توضیحات
چکیده
در اين تحقيق اثر غلظت يون مس در محدوده ي 35-5 gr/lit روي پودر مس تهيه شده به روش الكتروليزي بررسي شده است. كه در ارائه يا جداگانه شرايط هينه در سلول الكتروليز همانند دانسيته جريان كاتدي،دما و بازده زماني برداشت پودر براي دسترسي به پودرمطللوب بررسي شده است.ميكروساختار پودرها توسط آناليز SEMانجام گرفت،همچنين توزيع اندازه دانه و دانسيته ظاهري پودرهاي رسوب داده شده تحت شرايط مختلف اندازه گيري شد.نتايج بدست آمده بيانگر اين است كه غلظت يون مس روي رشد دندريتي مس رسوب شده و اندازه دانه و دانسيته ظاهري آن تاثير مي گذارد. نتايج EDXو XRDنيز خلوص بالائي را براي پودر رسوب داده شده نشان مي دهد.
مقدمه
متالورژي پودر در تعريفي ساده فرم دهي فلزات از طريق شکل دهي پودر فلزي در داخل قالب بهمراه پرس سپس تف جوشي آن از طريق اعمال حرارت به قطعه خام مي باشد.اين تحقيق تلاشي براي استحصال پودر مس به روش الكتروليتي به عنوان روشي كه هم خلوص بالا وهم خواص مطلوب را دارد مدنظر قرار گرفت و ازطرفي اولين مرحله فرايند متالورژي پودر مي باشد. پودر به ذرات جامد بسيار ريز كه بزرگترين بعد شان كمتر از 1mmباشد،معرفي مي شوندكه اندازه دانه هاي پودري معمولا در محدوده 200-25 µmمي باشد. عموماً متالورژي پودر مربوط به پودرهايي در رنج بالاتر از اندازه دانهµm (0.01 −1) و كمتر از محدوده ( 0.1 −1)mm می شود كه خيلي از پودرهاي فلزي در محدوده (25 − 200µm) توليد مي شوند. امروزه پودرهاي فلزي در كميت هاي بالا توليد مي شوند و روش هاي مختلف جهت توليد آن وجود دارد از جمله: الکتروليز،افشانش،مکانیکي،احیاء و… که روش الكتروليزي سهم مهمي از اين توليدات را در بر دارد . روشهاي الكتروليتي توليد پودر اجازه توليد محصولي با خلوص بالا كه به خوبي پرس و زينتر ميشود را مي دهد . بعلاوه در سالهاي اخير نشان داده شده است كه امكان اسحتصال پودري با رنج وسيع خواص ونيز پيش بيني خواص پودري مورد نظر كه اهميت بالايي دارند،به اين روش امكان پذير است. در کشور ما به لحاظ استقبال از روش هاي قطعه سازي متالورژي پودر،توليد پودر فلزي از گسترش قابل توجهي برخوردار نبوده که روش الکتروليزي نيز همين شرايط را به طبع خواهد داشت.
ABSTRACT
In this research, the effect of copper ion concentration in the range of 35-5 gr / lit on copper powder prepared by electrolysis method was investigated. It was investigated in separate or separate conditions for electrolysis cells such as cathodic flow density, temperature and pulp yield for access to powdered powder. The microstructure of the powder was performed by SEM analysis, as well as the distribution of the grain size and apparent density of the deposited powders under different conditions The results showed that the copper ion concentration was deposited on the dendritic growth of copper and its grain size and apparent density were affected. The EDX and XRD results also show a high purity for the precipitated powder.
INTRODUCTION
Powder metallurgy is a simple definition of metal forming by forming a metal powder inside the mold with a press and then spitting it through heat to the raw material. This research is an attempt to extract copper powder by electrolyte method as a method of high purity Both the desired properties are considered and the first step is the metallurgical process of powder. The powder is introduced into very fine solid particles, the largest dimension of which is less than 1mm, which is usually in the range of 200-25 μm in powder size. Generally, powder metallurgy is related to powders above the grain size μm (0.01-1) and less than (0.1-1 mm) range, with many metal powders being produced in the range of (25-200 μm). Today, metal powders are produced in high quantities and there are various methods for its production, including: electrolysis, sputtering, mechanical, resuscitation, etc. Electrolysis is an important part of these products. Electrolytic production of powder allows the production of a high purity product that is well pressed and sealed. In recent years, it has also been shown that the possibility of powder coating with a wide range of properties, and the prediction of powder properties that are of high importance, is possible in this way. In our country, in terms of powder metallurgy, metal powder production is not widely available, and the electrolysis method will have the same effect.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Ebrahim Akbarzadeh, Maryam Eteksamzadeh, Mohsen Khazeripour, Shahram Danesh Pajooh
File Information: persian Language/ 10 Page / size: 916 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : ابراهيم اکبرزاده،مريم احتشام زاده، محسن خضري پور ، شهرام دانش پژوه
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 916
نقد و بررسیها
هنوز بررسیای ثبت نشده است.