توضیحات
چکیده
در اين مقاله، رفتار ساختمان هاي فولادي با مهاربند همگرا كه در پايه بوسيله ي جداگرهاي لاستيكي – سربي، جداسازي گرديده اند، بررسي مي شود. براي انجام تحليل تاريخچه زماني غيرخطي، هفت زمين لرزه ي ثبت شده بكار رفته و تغييرات شتاب مطلق بام، تغييرمكان جداگر، برش پايه و تغييرمكان نسبي بين طبقه اي تحت عواملي مانند تغيير در ارتفاع ساختمان، دوره تناوب جداساز و مقاومت مشخصه ي جداگر بررسي مي شود. نتايج، بيانگر رفتار مشابه اينگونه سازه ها با ساير سيستم هاي باربر جانبي مي باشد. مقداري در حدود % 10براي نسبت مقاومت مشخصه ي جداگر به وزن كل ساختمان بدست آمده است كه تغييرمكان جداگر را به حداقل مي رساند.
مقدمه
روش هاي متداول طراحي سازه ها، بر ايده ي افزايش ظرفيت مقاومت سازه ها در برابر زلزله(تأمين سختي و مقاومت لازم در تحمل بارهاي قائم و جانبي در محدوده ي مجاز تغييرشكل) استوار است. به رغم پيشرفت هايي كه در توليد مصالح ساختماني با مقامت زياد و وزن كم صورت پذيرفته، افزودن سختي سازه ممكن است مستلزم هزينه هاي زيادي باشد؛ علاوه بر اين، چنين روش هايي منجر به افزايش شتاب طبقات و يا تغييرمكان نسبي بين طبقه اي مي گردد. براي كاهش خسارات غير سازه اي، دو فلسفه ي طراحي وجود دارد. اولين فلسفه بيان مي دارد كه ساختمان هاي سخت مناسب ترند؛ اين ساختمان ها ضمن كاهش تغييرمكان نسبي بين طبقه اي، شتاب هاي قابل توجهي در طبقات توليد مي كنند كه در نتيجه ي آن، نيروهاي لرزه اي وارد بر طبقات فزوني مي يابند. فلسفه ي دوم، ساختمان هاي نرم را برتر مي داند و استدلال اين است كه چنين ساختمان هايي به علت جذب نيروي كمتر، شتاب طبقات را كاهش مي دهند؛ اما اين روش، افزايش تغييرمكان هاي نسبي بين طبقه اي را در پي خواهد داشت. جداسازي لرزه اي كه بعنوان يك روش كنترل غيرفعال سازه ها شناخته مي شود، قادر است تعادلي بين دو فلسفه ي مطرح شده بوجود آورد. مبناي نظريه ي جداسازي لرزه اي عبارتست از ايجاد انعطاف پذيري در پايه سازه در صفحه ي افقي(نصب تكيه گاه هايي با سختي افقي نسبتاً پايين، اما سختي قائم بالا) و همزمان با آن، ايجاد عناصر مستهلك كننده به منظور جذب كامل و يا بخش عمده اي از انرژي ناشي از زمين لرزه. با استفاده از جداسازي لرزه اي، دوره تناوب اصلي سازه افزايش يافته و به محدوده ي ضعيف طيف انتقال داده مي شود؛ البته اين افزايش دوره تناوب، به افزايش تغييرمكان جانبي سازه و جداگر مي انجامد.
ABSTRACT
In this paper, the behavior of steel constructions with converging braid, which are separated on the base by rubber-lead separators, is investigated. To analyze the nonlinear time history, seven recorded earthquakes were used and the changes in absolute acceleration of the roof, separator change, base cutting, and interchanging relative displacement were investigated under factors such as changes in the height of the building, the separation period, and the separation characteristic resistance. To be The results show similar behavior of these structures with other lateral load systems. A value of about 10% is obtained for the ratio of separator characteristic to total building weights, which minimizes the displacement of the separator.
INTRODUCTION
The conventional methods of designing structures are based on the idea of increasing the strength of structures against earthquakes (providing the hardness and strength required to withstand vertical and lateral loads within a permissible shifting structure). Despite the advances made in the production of high-quality and low-grade building materials, the addition of structural stiffness may involve a lot of costs; in addition, such methods lead to an increase in class acceleration or relative relative interchanges . To reduce non-structural damage, there are two design philosophies. The first philosophy states that hard buildings are more appropriate; these buildings, while reducing the relative inter-class variation, produce significant accelerations in the classes, which results in seismic forces entering higher classes. The second philosophy is superior to soft buildings, and the argument is that such buildings, due to less power absorption, reduce the acceleration of classes, but this method will result in an increase in inter-class relative interchanges. Seismic separation, known as a passive control of structures, can provide an equilibrium between the two proposed philosophies. The basis of the seismic separation theory is to create flexibility in the base of the structure in the horizontal plane (installing the supports with a relatively low horizontal stiffness but high vertical stiffness) and, at the same time, creating depreciating elements for the purpose of full absorption or section Majority of earthquake-induced energy. Using seismic separation, the principal period of the structure increases and is transferred to the weak range of the spectrum; however, this increase in periodicity leads to an increase in the lateral displacement of the structure and separator.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohsen Shayanfar, Hossein Steari
File Information: persian Language/ 8 Page / size: 662 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محسنعلي شايانفر ،حسين استيري
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 662
نقد و بررسیها
هنوز بررسیای ثبت نشده است.