توضیحات
چکیده
امروزه استفاده از روش هاي بهينه سازي در مسائل مختلف مهندسي توسعه ي زيادي يافته است. يكي از كاربردهاي روش بهينه سازي، يافتن سطح لغزش بهينه است به طوري كه كمترين ضريب اطمينان را داشته باشد. هدف از اين مقاله استفاده از روش بهينه يابي بيشترين شيب محلي و اصلاح آن جهت يافتن بحراني ترين سطح لغزش در شيب هاي خاكي است. تنش هاي موجود بر روي سطح لغزش با استفاده از روش تعادل حدي محاسبه مي گردد. مقاومت برشي خاك از مدل گسيختگي موهر-كولمب تبعيت مي كند و ضريب اطمينان از تقسيم برآيند نيروهاي برشي مقاوم بر برآيند نيروهاي برشي محرك، روي سطح لغزش مورد نظر بدست مي آيد. روش ارائه شده براي تمام محيط هاي همگن و ناهمگن و خاك با فشار آب منفذي قابل كاربرد است. در نظر گرفتن تاثير زلزله و يا تحليل شبه استاتيكي، مي تواند در ادامه ي اين طرح تحقيقاتي پيشنهاد شود.
مقدمه
هدف از تحليل پايداري شيبها، آن است كه بتوان ضريب اطمينان سطح لغزش مورد نظر را محاسبه كرده، سپس با استفاده از روشهاي موثر، محتمل ترين سطح گسيختگي، كه كمترين ضريب اطمينان را دارد، تعيين كنيم. ها اغلب روشهاي تعادل حدي براي تحليل پايداري شيب ، سطح لغزش را به صورت شكلهاي مشخصي مثل دايرهاي و يا اسپيرال لگاريتمي در نظر ميگيرند. اين اشكال مشخص به منظور سادگي كار و دوري از پيچيدگي هاي سطح لغزش غيره دايراهاي (دلخواه) است. كليه ي روشهايي كه تا به حال براي تعيين بحراني ترين سطح لغزش غير دايره اي ارائه شده است به سه دسته ي كلي تقسيم ميشوندکه عبارتند از: 1-روش عددي حساب تغييرات 2-روشهاي بهينه سازي 3روشهاي توده ي خاكي در اين مقاله هدف آن است كه با استفاده از روش تعادل حدي، ضريب اطمينان را محاسبه كرده، سپس با استفاده از روش بهينه سازي، محتمل ترين سطح گسيختگي كه كمترين ضريب اطمينان را دارد، مشخص نماييم. در اين مقاله روش جانبو براي محاسبه ي ضريب اطمينان انتخاب ميگردد و روش اصلاح شده ي بيشترين شيب محلي براي يافتن محتمل ترين سطح گسيختگي استفاده خواهد شد. روش ارائه شده براي محيط هاي همگن و ناهمگن، خاكهاي چند لايه وخاك با فشار آب منفذي قابل كاربرد است. سابقه ي تحليل پايداري شيب ها با استفاده از روش هاي تعادل حدي به بيش از 80سال مي رسد كه از آن جمله مي توان به روش هاي فلنيوس، بيشاپ، جانبو، پرايس و مرگنشترن اشاره كرد.
ABSTRACT
Today, the use of optimization methods in various engineering issues has been developed. One of the applications of the optimization method is to find the slip surface optimally, so that it has the lowest coefficient of confidence. The purpose of this paper is to use the optimization method of the most local slope and to correct the most critical slip surface in the slopes. The stresses on the slip surface are calculated using the equilibrium equation method. The shear strength of the soil follows the Mohr-Coulomb rupture model, and the coefficient of reliability is obtained by dividing the shear forces against the yield of shear forces of the actuator on the desired slip surface. The proposed method is applicable to all homogeneous and heterogeneous and soil environments with pore water pressure. Considering the effects of an earthquake or quasi-static analysis can be suggested further in this research project.
INTRODUCTION
The aim of the slope stability analysis is to determine the confidence level of the slip surface, and then, using effective methods, determine the most probable level of fracture, which has the lowest coefficient of confidence. Most limiting equations for slope stability analysis consider the slip surface as specific shapes such as circular or spiral logarithms. These are specific shapes for simplicity of work and avoiding the complexity of the slip surface, etc., of circuits (arbitrary). All of the methods that have been presented to determine the most critical non-circular slip surface are divided into three general categories: 1-Numerical Chart of Changes 2-Optimization Methods 3 Soil Mass Methods In this paper, the aim is to Using the equilibrium equilibrium method, we calculate the confidence coefficient, and then, using the optimization method, we determine the most probable level of failure that has the lowest coefficient of confidence. In this paper, Janbo’s method is used to calculate the confidence coefficient. The modified method of the most local slope will be used to find the most likely level of fracture. The proposed method is applicable to homogeneous and heterogeneous environments, multilayer soils and porous water pressure. The history of the stability analysis of slopes is achieved by applying equilibrium methods to more than 80 years, including the methods of Flennius, Bishop, Janobu, Princess and Deathless.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohammad Haji Azizi
File Information: persian Language/ 8 Page / size: 170 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محمد حاجي عزيزي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 170
نقد و بررسیها
هنوز بررسیای ثبت نشده است.