توضیحات
خلاصه
کار گیري سیستمی که تحت تحریکات خفیف، مقاومت وسختی کافی داشته و در تحریکات شدید، شکل پذیري و اتلاف انرژي بالایی از خود نشان دهد از لحاظ ایمنی و اقتصادي به طور وسیعی کاربرد خواهد داشت. در این میان می توان از قابهاي SPSیا EBFنام برد که در هر دو سیستم اعضاي مهار بندي سختی مورد نیاز را تحت تحریکات ضعیف وعضو فیوز مانندهم تحت تحریکات قوي با وارد شدن به مرحله غیر خطی و مفصل شدن، شکل پذیري و اتلاف انرژي مورد نیاز را تأمین می نماید. رفتار این سیستم ها به گونه اي است که سایر اعضاي قاب شامل تیر، ستون و مهار بند در محدودة خطی باقی مانده و امکان بهره برداري مجدد از سیستم سازه اي را تنها با تعویض مجدد فیوز جاري شونده مقدور می سازد. به منطور بررسی عملکرد این سیستم، در تحقیق حاضر، ابتدا یک قاب یک طبقه و یک دهانه با طول فیوز یکسان در سیستم SPSو EBFدر نرم افزار ABAQUSمورد مطالعه قرار گرفت. سپس به منظور بررسی بیشتر تأثیر این سیستم ها در بهبود عملکرد لرزه اي، دو ساختمان 5و 10طبقه دو بعدي در نرم افزار SAPمدل شده و مطالعه گردید. فیوز ها بر اساس رابطه آیین نامه AISC 2005به صورت برشی از پروفیل IPBو IPE اختیار گردید که نتایج حا صله بیانگر شکل پذیري بالاي سیتم SPSدر مقابل EBFمی باشد. همچنین نتایج این بررسی نشان می دهد که فیوزهاي ساخته شده با پروفیل IPBسختی بیشتري نسبت به فیوزهاي IPEاز خود نشان می دهند.
مقدمه
زلزله هاي صورت گرفته در ایران و تخریب بسیاري از سازه هاي فولادي بیانگر عدم توجه به ضوابط لرزه اي و خواص سازه می باشد. خواص خود سازه، بویژه رفتار پسماند و ظرفیت تغیر شکل سازه نقش تعیین کننده اي در پایداري سازه در برابرزلزله دارد. اگر مقاومت و سختی یک سازه تحت بارگذاري متناوب در حوزه غیرارتجاعی ثابت بماند نوع رفتار پسماند را ثابت می خوانند و اگر کاهش یابد آن را کاهنده می نامند. کاهندگی سختی و مقاومت از پایداري لرزه اي کاسته و موجب افزایش جابجا یی سازه در زلزله می شود. بنابراین، در یک سازه هر قدر نرمی (شکل پذیري) بیشتر و خواص پسماند از ثبات زیادتري بر خوردار باشد، درجه پایداري سازه در برابر زلزله زیادتر است. در کشور ما بکارگیري دو سیستم قاب خمشی و قاب مهاربندي هم محور به عنوان سیستم مقاوم در برابر زلزله، پیشینه زیادي دارد. اما هر یک از این سیستم ها داراي محاسن و معایب خاص خود می باشند. قاب خمشی از ظرفیت استهلاك انرژي بالایی به دلیل تشکیل مفصل پلاستیک در دو انتهاي تیرها بر خوردار می باشد، اما مشکل اصلی محدود کردن جابجایی این قابها به دلیل انعطاف پذیري بالاي آن به ویژه در سازهاي بلند می باشد.
ABSTRACT
System operation, which has a mild excitement, sufficient strength and extreme stimulation, ductility and high energy dissipation, will be widely used in terms of safety and economy. These include SPS or EBF frames, which in both systems provide the required hardening elements for weak stimulation and the members of my fuse under intense stimulation by entering into the nonlinear and articulated phase, forming and dissipating the required energy It provides. The behavior of these systems is such that other members of the frame, including the beam, pillar and retaining bracket, remain in the left-hand area and allow the reuse of the structural system by recharging the current fuse. In the present study, we first studied a frame of a floor and a span with the same fuse lengths in the SPS and EBF systems in ABAQUS software. Then, in order to further investigate the effect of these systems on improving seismic performance, two 5th and 10th floor buildings were modeled and studied in SAP software. The fuses were selected in the form of a section of the IPB and IPE profiles based on the rules of the AISC 2005 Regulations, which results in the high uniformity of the SPS system versus EBF. Also, the results of this study indicate that fuses made with IPB profiles show a higher degree of hardness than IPE fuses.
INTRODUCTION
The earthquakes in Iran and the destruction of many steel structures indicate the lack of attention to seismic parameters and structural properties. Properties of the structure, especially the waste behavior and the structure-shaping capacity, have a decisive role in the stability of the structure against earthquakes. If the strength and stiffness of a structure under constant loading in a non-reciprocal zone persists, then the type of residual behavior is proved and if it is reduced, it is called a diminutive. The reduction of hardness and strength reduces seismic stability and increases the displacement of the structure in the earthquake. Therefore, in a structure, the higher the degree of softness (ductility) and the more residual properties of the waste, the greater the stability of the structure against the earthquake. In our country, the use of two frames and folding frame systems as an earthquake resistant system has a large background. But each of these systems has its own advantages and disadvantages. The folding frame has a high energy dehumidification capacity due to the plastic joint formation at the two ends of the beams, but the main problem is limiting the displacement of these frames due to its high flexibility, especially in long instruments.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Navid Wafa , Saeed Pourzini
File Information: English Language/ 8 Page / size: 715 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : نوید وفا ، سعید پورزینلی
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 715
نقد و بررسیها
هنوز بررسیای ثبت نشده است.