توضیحات
چکیده
در اين تحقيق روش رسوب الكتريكي براي ايجاد پوشش همزمان بايو سراميك هيدروكسي آپاتيت و ذرات پليمري پلي تترافلوئور اتيلن استفاده شد. ابتداء قبل از اعمال پوشش هيدروكسي آپاتيت عمليات آماده سازي سطح تيتانيوم پوليش انجام گرديد. سپس شرايط بهينه براي اعمال پوشش رسوب الكتريكي هيدروكسي آپاتيت مورد مطالعه قرار گرفت. اعمال پوشش كامپوزيتي هيدروكسي آپاتيت همراه با ذرات پليمري از نمكهاي كلسيم و فسفات از الكتروليت آبي همراه با فعال ساز سطحي PDDA و CTABبه مقدار مشخص بطور جداگانه در شرايط بهينه اعمال پوشش هيدروكسي آپاتيت صورت گرفت. همچنين بررسي هاي فوق در مخلوط محيط آب- اتانول و اتانول انجام شد و نتايج بدست آمده در هر دو حالت حضور ذرات پليمري را در پوشش هيدروكسي آپاتيت بر روي تيتانيوم تائيد نكرد.
مقدمه
فلزات هنوز بعنوان بيومواد در صد بالائي از كاربرد هاي پزشكي را به خود اختصاص مي دهند. زيرا آنها داراي خواص مكانيكي مطلوب نظير استحكام، قاومت به خمش، مقاومت به ضربه مي باشند. به همين دليل براي كاربرد در موارد تحت بار همانند محل اتصالات از اهميت بالايي برخوردار هستند. از بين فلزات، فلز تيتانيوم و آلياژهاي آن در كاربردهاي پزشكي و دندان پزشكي بيشترين كاربرد را دارند. با اين وجود، عليرغم داشتن خواص مكانيكي مطلوب، از خاصيت قابليت تكثير و رشد استخوان ضعيفي بر روي خود بر خوردار مي باشند. محدوديت فوق در آلياژهاي تيتانيوم در سالهاي اخير با اعمال پوشش بايوسراميكي كه قابليت تكثير و رشد استخوان بالائي دارد، مورد بررسي قرار گرفته است. لايه بيوسراميكي ايجاد شده بر روي سطح تيتانيوم از اجزاء و تركيب اصلي استخوان محسوب مي شود. بنابراين رشد و علاقه فزاينده اي در جهت كاهش زمان رشد استخوان بر روي بيومواد تيتانيومي و در نتيجه كاهش عوارض جانبي ناشي از كاشت بيومواد در ذهن محققين و پژوهشگران بوجود آمده است. در اين راستا تحقيقات در اين زمينه به سمت و سوي اعمال پوشش هيدروكسي آپاتيت بر روي سطح مواد كاشتي تيتانيومي در سه دهه اخير متمركز شده و فرآيند هاي اعمال پوشش نظير پاشش پلاسماي، اسپاترينگ، غوطه وري و يا سل-ژل، تحرك ذرات هيدروكسي آپاتيت توسط ميدان الكتريكي و يا الكتروفوروتيك و رسوب الكتروشيميائي براي ايجاد پوشش هيدروكسي آپاتيت بر روي تيتانيوم پيشنهاد و ارائه شده اند.
ABSTRACT
In this study, an electrodeposition method was used to create a synthetic coated ceramic hydroxyapatite coating and polymer polyethylene terephthalene ethylene particles. First, before applying the hydroxyapatite coating, the preparation of the surface of titanium polisher was performed. Then, optimal conditions for the application of electrolytic deposition of hydroxyapatite were studied. Applying composite coating of hydroxyapatite with polymer particles from calcium and phosphate salts of hydrolytic electrolyte with surface activator PDDA and CTAB in a specified amount were performed under optimal conditions of application of hydroxyapatite coating. Also, the above-mentioned studies were carried out in a mixture of water-ethanol and ethanol, and the results did not confirm the presence of polymer particles in the coating of hydroxyapatite on titanium in both cases.
INTRODUCTION
Metals still account for a high percentage of medical applications as biomaterials. Because they have the desired mechanical properties such as strength, bending strength, impact resistance. For this reason, they are very important for use in under load conditions, such as connections. Among metals, titanium metal and its alloys are most widely used in medical and dental applications. However, in spite of having the desired mechanical properties, they have the ability to propagate and grow weak bones on their own. The above limitation in titanium alloys has been investigated in recent years by applying biomechanical coatings that have high bone proliferation and growth. The biosorbent layer formed on the surface of the titanium is a component of the original bone composition. Therefore, growing interest and interest in reducing the bone growth time on titanium biomaterials and consequently reducing the adverse effects of biomaterials have been created in the minds of researchers and researchers. In this regard, research in this field focused on the application of hydroxyapatite coating on the surface of titanium plant materials in the last three decades, and coating processes such as plasma spraying, sputtering, immersion or sol-gel, the mobility of hydroxyapatite particles It is proposed by the electric field or electrophoretic and electrochemical sedimentation to create a hydroxyapatite coating on titanium.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Man Ali Yousefpour, Abdollah Afshar, Jian Chen
File Information: persian Language/ 11 Page / size: 321 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مرد علي يوسف پور ،عبداله افشار ،جيونگ چن
اطلاعات فایل : زبان فارسی / 11صفحه / حجم : KB 321
نقد و بررسیها
هنوز بررسیای ثبت نشده است.