توضیحات
چکیده
در صنعت نفت و گاز چندین دهه می باشد که اطلاعات مورد نیاز معادلات (مشخصه های مخزن) که از جمله فشار اولیه و تراوایی همچنین آسیب سازند می باشد، توسط تست چاه آزمایی بدست می آید. به بررسی یکی از تست های جدید با نام اختصاری Perforation Inflow Test ( PITA )Analysisمی پردازیم. این تست با استفاده از داده های جریانی ابتدایی و داده های جریان پایانی (early- late time) مقدار فشار اولیه، تراوایی و آسیب سازند (پوسته) را با تخمین بدست می آورد. مقدمه تست های کوتاه به عللی چون اقتصاد، محیط زیست و زمانی کوتاه تر اخیرا مورد توجه قرار گرفته اند. تست PITAبرای تخمین فشار اولیه مخزن، تراوایی و آسیب سازند بلافاصله بعد از مشبک کاری چاه انجام می شود. تست چاه آزمایی دقت بالایی دارد و مقادیر بدست آمده قابل اطمینان است. نکته منفی در تست چاه آزمایی ابتدا آنست که مدت زمان انجام تست طولانی می باشد، ضمنا صرف نظر از هزینه این آزمایش، چاه آزمایی برای محیط زیست نیز خطرناک است. اخیرا توجه صنعت نفت به تست هایی که با زمان کوتاه تر، آسیب کمتر به محیط زیست و هزینه کمتر اطلاعات مورد نیاز از مخزن را با خطایی قابل قبول بدست آورد، معطوف شده است. این تستها از آنجا که برای محیط زیست مشکل ساز نیستند، به تست های سبز مشهور شده اند. درصد خطا دستاورد این تست بیش از چاه آزمایی است. مقدار تخمین گرچه دقت چاه آزمایی را دارا نیست، اما قابل قبول است. با این وجود نکته مهم این است که درصورت نویزی بودن داده ها تخمین مقادیر مشخصه های مخزن دقیقتر از چاه آزمایی خواهد بود .
ABSTRACT
In the oil and gas industry for decades, the information required for the equations (reservoir characteristics), including initial pressure and permeability, is also obtained by well testing. We review one of the new tests, called Perforation Inflow Test (PITA) Analysis. This test obtains the estimated initial pressure, permeability and damage (shell) using initial flow data and early-late-time data. Introduction Short tests have recently been considered for reasons such as economics, the environment and shorter time periods. The PITA test is performed to estimate the initial pressure of the reservoir, permeation and damage immediately after the wellbore. The well testing test is highly accurate and the values obtained are reliable. The negative point in the well test is, first, that the duration of the test is long, at the same time, irrespective of the cost of this test, well testing for the environment is also dangerous. Recently, the oil industry has focused on testing with shorter time, less damage to the environment, and less costly revenues from the reservoir with an acceptable error. These tests are known as green tests because they are not problematic for the environment. The error rate is the result of this test more than well testing. The estimated value, although not accurate, is acceptable. However, the important thing is that in the case of the data being inaccurate, estimates of reservoir values will be more accurate than wells.
Year: 2017
Publisher : National Congress of Chemistry and Nanoscience, from Research to National Development
By : Mohammad Amir Heidari, Mahsa Khodakarami
File Information: persian Language/ 10 Page / size: 551 KB
سال :1396
ناشر : کنگره ملی شیمی و نانوشیمی,از پژوهش تا توسعه ملی
کاری از : محمد امیر حیدری، ,مهسا خداکرمی
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 551
نقد و بررسیها
هنوز بررسیای ثبت نشده است.