توضیحات
خلاصه
دیوارهاي برشی فولادي از جمله سیستم هاي نوین در سازه هاي بلند مرتبه و ساختمان هاي با اهمیت زیاد می باشد. این نوع سیستم سازه اي در بیشتر مناطق لرزه خیز از جمله ژاپن، آمریکا، کانادا و مکزیک بکار گرفته شده است و در دو نوع سخت شده و سخت نشده استفاده میشود. دیوارهاي برشی فولادي داراي مزایاي بسیار زیادي نسبت به سیستم هاي مشابه مقاوم در برابر بارهاي جانبی می باشد بطوریکه داراي ظرفیت باربري، اتلاف انرژي، سختی و شکل پذیري زیادي می باشد و همچنین باعث کاهش وزن سازه و کاهش نیروهاي ناشی از زلزله به سازه می گردد. دیوارهاي برشی فولادي سخت نشده داراي هزینه اجرایی کمتري نسبت به دیوارهاي سخت شده بوده و استفاده از این نوع دیوارها نیز در دنیا متداولتر می باشد. یکی از نوآوري هاي که در این نوع دیوارها در چند سال اخیر بکار رفته است، استفاده از ورق هاي موجدار به جاي ورق هاي ساده می باشد. اولین کاربرد این نوع از ورق ها در جان تیر ورق ها بوده است و در سالهاي اخیر آزمایش هاي متعددي بر روي دیوارهاي برشی فولادي با ورق هاي موجدار انجام شده است. با توجه به جدید بودن این نوع ورق ها در سیستم دیوارهاي برشی فولادي، در این مقاله به بررسی اثر میزان تراکم موج هاي این ورق ها بر رفتار قاب متشکل از آن پرداخته شده است. نتایج این مقاله بر اساس روش اجزاي محدود و با استفاده از نرم افزار ANSYSحاصل شده است. نتایج حاصل از این بررسی نشان داده است که با افزایش پارامتر میزان تراکم موج ها اولاً سختی سیستم افزایش یافته ثانیاً میزان ظرفیت باربري و اتلاف انرژي نیز روند صعودي داشته است.
مقدمه
دیوارهاي هاي برشی فولادي در حدود سه دهه اخیر در بیشتر کشورهاي پیشرفته و لرزه خیز از جمله آمریکا، ژاپن، کانادا در ساخت سازه هاي بلند مرتبه استفاده می شود. این سیستم داراي مزایاي بسیار مناسبی نسبت به دیگر سیستم هاي مشابه مانند دیوار برشی بتنی و مهاربندهاي فولادي میباشد. از جمله مزایاي این سیستم ظرفیت باربري بالا، شکل پذیري مناسب، ظرفیت جذب انرژي بالا، سختی مناسب، کاهش وزن سازه و کاهش هزینه هاي ساخت فونداسیون، کیفیت بهتر و سرعت ساخت بالا اشاره نمود. ساختار کلی دیوارهاي برشی فولادي عبارتست از اعضاي محیطی شامل تیر و ستون ها و صفحات پرکننده فولادي در فضاي بین آنها. دیوارهاي برشی فولادي در دو نوع می باشند، نوع اول دیوارهاي برشی ساده یا سخت نشده و نوع دوم دیوارهاي برشی فولادي سخت شده. این سیستم ها از لحاظ عملکردي مشابه تیر ورق ها می باشند بطوریکه در این سیستم، ستونها نقش بال تیر ورق، ورق فولادي به عنوان جان آن و تیر هاي عرضی مانند سخت کننده هاي موجود در جان تیرورق عمل می نمایند.
ABSTRACT
Steel shear walls are among the most modern systems in high-rise structures and buildings of great importance. This type of structural system is used in most seismic areas, including Japan, the USA, Canada and Mexico, and is used in two hard and hard types. Steel shear walls have many advantages over similar systems that are resistant to lateral loads, such as bearing capacity, energy dissipation, stiffness and high ductility, and also reduce structural weight and reduce the forces caused by earthquakes to structures. . The hardened steel shear walls have lower execution costs than hardened walls and the use of these types of walls is also more common in the world. One of the innovations used in these types of walls in recent years is the use of corrugated sheets instead of simple sheets. The first application of these types of sheets has been in the beam of sheet piles, and in recent years numerous experiments have been carried out on corrugated steel shear walls. Due to the newness of these types of sheets in the system of steel shear walls, this paper investigates the effect of the wavelength density of these sheets on the frame behavior of it. The results of this paper are based on finite element method using ANSYS software. The results of this study have shown that by increasing the parameter of the wavelengths, the system’s hardness increases. Secondly, the load capacity and energy dissipation are also upward.
INTRODUCTION
Steel shear walls have been used in the construction of high-rise structures in most advanced and seismic countries, including the United States, Japan and Canada, in the last three decades. This system has many advantages over other similar systems, such as concrete shear walls and steel braces. One of the advantages of this system is the high loading capacity, proper ductility, high energy absorption capacity, proper stiffness, structural weight loss and reduced foundation construction costs, better quality and high build speed. The general structure of the steel shear walls is the peripheral members including the beams and columns and the steel filler plates in the space between them. Steel shear walls are of two types: the first type of shear walls is simple or hard, and the second type is the hardened steel shear walls. These systems are in functionally similar to the beam arcs, in this case, the columns play the role of the beam of the beam, the sheet of steel as it lives and the transverse beams, such as the hardening agents in the die.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Masoud Gholizadeh , Yasser Yidollahi
File Information: English Language/ 9 Page / size: 369 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : مسعود قلی زاده ، یاسر یدالهی
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 369
نقد و بررسیها
هنوز بررسیای ثبت نشده است.