توضیحات
چکیده
به منظور طراحي ورق كفستون روش هاي متعددي وجود دارد. در كليه ي روشهاي موجود ابتدا بايد شدت تنش توزيع شده در زير كفستون تعيين و سپس با استفاده از روش هاي تحليل سازه به طراحي كف ستون اقدام كرد. در روش هاي سنتي و كلاسيك طراحي با فرض صلب بودن ورق كفستون، توزيع تنش زير آن يكنواخت در نظر گرفته ميشود كه دور از واقعيت است. دستيابي به توزيع واقعي تنش زير كفستون كاري بس دشوار است؛در اين مقاله با استفاده از يك سري فرض هاي ساده شونده، كفستون به يك ورق پايدار تشبيه شده و توزيع تنش زير كفستون به روش تئوري ورقها و آناليز اجزاء محدود محاسبه شده است؛ سپس با بهره گيري از نتايج تحقيقات گذشته، به منظور طراحي ورق كفستون يك شكل توزيع تنش براي كفستون هاي در معرض بار حوري پيشنهاد شده كه بر اساس آن ضخامت كفستون قابل محاسبه است.
مقدمه
يكي از مهمترين اتصالات در سازه هاي فولادي اتصال سازه به فونداسيون يا همان اتصال كفستون است. اهميت اين اتصال به اين دليل است كه رفتار آن بر روي كل سازه تأثير ميگذارد. در طراحي سازه ها معمولاً رفتار اين اتصال به دو صورت مفصل و گيردار فرض ميشود. اتصال مفصلي بايد نيروي برشي و محوري را تحمل كند. در طراحي اين اتصال عمدتاً تحمل نيروي برشي به ميل مهارها يا برشگيرها واگذار و ورق كفستون بر اساس نيروي محوري طراحي ميگردد. به منظور طراحي كفستون بر اساس نيروي محوري، عملكرد آيين نامه ها و اكثر روش هاي موجود چنين است كه ورق كفستون را صلب فرض ميكنند؛ با فرض صلبيت ورق كفستون، توزيع تنش زير كفستون يكنواخت در نظر گرفته شده و با استفاده از روش هاي مختلف تحليل سازه ضخامت كفستون محاسبه ميشود البته برخي از آيين نامه ها صلبيت كفستون را موضعي در نظر ميگيرند كه منطقي به نظر ميرسد.فرض توزيع تنش يكنواخت در زير كفستون يك فرض غيرمنطقي است به اين دليل كه در برخي از نواحي زير كفستون شدت تنش بسيار كمتر از ديگر نقاط و برعكس در برخي قسمت ها شدت تنش بيشتر است. منظور داشتن اين فرضيات (صلبيت ورق و يكنواختي تنش) در طراحي ورق كفستون سبب ميشود كه ضخامت كفستون غير اقتصادي محاسبه شود.
ABSTRACT
There are several methods for designing a queston sheet. In all of the existing methods, firstly, the intensity of the distributed stresses should be determined below the cephalon, and then, using structural analysis methods, the bottom floor design was applied. In traditional and classical design, with the assumption that the cover sheet is rigid, the stress distribution below is considered uniform, which is far from the reality. It is very difficult to achieve real distribution of stress under the damper; in this paper, using a series of simplistic assumptions, the questone is simulated to a stable sheet and the stress distribution of the bottom of the coffeon is calculated by the theory of sheets and finite element analysis; then Using the results of previous studies, for the purpose of designing a queston sheet, a stress distribution model is proposed for quadrants exposed to gravitational load, according to which the thickness of the capstone can be calculated.
INTRODUCTION
One of the most important connections in steel structures is the connection of the structure to the foundation, or the closest connection. The importance of this connection is because its behavior affects the entire structure. In the design of structures, the behavior of this connection is usually assumed to be both joint and creep. Joint joints must bear the shear and axial force. In the design of this coupling, the shear force is mainly applied to the barriers or cutters, and the questone sheet is designed based on axial force. In order to design a questone based on the axial force, the performance of the codes and most of the available methods is such as to assume that the queston plate is rigid. Assuming that the Cuffston sheet is rigid, the distribution of stress under the quartz is considered uniform and using different methods Computational analysis of the thickness of the capstone is computed. Some rules, however, consider Caviton’s rigidity to be local, which seems logical. The fact that uniform stress distribution under the umbrella is unreasonable is unreasonable, because in some areas below the cephalon, the intensity of stress is much less From other points and vice versa, in some areas, the intensity of stress is higher. Having these assumptions (sheet rigidity and uniformity of stress) in the design of the Cuffston sheet causes the non-economical Queston thickness to be calculated.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Fayyad, Alireza, Qoolhestani, Soleiman, Koupehma, Naeem
File Information: persian Language/ 8 Page / size: 504 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : فيوض، عليرضا، قوهستاني، سليمان، كوه پيما، نعيم
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 504
نقد و بررسیها
هنوز بررسیای ثبت نشده است.