توضیحات
چکیده
فولادهاي زنگ نزن آستنيتي، به علت مقاومت به خوردگي عمومي خوب و استحکام نسبتا بالايي که دارند، جايگاه ويژه اي در صنعت پيدا کرده اند. استحاله آستنيت به مارتنزيت در اثر تغيير فرم پلاستيک بر روي خواص مکانيکي اين فولادها تاثير زيادي دارد. لذا مطالعه استحاله مارتنزيتي در فولادهاي فوق از اهميت سزائي برخوردار است. در تحقيق حاضر، بررسي اثرنورد سرد بر استحاله آستنيت به مارتنزيت در دو فولاد AISI 316و AISI 304با استفاده از مطالعات تالوگرافي و سختي سنجي و آزمايش XRDانجام پذيرفت . نتايج بدست آمده نشان داد كه با افزايش ميزان درصد كرنش نورد، فاز مارتنزيت، در هر دو فولاد مذكور به طور پيوسته افزايش مي يابد و اين افزايش، روندي كند شونده دارد. از طرفي مشخص شد كه با افزايش ميزان درصدكرنش، فاز مارتنزيت تشكيل شده در نوع ،AISI 304بيشتر از نوع AISI316 میباشد.
مقدمه
آلياژهاي آهن – نيكل – كروم تحت عنوان فولادهاي زنگ نزن هستند،كه در آب دريا زنگ نمي زنند، در مقابل اسيدهاي غليظ مقاوم اند و در دماهايي تا 1100درجه سانتيگراد پوسته نمي شوند. اين كارآيي منحصر بفرد در تلفيق با خواص مكانيكي خوب و ويژگي هاي ساخت به فولاد زنگ نزن مهمترين دلیل تولید را مي دهد و آن را به يك ابزار غير قابل صرف نظر براي طراحان تبديل مي كند. كاربرد فولاد زنگ نزن در مقايسه با فولادهاي كربني پائين است اما رشد پايداري را نشان مي دهد فولاد زنگ نزن بعنوان يك گروه خيلي غير همگن تراز فولادهاي ساختماني است و خواص آن در بسياري موارد براي طراح ناآشناست. شکل عمده محصولات فولاد زنگ نزن ورقهاي نورد سرد شده است. ساير محصولات تنها 1/3 يا كمتر از كل تعداد ورقهاي نورد سرد شده را تشكيل مي دهند. امروزه فولادهاي زنگ نزن آ يتيستن ، کاربرد وسيعي در صنایع پتروشیمی و صنايع هسته اي و ديگر صنایع پیدا کرده اند اين فولاد ها حدود 70-80درصد كل فولادهاي زنگ نزن را شامل مي شوند و داراي ساختار كاملاً آستنيتي مي باشند. مونگانون و توماس تشكيل فاز مارتنزيت حين آزمايش كشش در فولاد 304را بررسي كردند . نتايج آنها نشان داد كه با افزايش ميزان كشش فاز مارتنزيت افزايش مي يابد . نتايج مشابهي نيز توسط سيتارمن و كريشنن گزارش شده است. درتحقيق حاضر، به مطالعه رفتاردگرگوني فازي در اثر نورد بر روي فولاد هاي زنگ نزن آستنيتي شبه پايدار پرداخته ميشود.
ABSTRACT
Austenitic stainless steels have a special place in the industry due to their good general corrosion resistance and relatively high strength. Austenite transformation to martensite has a significant effect on the mechanical properties of these steels due to the change in plastic form. Therefore, the study of martensitic transformation in these steels is of great importance. In this study, the effect of cold weather on austenite transformation to martensite in two steel AISI 316 and AISI 304 was carried out using thalographic, hardness and XRD tests. The results showed that, with increasing rolling strain percentage, the martensite phase increases steadily in both of these steels, and this increase has a slowing process. On the other hand, it was found that, with increasing percentage rate, the martensite phase of the type, AISI 304 is more than AISI316.
INTRODUCTION
Iron-nickel-chromium alloys are called stainless steels, which do not ring in the water, are resistant to concentrated acids and do not crumble at temperatures up to 1100 degrees Celsius. This unique performance, combined with good mechanical properties and stainless steel construction features, is one of the most important reasons for its production, making it an indelible tool for designers. The application of stainless steel is low compared to carbon steel, but shows a steady growth. Stainless steel is a very heterogeneous group of structural steels, and its properties are unknown to the designer in many cases. The main form of stainless steel products is cold rolled sheets. Other products are only 1/3 or less than the total number of coiled rolling sheets. Today, Ayatthist Stainless Steel has been widely used in the petrochemical, nuclear and other industries. These metals account for about 80-70% of all stainless steel and have a fully austenitic structure. Monganon and Thomas investigated the formation of the martensite phase during the 304 steel tensile test. The results showed that with increasing the tensile strength of the martensite phase, it increased. Similar results have been reported by Sitman and Krishnan. In the present study, we study the fuzzy behavioral transformation by rolling on steady-state austenitic stainless steels.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Abbas Poladadi, Morteza Zand Rahimi, Mohammad Tafali Noghani, Hossein Abbaszadeh, Hossein Ghahrshi
File Information: persian Language/ 9 Page / size: 1.851 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : عباس پولادي ، مرتضي زند رحيمي ، محمدتلافي نوغاني ، حسين عباس زاده ،حسين گهرگزي
اطلاعات فایل : زبان فارسی / 9صفحه / حجم : KB 1.85
نقد و بررسیها
هنوز بررسیای ثبت نشده است.