توضیحات
چکیده
فعالیت ارتجاعی سیستم هاي برون محور، تحت بارگذاری هاي تکراري محدود به تیر پیوند میباشد. فعالیت ارتجاعی سیستم هاي برون محور، به گونه اي طراحی میشود که سازه قادر به تحمل تغییرشکل هاي ارتجاعی بزرگ بدون کاهش مقاومت باشد بنابراین طراحی مناسب این عضو از اهمیت خاصی برخوردار بوده چرا که اگر آن را بسیار قوي طراحی نمایند، سازه در محدوده الاستیک قرار میگیرد و اگر ضعیف طراحی شود، سازه از ختی مطلوبی برخوردار نمیباشد. به منظور بررسی عملکرد لرزهاي مطلب فوق، تعدادي مدل نرم افزاري که تحت آنالیز استاتیکی غیرخطی قرار گرفته مورد بحث و بررسی قرار میگیرد بطوریکه پس از ترسیم منحنی هاي تغییرمکان-نیرو، به ارزیابی عملکرد ارتجاعی آنان پرداخته، می شود.
مقدمه
همواره تناسب مناسب پارامترهاي سختی و شکلپذیري، دغدغه اصلی مهندسین طراح بوده است، چرا که جهت طراحی یا باید افزایش سختی الاستیک طبقات را که علاوه بر اقتصادي نبودن طرح و قبول صدمات غیرسازهاي مد نظر قرار دهند یا با محدود کردن سختی الاستیک و افزایش شکل پذیري، مقداري از تخریب سازه را قبول نمایند. در این بین عملکرد لرزهاي بادبندهاي برونمحور نسبت به سایر سیستم هاي مقاوم لرزه اي به دلیل رابطه مناسب، سختی و شکل پذیري از مقبولیت خاصی برخوردار بوده است. فعالیت ارتجاعی سیستم هاي برون محور، تحت بارگذاریهاي تکراري به تیر پیوند محدود میشود. تیر پیوند در این سیستمها به گونهاي طراحی میشود که سازه قادر به تحمل تغییرشکلهاي ارتجاعی بزرگ بدون کاهش مقاومت باشد. با توجه به این نکته که این تیرها، نظیر فیوزهاي شکلپذیر عمل و انرژي زلزله را با رفتار مناسب خود جذب مینمایند و همچنین به عنوان یک عضو حیاتی در رفتار ارتجاعی بادبندهاي واگرا مطرح میباشند، طراحی این عضو از اهمیت خاصی برخوردار میباشد چرا که اگر این پیوندها را بسیار قوي طراحی نمایند، سازه قادر به پاسخگویی مناسب در برابر بارهاي جانبی نخواهد بود و در نتیجه سازه در محدوده الاستیک قرار میگیرد و اگر ضعیف طراحی شوند سازه از سختی مطلوبی برخوردار نمیباشد. بدین منظور میبایست سازه در برابر زلزله صورت غیرخطی بررسی شود و سپس تغییرمکانها، محل تشکیل مفاصل پلاستیک و نحوه توزیع آنها مشخص گردد.
ABSTRACT
The reactive activity of off-axis systems is limited to reciprocating loads. The elastic activity of the exogenous systems is designed in such a way that the structure is able to withstand large elastic deformations without reducing the strength, so the proper design of this member is of particular importance because if it is very strong, the structure is in the elastic range And if it is poorly designed, the structure is not very good. In order to investigate the seismic performance of the above article, a number of software models that are under static nonlinear analysis are discussed so that, after plotting the displacement-force curves, they are evaluated for their elastic performance.
INTRODUCTION
The proper fitting of hardness and formability parameters has been a major concern for the design engineers, because designing or increasing the stiffness of the elastic floors, which, in addition to the non-economics of the design and the acceptance of non-composite injuries, should be considered, or by limiting the elastic hardness and increasing the ductility , Will accept some of the destruction of the structure. In the meantime, the performance of seismic exhaust bracing has been particularly well-accepted in comparison with other seismic resistant systems because of its proper relationship, hardness and ductility. The elastic activity of off-axis systems is limited by repeated loading to the link beam. The beam joints are designed in such systems that the structure is able to withstand a large elastic deformation without loss of resistance. Considering the fact that these beams, such as actionable fuses, and earthquake energy are attracted to their proper behavior, as well as a vital member of the elastic behavior of divergent braces, the design of this member is of particular importance because if this The structure is not capable of adequately responding to lateral loads, and as a result the structure is placed in the elastic range, and if it is poorly designed, the structure does not have the desired hardness. For this purpose, a nonlinear face-to-face earthquake structure should be investigated and then the displacement, location of the plastic joints and their distribution patterns should be determined.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Reza Jalal Kamali, Peyman Test, Ehsan Adeli, Mohammad Hossein Hesami Kermani
File Information: persian Language/ 7 Page / size: 262 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : رضا جلال کمالی ، پیمان آزمون ، احسان عدیلی ، محمد حسین حسامی کرمانی
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 262
نقد و بررسیها
هنوز بررسیای ثبت نشده است.