توضیحات
چکیده
رله هاي دیستانس مهمترین رله هاي حفاظتی خطوط انتقال به شمار میروند که در شرایط نوسان توان (PS)در سیستم قدرت در معرض عملکرد نابه جا قرار میگیرند. براي جلوگیري از این عملکرد نابه جا، در این رله ها از تابع قفل نوسان توان (PSB)استفاده میشود. یکی از چالش هاي پیشروي این رله در زمان هاي عملکرد تابع ،PSBتشخیص خطاهاي محتمل در حین نوسان توان میباشد. براي این منظور تاکنون روشهاي مختلفی جهت تشخیص خطا در حین نوسان توان براي رله هاي دیستانس خطوط انتقال ارائه شده است. تشخیص خطا در حین نوسان توان در خطوط انتقال جبران شده پیچیدگی هاي بیشتري نسبت به خطوط عادي جبران نشده دارد. علت عمده این مساله استفاده از المان هاي غیر خطی حفاظتی نظیر وریستور اکسید فلزي (MOV)در ساختار خازن سري میباشد. در این مقاله روش جدیدي به منظور تشخیص خطا در خطوط جبران شده با خازن سري ارائه شده است. روش ارائه شده بر مبناي استفاده از مقدار جریان مولفه منفی خط میباشد. با استفاده از این روش انواع مختلف خطا اعم از خطاهاي متقارن و نامتقارن به راحتی در حین نوسان توان و شرایط عادي سیستم قابل تشخیص میباشند. عملکرد روش پیشنهادي بر روي سیستم نمونه مورد بررسی قرار گرفته و نتایج حاصل، کارایی این روش را نشان میدهد.
مقدمه
جبران سازي سري به مفهوم قرار دادن یک عنصر خازنی به صورت سري با خط انتقال به منظور خنثی کردن بخشی از راکتانس سلفی خط میباشد. خطوط انتقال میتوانند توسط خازن هاي سري ثابت یا خازن هاي سري کنترل شده توسط تریستور جبران سازي شوند. افزایش توان انتقالی خط، ارتقاي پایداري سیستم قدرت، کاهش تلفات انتقال، افزایش ظرفیت بارگذاري خط، تقسیم بهتر بار در مسیرهاي موازي و کاهش افت ولتاژ سیستم در حین اختلالات شدید از دلایل فنی نصب خازن هاي سري در امتداد خطوط انتقال میباشند. خازن هاي سري میتوانند در وسط یا طرفین خط انتقال نصب شوند. با قرار دادن خازن هاي سري در طرفین خط انتقال، میتوان از فضاي موجود در پست ها استفاده کرد که این عمل منجر به کاهش هزینه هاي نصب میشود. میزان جبران سازي خط انتقال توسط پارامتري به نام ضریب جبران سازي(k)تعیین میشود.
ABSTRACT
Dismount relays are the most important protection relays for transmission lines that are exposed to power failure in PS power conditions. In order to avoid this function, these relays are powered by the Oscillation Lock function (PSB). One of the challenges ahead of this relay during function performance is the PSB detecting possible errors during power fluctuations. To this end, various methods have been developed to detect errors during power oscillations for relay relays of transmission lines. Error detection during the oscillation of the power in the compensated transmission lines has more complexity than the unrecovered normal lines. The main reason for this problem is the use of nonlinear protective elements such as metal oxide oscillator (MOV) in the serial capacitor structure. In this paper, a new method for detecting errors in lines compensated by a serial capacitor is presented. The proposed method is based on the use of negative flow line flow. By using this method, different types of errors, such as symmetric and asymmetric errors, can be easily identified during power fluctuations and normal conditions of the system. The proposed method function is examined on the sample system and the results show the efficiency of this method.
INTRODUCTION
Series compensation is the concept of inserting a capacitive element in series with a transmission line to neutralize a part of the Salafi line of reactance. Transmission lines can be compensated by constant series capacitors or series capacitors controlled by thyristors. Increasing line power transmission, increasing system power stability, reducing transmission losses, increasing line loading capacity, distributing better load in parallel paths and reducing system voltage drop during severe disturbances due to technical reasons for installing series capacitors along transmission lines. Series capacitors can be installed in the middle or sides of the transmission line. By placing serial capacitors on the sides of the transmission line, you can use the space available in the posts, which will reduce the installation costs. The compensation rate of the transmission line is determined by a parameter called the compensation coefficient (k).
Year: 2016
Publisher : International Conference on Basic Research in Electrical Engineering
By : Sirus Bedli Ghareh Takan
File Information: persian Language/ 14 Page / size: 317 KB
سال : 1396
ناشر : کنفرانس بین المللی تحقیقات بنیادین در مهندسی برق
کاری از : سیروس بدلی قره تکان
اطلاعات فایل : زبان فارسی / 14 صفحه / حجم : KB 317
نقد و بررسیها
هنوز بررسیای ثبت نشده است.