام فولادهـا برعهـده دارد، امـا اثرات نامطلوبي روي ويژگيهاي تكنولوژيكي مانند قابليت جوشكاري و تغييرشـكل دارد. بعـلاوه جهـت دستيابي به استحكام و چقرمگي لازم جهت كاربرد در سازه هـا نيازمنـد پشـت سرگذاشـتن پروسـه هـاي عمليات حرارتي مانند فرايندكوئنچ و تمپر ميباشد كه مستلزم صرف هزينه هاي مـالي و زمـاني اسـت. بنابراين امروزه توليدكنندگان و محققان به دنبال جايگزيني ديگـر مكـانيزم هـاي اسـتحكام بخشـي بـه جـاي استفاده از كربن در توليد فولادهاي با استحكام بالا و با هزينه مناسب هستند. از طرف ديگر طبق تئوري هاي مكانيك شكست، چقرمگي لازم جهت جلوگيري از توسعه ترك بـه طـور نمايي با افزايش اسـتحكام تسـليم افـزايش مـييابـد، بنـابراين فولادهـاي بـا اسـتحكام بـالاتر بـه چقرمگـي مطلوب تري نيازمندند. د ريزكردن دانه ها بيشترين تـأثير را در جهـت بهبود استحكام و چقرمگي مطابق اصل d -1/داراست. اما يكي از راه هاي توليد فولادهاي با استحكام و چقرمگي مطلوب و نيز با قابليت جوشكاري و هزينه مناسـب اسـتفاده از عناصـر ميكروآليـاژي و كنتـرل فرايند نورد است. يكي از مهمترين عناصر ميكروآلياژي مورد استفاده در فولادهاي كمآليـاژ بـا اسـتحكام بالا ،1نيوبيوم است. نيوبيوم از طريق دو مکانیزم اصـلاح دانـه و رسـوب سـختي سـبب افـزايش اسـتحكام فولادها ميشود. در حقيقت نيوبيوم در حين كارگرم بدو صورت سبب ريزشدن ساختار نهـايي مـيگـردد كه ميتوان از آن به تأثير اين عنصر بر استحكام بخشي از طريق مكانيزم اصلاح دانه ياد كرد.
ABSTRACT
Due to the industrial development of the country and the growing trend of consumption of steel products and the specialty of microalloy steel, Zeb-Esfahan Joint Stock Company has been producing niobium alloys in line with the goals and strategy of developing its products. In this study, the microstructural features and the effect of different parameters on the mechanical properties of Ni-Dium alloy microalloy reinforcements or the company have been evaluated. The studies have shown that the use of controlled rolling coil during the rolling of reinforced neuromuscular steel reinforcements increased the yield strength of these products to above 500 N / mm2. The results indicate that the use of air blowing during microalloying rolls containing 0.05% NiBo increased the yield strength of these products by up to 19% compared to those rolled out under normal conditions. This increase in strength has reached 32%, compared to non-Nubian samples.
INTRODUCTION
Carbon as a chemical element has the greatest effect on increasing the strength of steels, but has adverse effects on technological properties such as welding and deformation. In addition, in order to achieve the strength and toughness required for use in structures, it is necessary to undergo heat treatment processes, such as Process Cycle and Temp, which involves only financial and time expenditures. So today, manufacturers and researchers are looking to replace other reinforcement mechanisms instead of using carbon to produce high-strength steels at an affordable cost. On the other hand, according to the failure of the mechanical theory, the toughness required to prevent crack development increases exponentially with increasing sinking strength, so higher-strength steels require better tensile strength. Debrisation has the greatest effect on improving the strength and toughness according to the principle d -1. But one of the ways to produce steels with good strength and toughness, and also with the ability to weld and cost the use of microalloy elements and rolling process control. One of the most important microalloy elements used in low strength alloys is 1N. Niobium increases the strength of the steels through two grain milling and hardening sedimentation mechanisms. In fact, during the work of the Newbie, the structure of the worker is reduced, which can be explained by the effect of this element on the strength of the part through the mechanism of grain reform.
KB 666 :اطلاعات فایل : زبان فارسی / 11 صفحه / حجم
نقد و بررسیها
هنوز بررسیای ثبت نشده است.